|
|
|
11-15-2010, 11:05 PM
|
#1 |
|
Registered User
Join Date: Aug 2008
Location: mohave valley,arizona
Posts: 1,088
|
tweed door panels?
ive seen several guys with tweed covered door panels/arm rests etc.
how many linear yards(and 54" wide) of fabric did you guys have to use? i just wanna do my door panels and arm rests. also,when covering how does that process go? glue it on?cause i dont imagine you could staple it on lol. is this material easy to work with(bends,etc) or does it wrinkle a lot etc? please some tips and advice on this would be great!
__________________
1969 Shortbed in progress 1982 short step, few suspension and motor upgrades.getting a 468 1978 Shortbed fleet side bonanza fully loaded 1978 k20 Silverado loaded.currently engine-less 1989 k10 suburban 9" lift 65 nova And more |
|
|
|
11-15-2010, 11:25 PM
|
#2 |
|
Robert Olson Transport
 
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,310
|
Re: tweed door panels?
you may wanna PM stitch and ask that question he does interiors for a living and could tell you how much you would need
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
|
|
|
|
11-16-2010, 11:52 PM
|
#3 |
|
Happy Camper
Join Date: Feb 2006
Location: Northern California
Posts: 8,407
|
Re: tweed door panels?
Why would we slam someones taste? If he likes it... he likes it! I dont like full size disco balls in the cab of my truck so I wont put it there!
__________________
RIP El Jay! Love you brother! |
|
|
|
|
11-17-2010, 12:29 AM
|
#4 | |
|
Robert Olson Transport
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,310
|
Re: tweed door panels?
Quote:
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
|
|
|
|
|
11-17-2010, 12:46 AM
|
#5 |
|
Registered User
Join Date: Sep 2010
Location: Bakersfield,Ca.
Posts: 340
|
Re: tweed door panels?
!@#$%^&*(
__________________
57 Chevy shortbed,327,Muncie 4 speed,12 Bolt rear end(current project) It's your ride build it the way you want !!!!!!!!!! 
Last edited by sandnuriz; 11-17-2010 at 12:48 AM. |
|
|
|
|
11-17-2010, 03:19 PM
|
#6 |
|
Parts and more parts
Join Date: Nov 2003
Location: Lebo, Kansas (middle of nowhere
Posts: 6,821
|
Re: tweed door panels?
I did my whole interior of my truck with a grey tweed. That includes the door panels, arm rests, the cab back panel (jut below the window), the overhead liner, and the bottom part of the dash. I don't remember the yardage, but the material is all glued on with an upholstery glue. If that is not available, the contact cement that you can purchase in a hardware store will suffice, quite well. I used a paint gun that I purchased from Walmart (canister design) and backed off on the nozzle to get a heavy streaming effect. Spray both sides and apply the material. If you want to put a design under the material, get a cellular foam material and cut out the desingn and apply to the door. Spray glue over it and put material down and use a tool like an aluminum screen roller to get the material to follow the designs. I did my doors in a flame design.
__________________
Frank |
|
|
|
|
11-16-2010, 11:22 PM
|
#7 |
|
Kid's Mechanic
Join Date: Nov 2006
Location: Kansas City
Posts: 8,241
|
Re: tweed door panels?
It's your ride build it the way you want !!!!!!!!!!
Just sayin.... |
|
|
|
|
11-16-2010, 11:26 PM
|
#8 |
|
Registered User
Join Date: Sep 2010
Location: Bakersfield,Ca.
Posts: 340
|
Re: tweed door panels?
!@#$%^&*()
__________________
57 Chevy shortbed,327,Muncie 4 speed,12 Bolt rear end(current project) It's your ride build it the way you want !!!!!!!!!!
Last edited by sandnuriz; 11-17-2010 at 12:48 AM. |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
