Best place to buy 3 hole 67-68 dash bezel

[oldblue1968chevy]

Going to redo my guages. My truck is a 68. Its 3 hole cluster with lights/wipers on the left. Can I get a bezel with grey edges, or just chrome? I plan on getting an extra 3 hole bezel from a 69-70 at the junkyard, and build it while I drive mine, then swap them over when I get finished.

So wheres the best/cheapest place to get my bezel from? And any tips/tricks or anything else I should order (just a driver truck).

I REALLY want the lights/wipers on the same side, but if they dont make it thats ok too

Thanks

[oldblue1968chevy]

Anyone? I know you frame off guys redo the clusters, where've you found the cheapest (i assume there all the same quality) bezels? repro that is

[Tim Christian]

No one repoduces the 67-68 in a 3-hole but you can buy a 69-72 3- hole I know Top Banana has them.

[oldblue1968chevy]

I forgot about you guys! Havent ordered from ya since ya moved. ballpark price on guage cluster bezel from top bananna? (i'll go look now thanks)

[oldblue1968chevy]

Top bannana has them for $40, not bad. May get a shirt too.

Will the 69+ bezel fit my 68 no problems? You wouldnt know of any promotional codes either right off would you.. I have ordered alot of patch pannels from you guys in the past...

[magwakeenercew2jh]

Originally Posted by oldblue1968chevy

Top bannana has them for $40, not bad. May get a shirt too.

I have an original if you want to clean it up and paint it.
Posted via Mobile Device

[oldblue1968chevy]

Mmmm, I found one at the junkyard, I can probably get it for like 5 bucks (hes cheap) but if that dont work out i'll get to ya!

[oldblue1968chevy]

Ordered 1 tonite from top banana. 69-72 3 hole

Hopefully they throw some cool stickers in there Any tips on redoing my cluster?

[67chevy1series]

i dont understand top bananna is on this truck site they no theres a difference from the 67 knobs and 68 72 and the cst emblems , why dont they make the correct peices?

[oldblue1968chevy]

huh lol

i normally like to talk to somebody on the phone (ask for tim christian) but it was late and my dads leaving for a few days, so if we get a big snow next week (like they are predicting) i'll have something to do lol

[72MARIO]

The 67 knobs are 1 year only how many could they ever sell ?

[Hubscrub]

are you gonna try to drill the hole out? i'm sure you could do it SLOWLY just a thought it woundn't have the wording above the hole thought (assuming it does on a stock one)

[67chevy1series]

Originally Posted by 72MARIO

The 67 knobs are 1 year only how many could they ever sell ?

i can im agine alot because i have talked to many of these 67 truck owners and they are all displeased with the fact they dont sell 67 stuff

[Hubscrub]

Originally Posted by 67chevy1series

i can im agine alot because i have talked to many of these 67 truck owners and they are all displeased with the fact they dont sell 67 stuff

who likes 67's anyways?

[67chevy1series]

hey shall i some how contact your wife ,lets just say you might be in the dog house! just jokin hub!

[Hubscrub]

i really do like 67s i like the front ends more than any really

[oldblue1968chevy]

I dont plan on drilling anything. Im going to try to do just like 67chevy1series did I thought?

Gonna put the choke under the dash somewhere?..

[oldblue1968chevy]

Ok, Hey rick how do I get the light knob off?

[67chevy1series]

i would just pull it you ight have to turn it and then pull it because the shaft is at the end of the knob

[oldblue1968chevy]

^^Wuhh lol

[67chevy1series]

you will probably have to turn and pull at the same time

[LandonL]

To get the light shaft out, reach around the back and there should be some sort of push button on top of switch assembly. Once it's pressed hard enough you should be able to pull the light switch knob out. It's takes a little more effort than you think, just keep working with it. Make sure your battery's disconnected or your lights may be on for as long as you have the shaft out.

[67chevy1series]

Originally Posted by LandonL

To get the light shaft out, reach around the back and there should be some sort of push button on top of switch assembly. Once it's pressed hard enough you should be able to pull the light switch knob out. It's takes a little more effort than you think, just keep working with it. Make sure your battery's disconnected or your lights may be on for as long as you have the switch out.

thanks landonl i havent had to do this yet when i got my cab the cluster was out of it

[oldblue1968chevy]

^Thanks I"ll go try it now (yeah i realized my lights were on while I was tinkering..and i turned the key on and my wipers came on lol

thanks guys

I ordered the bezel last nite,Im going to paint my needles clean up under cluster etc etc and then when bezel comes in i'll be allll ready

[67chevy1series]

thats the way to do it