A/C and Heat

[SFTorange]

Hello,

I've been reading a lot of posts lately about air conditioning, and I can't seem to find an answer to this question. I've looked into Old Air and Vintage Air, but I am really concerned about the functionality of the heaters in these systems. I live in Montana (where it's currently 5 below), and I worry that the heaters on the aftermarket a/c units are just an afterthought. I've also noticed that the aftermarket setups don't bring in outside air either which can wreak havoc on defrosting.

It seems like a factory system could solve some of my problems, but I worry about the time an expense to install a factory setup.

Thoughts?

[Captainfab]

What year of truck do you have? Which heater does it currently have? The deluxe heaters generally work pretty good in the pickups. In the Suburbans however, in the bitter clod, they don't quite cut it.

[markeb01]

Same response for those that only view one website:

It has been my experience that if you want aftermarket A/C and live in a climate that gets really cold in the winter, you need both a factory heater and a separate A/C system. The heater that came in the Old Air Hurricane system I installed in my 1960 GMC was useless in temperatures below freezing. It not only didn’t clear the windshield it was incapable of generating enough heat to ever make the cab comfortable. I also had a lot of problems with the A/C system, and after fighting with it for two years pulled it all out and threw it away. If I were to do it again I’d use one of the under dash knee freezer style systems and keep the original factory heater.

If you can find a complete original factory A/C-heater system designed for your truck that might be the best option, but may be hard to find and very expensive.

[SFTorange]

My truck is a 1966 C20 with the deluxe heater. I've had no complaints over the years with the heater/defrost in cold weather. Living in Montana, we have very hot, dry summers and cold winters so I'm looking for the best of both worlds so I can drive my truck as much as possible.

I'm beginning to lose faith in the aftermarket units from the responses I've gotten. I'll have to look further into the factory a/c setups. Ideally I'd like to upgrade a factory setup with more modern, efficient components. I'm definitely not an expert in a/c so I'm not sure what that would take.

[Clyde65]

I have the Old Air Products unit, the AC is great, the heat is so/so at best, but is fine for Texas. If I were in Montana or where ever aand it got to say below 20 degrees regularly, the truck would stay in the garage and I would drive the rice burner.

[K-TEN]

I like Markb's approach. Why compromise both systems? Use the Factory heater and defroster. They are PROVEN to work over long periods of time with little or no maintenance. Defroster is all set up. And the heat will blast you out an a cold Winter morning-after some warm-up time!
Vintage air makes the Mark IV underdash AC unit, which been around for a long time. It was the best way to get AC in your car for decades, if your were too cheap to get it from the factory or the car just didn't have it. It's $299 bucks and in a pickup, should absolutely freeze you out, because they cooled big 60's sedans easily and they had a lot more volume of air to cool. Simple to install, looks really good in my opinion, and is self contained. Add the compressor, etc and you're ready to rock.
If you have a 6 cylinder still in the truck, they carry compressor brackets for Chevy and GMC early 6's and also for the later 6's. And no I don't work for these people and have no monetary interest in what you purchase.
I like my trucks stock, and I like this setup the best, because it doesn't change anything about the original truck except for adding the compressor, but you'd have to do that for any ac system, stock, aftermarket or refit.
http://www.vintageair.com/catalog10/...ge%2022%29.pdf

[Scottshotrods]

The vintage air product will work pefect for your cold weather in Montana 100%
perfect.E-mail us if you have any questions on there product.We are dealers and have great prices for members here as well.
justin@scottshotrods.com
justin

[raycow]

Add my vote for installing underdash A/C only and keeping the factory heater. It will cost less too.

Ray

[jimmydean]

I am having a similar issue because I need to find a heater to replace my stock one when I swap out the hood hinges.

I don't need AC, that's what windows are for. It doesn't get THAT cold around here, but I do use a heater about 5 months out of the year. Anyone try a hokey cig lighter one or anything? I don't care about looks, I would stash it when parked anyway.

[astrochimp]

Originally Posted by jimmydean

I am having a similar issue because I need to find a heater to replace my stock one when I swap out the hood hinges.

Check out the Jeep guys.

I don't remember the heater they use, but IIRC it is available at summit (saw them in some catalog last summer)

[MalibuKasey]

anybody have a pic of this installed in there truck?

[jimmydean]

I was looking at this:
http://www.heatercraft.com/ProductIn...ductid=209-H-C



Vent one to the defroster and the other to the feet. Tuck it under the dash and call it good. JC Whitney has it for $182 and it's smaller than the Vintage Air under dash setup.

[Captainfab]

Haha those guys are local to me. I've never looked at their products though. I didn't realize they made heaters that could be used in autos.

Originally Posted by jimmydean

I was looking at this:
http://www.heatercraft.com/ProductIn...ductid=209-H-C



Vent one to the defroster and the other to the feet. Tuck it under the dash and call it good. JC Whitney has it for $182 and it's smaller than the Vintage Air under dash setup.

[Ghostwhite]

I'd be interested in one of those if I knew they worked well. My stock heater motor and motor cage is shot and I haven't found a replacement cage online, only the motor itself. I would even consider switching to a recirc heater but I don't have any parts yards around to collect parts for it.

I need heat!

[jocko]

This is a great thread!

I'm in the middle - I want to install the chrome under-dash unit (moving to the Cali desert in a few months....) but I ALSO want to get rid of the factory Deluxe Heater that protrudes intot he engine compartment.

I've heard folks talk about using a Fiero unit for our trucks?? Anyone else hear of that.

So, to sum up my rambling, I have 2 questions:

1) If one uses that nice lookin chrome vintage air under dash unit, the comments above would lead one to believe that the only additional mod would be to mount a compressor. What about the evap canister, etc etc etc. and all that extra jazz? I'm not real familiar with the old units - ais the compressor the only external part and the rest is interal to the chrome box? (would love to see some rough install/plumbing instrucitons for that thing).

2) If I go the vintage air old school lookin route, I still need a heater - and I want to get rid of the eyesore (sorry purists) tophat-looking thingamabob that covers up half my engine. Any recommendations? (maybe just install the "non-deluxe" factory heater option if I could find it? I have the deluxe air box in the negine compartment, but only have the single knob controller in the dash. Hmm.

Thanks gents.

[jocko]

Regarding question #2 - I just found this in my "archives"....

Markeb01 and Txfirefighter had posted some great info on this question that I couldn't find earlier - here they are for your ref (but I'm still looking for some info on question #1 (or #2 if you have more)):

http://67-72chevytrucks.com/vboard/s...economy+heater

http://67-72chevytrucks.com/vboard/s...107362&page=32

Seems some forgetful idiot forgot he's already asked this question....
http://67-72chevytrucks.com/vboard/s...=1#post3584063

[jimmydean]

Originally Posted by Captainfab

Haha those guys are local to me. I've never looked at their products though. I didn't realize they made heaters that could be used in autos.

I just saw someones build thread that used one and it looked awesome. I'll see if I can find the build thread it was in (73-87 white truck with flames). I have a few more interior parts to get, but this is high on my list. Especially with some 25 degree mornings forecast soon.


<edit>
Found it

http://67-72chevytrucks.com/vboard/s...6&postcount=66

[TR65]

SFTorange,

I just installed a VintageAir GenIV Magnum in my 65. I don't have the air hooked up yet but I do have the heater going.

At 12 degrees F the other morning driving to work at 70 mph I was toasty and I didn't have the fan all the way up.

My truck is not well sealed either. This unit has great heat.

The secret might be the fan, it is really big and will move some air.

With the air hooked up it is supposed to deliver de-humidified air for the defroster.

TR

[Heater63]

Question for TR:
Not to highjack, but TR, the Gen IV Magnum you used, is it for the 67+ ? I dont see it on their website for 60-66. If so, how did it fit in your 65?

I really like the idea of the Gen IV and electronic controls with modern switches. I want to do away with the stock sliding lever controls/cables.
My '63 cab is stripped bare, I can easily make modifications if needed.

Is that why you chose the Gen IV over the Sure-Fit made for the 60-66?

Thanks,
Tad

[astrochimp]

Originally Posted by jimmydean

I just saw someones build thread that used one and it looked awesome. I'll see if I can find the build thread it was in (73-87 white truck with flames). I have a few more interior parts to get, but this is high on my list. Especially with some 25 degree mornings forecast soon.


<edit>
Found it

http://67-72chevytrucks.com/vboard/s...6&postcount=66

That is the one the jeep offroad guys recommend, I though Mohave air was the brand

[protrash64]

jocko: You would have to mount a compressor, condensor, and a drier to complete an underdash unit. I have one in my 'burb installed by the PO.

[jimmydean]

Originally Posted by astrochimp

That is the one the jeep offroad guys recommend, I though Mohave air was the brand

I think a number of companies put their name on them, but it's the same box. The price from Summit seems to be the best I've found.

My luck by the time I get around to installing it, the weather will be warmer.

[jocko]

that's great, thansk very much rbar!

[TR65]

SFT,

Here are some pics of the Vintage Air Gen IV Magnum in my 65.

It is a big unit and I mounted it as high and as far to the left as possible. It does not interfere with the passenger foot box and is not very noticeable sitting in the truck.

Most of the glove box is used up and I believe it would interfere with the radio if it was in the stock position. My radio is mounted in the channel for the vents. My objective is not to modify the dash.

The controls work really well, you can put air anywhere you want it in whatever quantity you want.

The heater works very well. I am mounting the condenser currently so the air conditioning is not working yet.

TR

[TR65]

Here are a couple of more pics.

The solenoid valve on the firewall side is to cut off the hot water when using max air conditioning.

TR