|
|
|
12-20-2010, 02:00 AM
|
#1 | |
|
Registered User
Join Date: Nov 2010
Location: Northeast Pennsylvania
Posts: 334
|
1967 c-10 4x4 build
so, i bought this truck on the cheap with plans to have it looking like new, (or pretty d*mn nice at least) by junior year. i'm hoping this truck can be my senior project, but being a freshman, i need to talk that over with the school district. but i have plans for this truck, and i figured why not document it step by step, like you guys do on here? so i started out by making a video a week or so ago. here it is :
i have hopes on getting this truck as solid and shiney as a truck that rolled out of the factory yesterday. so tomorrow ill post the pictures of the stuff i did yesterday, because my image host is a PITA and i have school tomorrow(technically today). so thats a good start for now. hopefully i can get a trip to the junkyard sometime this week to get another c-10 emblem for the pass side, the chevrolet for the hood, and maybe a body panel or two depending on how they look. im going to try to make most of this build in video format, so it can be followed on youtube too. we'll see how it works out.
__________________
1967 K-10 4x4 with a 3" lift and 35" BFG mud terrains  Quote:
 want to see some slow progress on my truck? http://67-72chevytrucks.com/vboard/s...d.php?t=436560 <-click there Last edited by jakeblues652; 12-20-2010 at 02:01 AM. |
|
|
|
|
12-20-2010, 02:34 AM
|
#2 |
|
Registered User
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
|
Re: 1967 c-10 4x4 build
well any interior pics i have seen the exterior
Last edited by 67chevy1series; 12-20-2010 at 02:10 PM. |
|
|
|
|
12-20-2010, 06:13 PM
|
#3 | ||
|
Registered User
Join Date: Nov 2010
Location: Northeast Pennsylvania
Posts: 334
|
Re: 1967 c-10 4x4 build
Quote:
low&slow :thanks! like i said, i hope to record most of it on video, tyhen post the youtube links to each step. we'll see how it works out, but as of now, i have a ton of pictutres, and a couple videos!
__________________
1967 K-10 4x4 with a 3" lift and 35" BFG mud terrains Quote:
want to see some slow progress on my truck? http://67-72chevytrucks.com/vboard/s...d.php?t=436560 <-click there Last edited by jakeblues652; 12-20-2010 at 06:14 PM. |
||
|
|
|
|
12-20-2010, 06:43 PM
|
#4 | |
|
Registered User
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
|
Re: 1967 c-10 4x4 build
Quote:
|
|
|
|
|
|
12-20-2010, 10:51 PM
|
#5 | |
|
Account Suspended
Join Date: Jan 2009
Location: Kuna, Idaho
Posts: 1,046
|
Re: 1967 c-10 4x4 build
Quote:
|
|
|
|
|
|
12-20-2010, 11:16 PM
|
#6 | |
|
Registered User
Join Date: Nov 2010
Location: Northeast Pennsylvania
Posts: 334
|
Re: 1967 c-10 4x4 build
   that is the most recent thing that i did. the front emblem and rear drums are next..and i need to find the big jack for that. that will be the fun part... 
__________________
1967 K-10 4x4 with a 3" lift and 35" BFG mud terrains Quote:
want to see some slow progress on my truck? http://67-72chevytrucks.com/vboard/s...d.php?t=436560 <-click there |
|
|
|
|
|
12-20-2010, 02:36 AM
|
#7 |
|
Account Suspended
Join Date: Jan 2009
Location: Kuna, Idaho
Posts: 1,046
|
Re: 1967 c-10 4x4 build
Not bad at all. Runs good and looks good. Be a great project once you get to workin on her. Good luck and take lots of pictures.
|
|
|
|
|
12-20-2010, 11:26 PM
|
#8 | |
|
Registered User
Join Date: Nov 2010
Location: Northeast Pennsylvania
Posts: 334
|
Re: 1967 c-10 4x4 build
 theres the emblem set up there for picture purposes. it looks low, dosent it??? i thought it looked low, but i dont really mind. it gives it character   the only interrior shot i have as of now. i will try to get more soon!
__________________
1967 K-10 4x4 with a 3" lift and 35" BFG mud terrains Quote:
want to see some slow progress on my truck? http://67-72chevytrucks.com/vboard/s...d.php?t=436560 <-click there |
|
|
|
|
|
12-20-2010, 11:35 PM
|
#9 |
|
Registered User
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
|
Re: 1967 c-10 4x4 build
they key hole for the ignition is it drilled bigger or something if not then i think you have a 68 cab and 67 doors
|
|
|
|
|
12-20-2010, 11:43 PM
|
#10 | ||
|
Registered User
Join Date: Nov 2010
Location: Northeast Pennsylvania
Posts: 334
|
Re: 1967 c-10 4x4 build
Quote:
__________________
1967 K-10 4x4 with a 3" lift and 35" BFG mud terrains Quote:
want to see some slow progress on my truck? http://67-72chevytrucks.com/vboard/s...d.php?t=436560 <-click there |
||
|
|
|
|
12-20-2010, 11:51 PM
|
#11 |
|
Registered User
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
|
Re: 1967 c-10 4x4 build
wll then t is definatley a 68 cab the emblems look nice were the holes there when you got it or did you drill them and fill the original ones
|
|
|
|
|
12-21-2010, 12:02 AM
|
#12 | |
|
Registered User
Join Date: Nov 2010
Location: Northeast Pennsylvania
Posts: 334
|
Re: 1967 c-10 4x4 build
thats where the holes were when i got it.
__________________
1967 K-10 4x4 with a 3" lift and 35" BFG mud terrains Quote:
want to see some slow progress on my truck? http://67-72chevytrucks.com/vboard/s...d.php?t=436560 <-click there |
|
|
|
|
|
12-21-2010, 12:06 AM
|
#13 |
|
Registered User
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
|
Re: 1967 c-10 4x4 build
huh well the crome on the emblems look good for being take offs
|
|
|
|
|
12-28-2010, 06:29 PM
|
#14 | |
|
Registered User
Join Date: Nov 2010
Location: Northeast Pennsylvania
Posts: 334
|
Re: 1967 c-10 4x4 build
its been a while, but i got the oil pan gasket replaced, and its not leaking(yet!). while i was down there i painted the dust shield chevy orange, and i learned that the t-case and tranny were painted under all the oily mess. tomorrow i hope to replace the wheel cylinder, as one of them is bad.
__________________
1967 K-10 4x4 with a 3" lift and 35" BFG mud terrains Quote:
want to see some slow progress on my truck? http://67-72chevytrucks.com/vboard/s...d.php?t=436560 <-click there |
|
|
|
|
|
12-29-2010, 04:57 PM
|
#15 |
|
Registered User
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
|
Re: 1967 c-10 4x4 build
sweet do you have any pics
|
|
|
|
|
12-29-2010, 05:37 PM
|
#16 | |
|
Registered User
Join Date: Nov 2010
Location: Northeast Pennsylvania
Posts: 334
|
Re: 1967 c-10 4x4 build
i took some, but for some reason i can't find them. ill snap some more tomorrow.
__________________
1967 K-10 4x4 with a 3" lift and 35" BFG mud terrains Quote:
want to see some slow progress on my truck? http://67-72chevytrucks.com/vboard/s...d.php?t=436560 <-click there |
|
|
|
|
|
12-29-2010, 11:38 PM
|
#17 |
|
Registered User
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
|
Re: 1967 c-10 4x4 build
alright sounds good
|
|
|
|
|
12-30-2010, 12:27 AM
|
#18 |
|
Registered User
Join Date: May 2009
Location: Carmichael, California
Posts: 576
|
Re: 1967 c-10 4x4 build
Alright great progress. That emblem does look really low that's weird. looking forward to pics.
__________________
Eric   1967 C10 LWB SOLD....  1995 Ford F-250 4x4 Powerstroke, 342k "Each generation goes further than the generation preceding it because it stands on the shoulders of that generation. You will have opportunities beyond anything we've ever known." -Ronald Reagan |
|
|
|
|
12-30-2010, 12:34 AM
|
#19 |
|
Registered User
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
|
Re: 1967 c-10 4x4 build
well the PO was hoping he could make the chevy eye level
|
|
|
|
|
12-30-2010, 12:41 AM
|
#20 | |
|
Registered User
Join Date: May 2009
Location: Carmichael, California
Posts: 576
|
Re: 1967 c-10 4x4 build
Quote:
__________________
Eric 1967 C10 LWB SOLD.... 1995 Ford F-250 4x4 Powerstroke, 342k "Each generation goes further than the generation preceding it because it stands on the shoulders of that generation. You will have opportunities beyond anything we've ever known." -Ronald Reagan |
|
|
|
|
|
12-30-2010, 12:25 AM
|
#21 |
|
6>8 Plugless........
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,142
|
Re: 1967 c-10 4x4 build
Nice truck! I can remember when I got my first 4x4. It was a 69 3/4 ton white, 350 4 speed, but mine was in worse shape. Enjoy the truck and the fixing up process!
__________________
Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project Tired of spark plugs? Check this out. |
|
|
|
|
12-30-2010, 05:47 PM
|
#22 | |
|
Registered User
Join Date: Nov 2010
Location: Northeast Pennsylvania
Posts: 334
|
Re: 1967 c-10 4x4 build
 after it was taken apart-replacing the wheel cylinder.  i dont know if you can see that, but there is a crack in the boot, and the inside is rusted.  bondo cracks-i hope to get panels to get rid of the bondo. there is bondo in the bottom of Driver and passenger doors, and it also needs rockers.  i found the old pinkslip. i learned that it came all the way from Reading PA. and the start to my reciept collection
__________________
1967 K-10 4x4 with a 3" lift and 35" BFG mud terrains Quote:
want to see some slow progress on my truck? http://67-72chevytrucks.com/vboard/s...d.php?t=436560 <-click there |
|
|
|
|
|
12-30-2010, 06:04 PM
|
#23 |
|
Registered User
Join Date: Mar 2010
Location: a t w a t e r cali 95301
Posts: 10,713
|
Re: 1967 c-10 4x4 build
o nice pics you havent mounted the other bow tie emblem
|
|
|
|
|
12-30-2010, 06:23 PM
|
#24 | |
|
Registered User
Join Date: Nov 2010
Location: Northeast Pennsylvania
Posts: 334
|
Re: 1967 c-10 4x4 build
i havent mounted either! i dont know if im going to. i really like the look without trim or emblems. it looks clean. and i dont want to put them on until i do the body-the spot where the other one should be mounted is bondo'd thick and i do not like it one bit!
__________________
1967 K-10 4x4 with a 3" lift and 35" BFG mud terrains Quote:
want to see some slow progress on my truck? http://67-72chevytrucks.com/vboard/s...d.php?t=436560 <-click there |
|
|
|
|
|
12-30-2010, 07:04 PM
|
#25 | |
|
Registered User
Join Date: Nov 2010
Location: Northeast Pennsylvania
Posts: 334
|
Re: 1967 c-10 4x4 build
oh, and i think i need some name ideas for this project
maybe when shes all grown up, she'll get a sticker for the back window
__________________
1967 K-10 4x4 with a 3" lift and 35" BFG mud terrains Quote:
want to see some slow progress on my truck? http://67-72chevytrucks.com/vboard/s...d.php?t=436560 <-click there |
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
