Patched my cab fresh air vents - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bcutt · 11-20-2010, 09:13 PM

Made some progress on my cab today. Most would have deemed this cab junk but I was up for the challenge. Front & rear cab supports, front & rear floor pans, pillars, kick panels, cab corners, and soon to be cowl panel, inner roof panel and a roof skin

In GA there are no rust free cabs unless you make one

Hubscrub · 11-20-2010, 09:43 PM

cool nothing wrong with saveing it

you got the roof skin cut too? looks like it in the pic

bcutt · 11-20-2010, 09:47 PM

yep the roof skin is gone.. Drilled the spot welds on the drip rails and took them off too.

57larry · 11-20-2010, 09:48 PM

nice work, keep us posted

srea76 · 11-20-2010, 10:30 PM

I replaced my roof skin as well. How do you plan on putting the new one in?

swamp rat · 11-20-2010, 10:35 PM

Subscribed!! and nice work too.

67chevy1series · 11-20-2010, 11:11 PM

thank you you have saved one any one who saves one is a good guy in my book

bcutt · 11-21-2010, 09:12 AM

Quote:

Originally Posted by srea76

I replaced my roof skin as well. How do you plan on putting the new one in?

I plan on spot welding it around the drip rails and then welding the seam up in the rear. First I need to weld in the inner roof panel and repair some other rust along the drip rails. I would love to use some panel adhesive and glue it in place but the application gun and crap is expensive as hell!

srea76 · 11-21-2010, 10:17 AM

Quote:

Originally Posted by bcutt

I plan on spot welding it around the drip rails and then welding the seam up in the rear. First I need to weld in the inner roof panel and repair some other rust along the drip rails. I would love to use some panel adhesive and glue it in place but the application gun and crap is expensive as hell!

I was curious because I did the spot welding also. It turned out looking nice, but I seen another build where they used the auto adhesive. It would look better, but I never checked on the price of it all. One thing I would recommend that I overlooked is to pack that thing with sound deadener. I just put a factory piece back in there, but after wards wish, since it was open, I would have covered it all.

bcutt · 11-21-2010, 10:28 AM

Quote:

Originally Posted by srea76

I was curious because I did the spot welding also. It turned out looking nice, but I seen another build where they used the auto adhesive. It would look better, but I never checked on the price of it all. One thing I would recommend that I overlooked is to pack that thing with sound deadener. I just put a factory piece back in there, but after wards wish, since it was open, I would have covered it all.

Thanks man, I've checked yours out before and it turned out great. I will definitely be packing it with sound deadener while I'm in there. I'm also going to hit it with a couple coats of Epoxy Primer followed by a couple coats of Eastwoods Heavy Duty Anti Rust which is basically body wax. She has a lot of rust issues, once I fix them I don't ever want to think about rust again

redbaron69 · 11-21-2010, 10:43 AM

looks great. GA sounds like WNC rust everywere.

oldblue1968chevy · 11-20-2010, 11:55 PM

wow lots of hard work!

**Dieselwrencher** · 11-21-2010, 12:39 AM

Nice work, and keep up the great work!

**special-K** · 11-21-2010, 09:27 AM

Keep'em alive! That's what it's all about.Nice work.

Littletony · 11-21-2010, 09:34 AM

Very nice work.

11-20-2010, 09:13 PM	#1
bcutt Registered User Join Date: Aug 2008 Location: North GA Posts: 400	Patched my cab fresh air vents Made some progress on my cab today. Most would have deemed this cab junk but I was up for the challenge. Front & rear cab supports, front & rear floor pans, pillars, kick panels, cab corners, and soon to be cowl panel, inner roof panel and a roof skin In GA there are no rust free cabs unless you make one Attached Images __________________ "Some of my finest hours have been spent on my back veranda, smoking hemp and observing as far as my eye can see." - Thomas Jefferson 72 C10 SWB "Work in Progress"

11-20-2010, 09:43 PM	#2
Hubscrub Cruzin Join Date: Dec 2009 Location: on the road Posts: 2,835	Re: Patched my cab fresh air vents cool nothing wrong with saveing it you got the roof skin cut too? looks like it in the pic __________________ Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14

11-20-2010, 09:47 PM	#3
bcutt Registered User Join Date: Aug 2008 Location: North GA Posts: 400	Re: Patched my cab fresh air vents yep the roof skin is gone.. Drilled the spot welds on the drip rails and took them off too. Attached Images __________________ "Some of my finest hours have been spent on my back veranda, smoking hemp and observing as far as my eye can see." - Thomas Jefferson 72 C10 SWB "Work in Progress"

11-20-2010, 09:48 PM	#4
57larry Registered User Join Date: Nov 2007 Location: Indianapolis Posts: 1,161	Re: Patched my cab fresh air vents nice work, keep us posted

11-20-2010, 10:30 PM	#5
srea76 Registered User Join Date: Nov 2009 Location: Hazlehurst, Ga. Posts: 822	Re: Patched my cab fresh air vents I replaced my roof skin as well. How do you plan on putting the new one in? __________________ 1972 Custom Deluxe LT1 Gen V Swap "Green Lantern" 1984 Silverado Red Baron-72 c10 Project

11-20-2010, 10:35 PM	#6
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Patched my cab fresh air vents Subscribed!! and nice work too. __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's Last edited by swamp rat; 11-20-2010 at 10:36 PM.

11-20-2010, 11:11 PM	#7
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Patched my cab fresh air vents thank you you have saved one any one who saves one is a good guy in my book

11-21-2010, 10:43 AM	#11
redbaron69 Registered User Join Date: Jan 2009 Location: marion nc Posts: 588	Re: Patched my cab fresh air vents looks great. GA sounds like WNC rust everywere. __________________ 69 short fleet 350/350 "under construction" 70 short step 307/3 speed

11-20-2010, 11:55 PM	#12
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Patched my cab fresh air vents wow lots of hard work! __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

11-21-2010, 12:39 AM	#13
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,143	Re: Patched my cab fresh air vents Nice work, and keep up the great work! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

11-21-2010, 09:27 AM	#14
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Patched my cab fresh air vents Keep'em alive! That's what it's all about.Nice work. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-21-2010, 09:34 AM	#15
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 597	Re: Patched my cab fresh air vents Very nice work. __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.