CA 73 Chevy 1/2 ton 2wd parting soon - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KrazyRay · 02-01-2011, 12:49 AM

I just brought in a rough truck that had been sitting in a farm for many years.
I will be parting this truck out the week after the super bowl. Not a lot of parts here and I will be using the back end for a trailer. Please respond in thread to avoid confusion.
Thanks, Ray

5 lug front suspension complete- $150 local

3 speed manual trans- $50 local

clutch/brake pedal assembly- $30 plus shipping

hood- $50 local

driver side vent window- $20 plus shipping

power steering box, pump, brackets- $60 plus shipping

headlight switch- $12 shipped

seat belts (lap belts)- $30 shipped

KrazyRay · 02-01-2011, 12:52 AM

22

manimal · 02-01-2011, 01:40 AM

pm sent. Where is Orangevale in relation to Lodi?

KrazyRay · 02-01-2011, 09:24 AM

I'm about an hour and 15 minutes away from Lodi.

Billy81 · 02-01-2011, 03:40 PM

Is the Bezel any good?

KrazyRay · 02-01-2011, 03:53 PM

Sorry, the bezel is junk. I have a 73 Blazer coming in soon. It might have one.
Thanks, Ray

Billy81 · 02-01-2011, 04:04 PM

Quote:

Originally Posted by KrazyRay

Sorry, the bezel is junk. I have a 73 Blazer coming in soon. It might have one.
Thanks, Ray

If it's non A/C let me know..thanks

KrazyRay · 02-03-2011, 01:57 PM

Sorry, there is no bezel in the Blazer.

KrazyRay · 02-14-2011, 12:50 AM

lap belts $30 shipped...headlight switch $12 shipped...clutch pedal assembly $30 plus shipping.

ECU PIRATE · 02-14-2011, 10:22 AM

How do the radiator support mounts look? I just picked up a 77' K10 short bed frame that needs to have them replaced.

KrazyRay · 02-14-2011, 11:08 AM

I have several sets. Do you need the just the radiator support or the whole thing which includes the front spring hanger?

ECU PIRATE · 02-14-2011, 01:08 PM

Quote:

Originally Posted by KrazyRay

I have several sets. Do you need the just the radiator support or the whole thing which includes the front spring hanger?

Thansk Ray. I won't be picking up the frame for another couple of weeks but, I am sure that both radiator supports need to be replaced. Once I get it home and cleaned up courtsey of the pressure washer, I will let you know.

GCncsuHD · 02-14-2011, 11:56 AM

I need the center and side grille brackets?

KrazyRay · 02-14-2011, 02:40 PM

Quote:

Originally Posted by GCncsuHD

I need the center and side grille brackets?

$37 shipped to NC.
Thanks, Ray

GCncsuHD · 02-14-2011, 02:43 PM

Quote:

Originally Posted by KrazyRay

$37 shipped to NC.
Thanks, Ray

I'll take them, PM sent.

KrazyRay · 02-14-2011, 09:50 PM

Quote:

Originally Posted by GCncsuHD

I'll take them, PM sent.

SOLD! Thanks

yellowGT · 02-15-2011, 01:37 AM

fuel filler necks? are they still available? shipped to 75040

80stepsideguy · 02-17-2011, 04:33 AM

Ray,
i realized i need a single horn for my truck, does this 1 have a single horn? If so can you test it to make sure it works and your as king price and shipping to zip code 32145..

thanks
Pat

KrazyRay · 02-17-2011, 11:16 AM

I will check my other 73 as this front end was in bad shape and already went to the scrap yard.
Thanks, Ray

1LowToy · 02-19-2011, 11:34 AM

Ray,
Would you part with a pair of stock front springs from that front end, or another? I can come to O'vale form Sonora.

KrazyRay · 02-20-2011, 08:20 PM

Sorry, the front suspension sold locally.

KrazyRay · 02-20-2011, 08:21 PM

I'm going to be out of commission for a week (sick) but I will try to answer questions.
Thanks, Ray

bigblock73 · 02-24-2011, 01:33 AM

Ray, does this truck still have the trans crossmember? Is it rusty or damaged? I just need the center section (runs from rail to rail), NOT the supports on each side. Zip is still 55448. A pic would be nice if possible. Hope you are feeling better.

KrazyRay · 02-24-2011, 09:25 PM

trans cross member pics...Is this the right one?

bigblock73 · 02-24-2011, 10:28 PM

That looks like it. I'll take it. 55448.

Thank you for the pictures!

02-01-2011, 12:49 AM	#1
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	73 Chevy 1/2 ton 2wd parting soon I just brought in a rough truck that had been sitting in a farm for many years. I will be parting this truck out the week after the super bowl. Not a lot of parts here and I will be using the back end for a trailer. Please respond in thread to avoid confusion. Thanks, Ray 5 lug front suspension complete- $150 local 3 speed manual trans- $50 local clutch/brake pedal assembly- $30 plus shipping hood- $50 local driver side vent window- $20 plus shipping power steering box, pump, brackets- $60 plus shipping headlight switch- $12 shipped seat belts (lap belts)- $30 shipped Attached Images Last edited by KrazyRay; 02-14-2011 at 12:45 AM.

02-01-2011, 12:52 AM	#2
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: 73 Chevy 1/2 ton 2wd parting soon 22 Attached Images

02-01-2011, 01:40 AM	#3
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: 73 Chevy 1/2 ton 2wd parting soon pm sent. Where is Orangevale in relation to Lodi? __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

02-01-2011, 09:24 AM	#4
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: 73 Chevy 1/2 ton 2wd parting soon I'm about an hour and 15 minutes away from Lodi.

02-01-2011, 03:40 PM	#5
Billy81 Registered User Join Date: Jun 2004 Location: Medford,Oregon Posts: 390	Re: 73 Chevy 1/2 ton 2wd parting soon Is the Bezel any good? __________________

02-01-2011, 03:53 PM	#6
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: 73 Chevy 1/2 ton 2wd parting soon Sorry, the bezel is junk. I have a 73 Blazer coming in soon. It might have one. Thanks, Ray

02-03-2011, 01:57 PM	#8
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: 73 Chevy 1/2 ton 2wd parting soon Sorry, there is no bezel in the Blazer.

02-14-2011, 12:50 AM	#9
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: 73 Chevy 1/2 ton 2wd parting soon lap belts $30 shipped...headlight switch $12 shipped...clutch pedal assembly $30 plus shipping. Attached Images

02-14-2011, 10:22 AM	#10
ECU PIRATE Registered User Join Date: Apr 2009 Location: Centreville, Virginia Posts: 846	Re: 73 Chevy 1/2 ton 2wd parting soon How do the radiator support mounts look? I just picked up a 77' K10 short bed frame that needs to have them replaced. __________________ The Fleet........ 68' Camaro - 1st car (restored & still have it) 09' VW Tiguan (Wife's Daily Driver) 14' VW Passat SE TSI (my personal) 14' Ford Edge Sport (Daily Work Vehicle) 73' SWB Stepside - 77K org. miles 74' LWB 454/TH400 - drive train transplant for my (Sold) 98' SWB C1500 W/T - shop truck (Sold) 90' GMC Sierra SLE short step - aka " Jezabelle " (Sold)

02-14-2011, 11:08 AM	#11
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: 73 Chevy 1/2 ton 2wd parting soon I have several sets. Do you need the just the radiator support or the whole thing which includes the front spring hanger?

02-14-2011, 11:56 AM	#13
GCncsuHD Charlie Daniels w/ a Tq Wrench Join Date: May 2009 Location: Statesville, NC Posts: 1,570	Re: 73 Chevy 1/2 ton 2wd parting soon I need the center and side grille brackets? __________________ ΜΟΛΩΝ ΛΑΒΕ 67 C10 Shortbed "Great Grandpa's Truck" I6 3 on the Tree 71k original miles 5.3 swap in the works 69 K5 Blazer-Family Beach Cruiser Project 78 K30 Dually Semi-Retired Fire Truck 350/SM465 35"s SOLD01 2500HD ECSB 6.0 4x4 5.13's 8" lift 38"s

02-15-2011, 01:37 AM	#17
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: 73 Chevy 1/2 ton 2wd parting soon fuel filler necks? are they still available? shipped to 75040 __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3

02-17-2011, 04:33 AM	#18
80stepsideguy Laid back freak Join Date: Mar 2008 Location: hastings florida Posts: 248	Re: 73 Chevy 1/2 ton 2wd parting soon Ray, i realized i need a single horn for my truck, does this 1 have a single horn? If so can you test it to make sure it works and your as king price and shipping to zip code 32145.. thanks Pat __________________ 1980 chevy c10 step side restomod, 1970 cougar convertible 1 OF 24 ever built: 2014 Hyundai Tucson limited (daily driver).

02-17-2011, 11:16 AM	#19
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: 73 Chevy 1/2 ton 2wd parting soon I will check my other 73 as this front end was in bad shape and already went to the scrap yard. Thanks, Ray

02-19-2011, 11:34 AM	#20
1LowToy Registered User Join Date: Nov 2009 Location: Sonora California Posts: 860	Re: 73 Chevy 1/2 ton 2wd parting soon Ray, Would you part with a pair of stock front springs from that front end, or another? I can come to O'vale form Sonora.



Register or Log In To remove these advertisements.

02-20-2011, 08:20 PM	#21
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: 73 Chevy 1/2 ton 2wd parting soon Sorry, the front suspension sold locally.

02-20-2011, 08:21 PM	#22
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: 73 Chevy 1/2 ton 2wd parting soon I'm going to be out of commission for a week (sick) but I will try to answer questions. Thanks, Ray

02-24-2011, 01:33 AM	#23
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Re: 73 Chevy 1/2 ton 2wd parting soon Ray, does this truck still have the trans crossmember? Is it rusty or damaged? I just need the center section (runs from rail to rail), NOT the supports on each side. Zip is still 55448. A pic would be nice if possible. Hope you are feeling better. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale Last edited by bigblock73; 02-24-2011 at 01:33 AM.

02-24-2011, 09:25 PM	#24
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: 73 Chevy 1/2 ton 2wd parting soon trans cross member pics...Is this the right one? Attached Images

02-24-2011, 10:28 PM	#25
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Re: 73 Chevy 1/2 ton 2wd parting soon That looks like it. I'll take it. 55448. Thank you for the pictures! __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

Register or Log In To remove these advertisements.