|
|
|
01-08-2011, 12:37 PM
|
#1 |
|
Registered User
Join Date: Jul 2005
Location: Saskatchewan
Posts: 189
|
6L90E yokes
Maybe this is covered somewhere already and if so, please post the link.
Where can I source a yoke for the 6L90E? From pics I've seen it looks as though the factory yoke is a non-sliding one but the driveshaft on my truck needs a sliding yoke. Is the solution finding a yoke that fits the driveshaft or a driveshaft that fits the trans?
__________________
Stu- 1981 GMC Sierra Classic LWB 355- original 2 bolt block, 10.2:1, vortec heads, Comp XE268 cam, built by self in 1992 700R4-2000 stall with lockup, shift kit, Corvette servo 3.07 open diff- I need a 3.73 posi! 2nd owner since 1986 - 388,000 km and counting. 100k by the first owner and the rest by me. Last edited by olblue81; 01-08-2011 at 12:52 PM. |
|
|
|
01-09-2011, 12:11 PM
|
#2 |
|
Has more rust than truck...
Join Date: Apr 2005
Location: Ivanhoe, MN
Posts: 2,421
|
Re: 6L90E yokes
Best solution would be to have a drive shaft made with the slip joint in the shaft and leave the yoke bolted to the tail shaft(strongest)
Another option would be to find a application where the 6l90e comes with a slip yoke, maybe a 4x4 came like this? Good luck |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
