drop spindles and sway bar? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72c10 · 03-03-2003, 11:07 AM

I know this is a stupid Question but i want to make sure before I buy spindles. If I lower my truck 2-1/2 inches with spindles do I have to, or would it be best to use the lowerd brackets for the sway bar? Im not sure if the lower brackets are for lowering springs or what.

bagged81 · 03-03-2003, 12:50 PM

The spindles wont affect the swaybar. They just move the hub location up.

Hotrod70C10 · 03-03-2003, 01:48 PM

the sway bar brackets you are talking about are for a lowered truck. They are just closer to the truck so they don't hit the ground. I don't know if you would have to have them with a 2 1/2 drop in the front though.

smokekiki · 03-04-2003, 05:28 PM

I don't have them on my burban with 2.5 drop spindles.My swaybar is in stock brakets.

phantom dually · 03-04-2003, 07:47 PM

Where can I buy the brackets that sit closer to the truck??

smokekiki · 03-05-2003, 09:08 AM

I think early custom classics has them

03-03-2003, 11:07 AM	#1
72c10 Registered User Join Date: Dec 2002 Location: burlington KY Posts: 175	drop spindles and sway bar? I know this is a stupid Question but i want to make sure before I buy spindles. If I lower my truck 2-1/2 inches with spindles do I have to, or would it be best to use the lowerd brackets for the sway bar? Im not sure if the lower brackets are for lowering springs or what.

03-03-2003, 12:50 PM	#2
bagged81 Signals in the bumper. Join Date: Feb 2003 Location: East TN Posts: 856	The spindles wont affect the swaybar. They just move the hub location up. __________________ Jeff C. 1981 Chevrolet Silverado - Under major construction...again. link 1962 Chevrolet Impala 4D Sedan moredoorclassics.com 1936 Ford Pickup - Frame-off in progress link 1979 Chevrolet Camper Special Flatbed link

03-03-2003, 01:48 PM	#3
Hotrod70C10 Low & Slow Join Date: Dec 2002 Location: Oklahoma Posts: 1,047	the sway bar brackets you are talking about are for a lowered truck. They are just closer to the truck so they don't hit the ground. I don't know if you would have to have them with a 2 1/2 drop in the front though. __________________ 70' C-10 LWB Fleetside 4.5/6 drop

03-04-2003, 05:28 PM	#4
smokekiki Mike Join Date: Jan 2003 Location: west chester pa Posts: 2,473	I don't have them on my burban with 2.5 drop spindles.My swaybar is in stock brakets. __________________ 70'c/10, 71 suburban4x4 402bb, 72suburban 4/6 drop, 72k/5 4x4 blazer 4" lift 35 tires

03-04-2003, 07:47 PM	#5
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Where can I buy the brackets that sit closer to the truck?? __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

03-05-2003, 09:08 AM	#6
smokekiki Mike Join Date: Jan 2003 Location: west chester pa Posts: 2,473	I think early custom classics has them __________________ 70'c/10, 71 suburban4x4 402bb, 72suburban 4/6 drop, 72k/5 4x4 blazer 4" lift 35 tires



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.