Control arm shaft hardware - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SCOTI · 11-29-2010, 11:00 PM

Anyone know where can I find the hardware for the post-73 style control arm shafts? I'm looking for some 'new' freshly plated hardware for my a-arms (just the washers & nuts that keep the shaft bushings in place).

stefan · 11-30-2010, 02:44 AM

Vernons alignment in Ft Worth will have it and if not Randy will get it or tell you where to get it 817 737 5801

SBTork · 11-30-2010, 01:56 PM

when I did mine a few months back, I ordered new GM nuts and powdercoated the stock washers.

**lolife99** · 11-30-2010, 03:10 PM

What about these guys?
http://www.totallystainless.com/

SCOTI · 11-30-2010, 03:21 PM

Quote:

Originally Posted by lolife99

What about these guys?
http://www.totallystainless.com/

1st place I checked but they list complete packages vs independent pieces. I have a catalog I'm going to sort through & see if they break down farther than what the web indicates. I figured it would be worth asking on here to see if there were possibly any 'local' alternatives.

Thanks....

**lolife99** · 11-30-2010, 04:09 PM

My other choice would be these guys:
http://www.gardner-westcott.com/automotive_nuts.htm
http://www.gardner-westcott.com/automotive_washers.htm

SBTork · 11-30-2010, 07:53 PM

If it helps...

Nut.....6.69 each PN 9422308
Retainer (washer).....N/A PN 337940

the washers have been discontinued

SCOTI · 12-01-2010, 11:57 PM

I wound up getting some 'shallow' nylock style nuts for the upper a-arms @ Fastenall.

I painted the OE style washers & will add some SS washers behind the nylock nuts to keep things from getting all scratched up (whole chassis is done that way).

11-29-2010, 11:00 PM	#1
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,082	Control arm shaft hardware Anyone know where can I find the hardware for the post-73 style control arm shafts? I'm looking for some 'new' freshly plated hardware for my a-arms (just the washers & nuts that keep the shaft bushings in place). __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

11-30-2010, 02:44 AM	#2
stefan New Member Join Date: Sep 2006 Location: texas Posts: 118	Re: Control arm shaft hardware Vernons alignment in Ft Worth will have it and if not Randy will get it or tell you where to get it 817 737 5801

11-30-2010, 01:56 PM	#3
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,855	Re: Control arm shaft hardware when I did mine a few months back, I ordered new GM nuts and powdercoated the stock washers. __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

11-30-2010, 03:10 PM	#4
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,701	Re: Control arm shaft hardware What about these guys? http://www.totallystainless.com/ __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

11-30-2010, 04:09 PM	#6
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,701	Re: Control arm shaft hardware My other choice would be these guys: http://www.gardner-westcott.com/automotive_nuts.htm http://www.gardner-westcott.com/automotive_washers.htm __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 11-30-2010 at 04:11 PM.

11-30-2010, 07:53 PM	#7
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,855	Re: Control arm shaft hardware If it helps... Nut.....6.69 each PN 9422308 Retainer (washer).....N/A PN 337940 the washers have been discontinued __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

12-01-2010, 11:57 PM	#8
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,082	Re: Control arm shaft hardware I wound up getting some 'shallow' nylock style nuts for the upper a-arms @ Fastenall. I painted the OE style washers & will add some SS washers behind the nylock nuts to keep things from getting all scratched up (whole chassis is done that way). __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.* Last edited by SCOTI; 12-01-2010 at 11:57 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.