IA 1970 Chevy C/20 Parting out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Dieselwrencher** · 02-10-2011, 07:22 PM

I have had this truck for a few months and have decided it is getting parted out. I was going to build a SWB out of it and decided I don't need another big project like that.

Here is a list of things already sold or not available:
Radiator and mounts
Inner and outer grill
Rear hitch
Automatic linkage
Door ventshades

If you see anything not listed just ask about it. Here is a list of parts and prices. Prices are negotiable as well. I can get shipping quotes for you as well. All prices listed are without shipping.

Parchment seat belt retractors $40

Gauge cluster- condition of gauges unknown $30
AM radio- do not know if it works. $25
Camaro steering wheel $30
Automatic steering column $25
Cigarett lighter delete $20
Door panels $25 for the pair
Seat in nice shape except for some tearing in the lower side $40
Glove box door $20
Dash Pad has one crack in the center $10

Fan shroud $25
Heater core housing $20
Power steering pump and brackets $40
Throttle linkage and pedal assy $30
Auto cross member $30

Stainless steel camper mirrors Pretty nice $75

**Dieselwrencher** · 02-10-2011, 07:32 PM

RH and LH doors in pretty good shape. very little rust at bottom pinch weld, has some surface rust where door rubbed on floor mats I'm guessing. $75 each with internals

LH fender no rust I have seen yet $60
Fender emblems C/20 and 8 350 $10/pr

Marker lamps $5 each

Complete antenna looks to be aftermarket of some kind $10

73-75 hub caps in nice shape $40

If you can see anything you need, let me know. The truck is a coil spring truck with 350 locked up, TH350 unknown cond., and an eaton rear end. it also has the front sway bar and factory over load springs. Thanks Ryan.

**too much stuff** · 02-10-2011, 07:51 PM

Are all 4 hubcaps there and in decent shape without splits?
Eric
I guess i should say i will take them if they are decent and not split on the edges...

**Dieselwrencher** · 02-10-2011, 07:57 PM

Quote:

Originally Posted by too much stuff

Are all 4 hubcaps there and in decent shape without splits?
Eric
I guess i should say i will take them if they are decent and not split on the edges...

Eric, I didn't see any splits but will remove them in the morning and make sure there aren't. Ryan.

CaptRMW · 02-10-2011, 07:58 PM

Ryan I am in for the outside door handles pending condition and price. Shipped to 34689 Thanks, Roger

crig39 · 02-10-2011, 08:02 PM

how much for all the pulleys?

**Dieselwrencher** · 02-10-2011, 08:12 PM

Quote:

Originally Posted by crig39

how much for all the pulleys?

Do you want just the water pump pulley and crank pulley? Or do you want the alt pulley, the PS pulley, and the water pump and crank pulleys? Thanks Ryan.

Hottrucks · 02-10-2011, 08:30 PM

tthis may sound dub but I need the door locks and ing tumbler??? also I'm kinda thinking about putting thsat bottom trim on my truck as a paint line..shipping to 03748
thanx
Jeff

**Dieselwrencher** · 02-10-2011, 08:10 PM

Quote:

Originally Posted by CaptRMW

Ryan I am in for the outside door handles pending condition and price. Shipped to 34689 Thanks, Roger

I will get some better pics of the door handles for you Thanks Ryan.

Paul's53chevy · 05-25-2011, 10:54 PM

I'm interested in the rear end, but just the gears. It should have floating axles, the chuck style pumkin housing rear comes out. Please give this a quick read - it'll tell you what I'm talking about, I'm not completely up on my terminology.

http://www.oldgmctrucks.com/page0276.html

Shipping to 68626 on just the middle (not the whole axle, but the whole pumkin) or I might be able to drive over there. Let me know please

c1069 · 02-10-2011, 08:59 PM

interested on seat belts (pics). Thanks

**FL71C10** · 02-10-2011, 09:09 PM

How much for both water pump and crank pulleys, alt brackets, and ps pump and brackets? Shipped to 32803, commercial address?

Thanks!

c1069 · 02-10-2011, 09:06 PM

I will take the steering column pending shipping to 93250. Thanks

sjarrett71 · 02-10-2011, 09:13 PM

Is the fan shroud in good shape? Any cracks or broken tabs? I might be able to have my sis pick it up but just in case how much would shipping be to Rolla, MO 65401?

tow guys · 02-10-2011, 09:17 PM

Interested in both mirrors and the wiper cowl if it has no rot. Need total Shipped to 08721.
Posted via Mobile Device

c1069 · 02-10-2011, 09:21 PM

and how much for the arm rest. Thanks

and pics for sunvisors

**Dieselwrencher** · 02-10-2011, 09:46 PM

Quote:

Originally Posted by c1069

interested on seat belts (pics). Thanks

Quote:

Originally Posted by c1069

I will take the steering column pending shipping to 93250. Thanks

I will take more pics of the seat belts, I'm not sure if they are all there. i will also get you a quote on shipping the column after I measure it.

Quote:

Originally Posted by FL71C10

How much for both water pump and crank pulleys, alt brackets, and ps pump and brackets? Shipped to 32803, commercial address?

Thanks!

One guy already asked about pullies and I need him to respond to see what he wants. If he passes you're next in line.

Quote:

Originally Posted by sjarrett71

Is the fan shroud in good shape? Any cracks or broken tabs? I might be able to have my sis pick it up but just in case how much would shipping be to Rolla, MO 65401?

I will check the shroud again tomorrow. It looked fine, but I didn't examine it long. i will get you a quote as well.

Quote:

Originally Posted by tow guys

Interested in both mirrors and the wiper cowl if it has no rot. Need total Shipped to 08721.
Posted via Mobile Device

I will get you a quote on the wiper cowl, but it may not be cheap. IDK if I have a box big enough for it. I can ship the mirrors seperate and will quote them that way.

Quote:

Originally Posted by c1069

and how much for the arm rest. Thanks

and pics for sunvisors

Do you want both arm rest, or just one? I will have to clean up the visors in the AM as well as the arm rests and get some pics for you.

Guys, I will try to get all of your quotes and pics taken care of tomorrow with any luck. Ryan.

sjarrett71 · 02-10-2011, 09:59 PM

OK, Thanks!

Fesser · 02-11-2011, 10:26 AM

1. Put me in line for the steering column please.
2. Put me in line for all the stuff (locks, tumbler, trim) that Hottrucks asked about.
3. I'll take the steering wheel. Shipping to 94559.
Thanks

projectjimmie68 · 02-11-2011, 11:03 AM

How much for the gauge cluster including shipping to zip 32136? Thanks Projectjimie

**Dieselwrencher** · 02-11-2011, 11:25 PM

Quote:

Originally Posted by Fesser

1. Put me in line for the steering column please.
2. Put me in line for all the stuff (locks, tumbler, trim) that Hottrucks asked about.
3. I'll take the steering wheel. Shipping to 94559.
Thanks

Steering wheel $40 shipped. Thanks Ryan.

Fesser · 02-12-2011, 12:08 PM

Quote:

Originally Posted by Fesser

1. Put me in line for the steering column please.
2. Put me in line for all the stuff (locks, tumbler, trim) that Hottrucks asked about.
3. I'll take the steering wheel. Shipping to 94559.
Thanks

I don't think you meant to but you bumped me out of line for the side trim.
40 shipped on the wheel is great. How do you prefer payment. Frank

**Dieselwrencher** · 02-13-2011, 01:30 PM

Quote:

Originally Posted by Fesser

I don't think you meant to but you bumped me out of line for the side trim.
40 shipped on the wheel is great. How do you prefer payment. Frank

No I didn't mean too. You're still in line and nobody has spoken for them as of yet. Paypal works for me. I'll send you a PM. Thanks Ryan.

alsriv2 · 02-11-2011, 11:32 AM

Interested in the mirrors> Shipping to 21060

Al

'69 GMC 2500 Custom Camper
'69 Chevy C10 396

jce4isu · 02-11-2011, 12:58 PM

I will take the Alt bracket and I think I need shipping lol.
Posted via Mobile Device

Also put me in line for the fan shroud

02-10-2011, 07:22 PM	#1
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,143	1970 Chevy C/20 Parting out I have had this truck for a few months and have decided it is getting parted out. I was going to build a SWB out of it and decided I don't need another big project like that. Here is a list of things already sold or not available: Radiator and mounts Inner and outer grill Rear hitch Automatic linkage Door ventshades If you see anything not listed just ask about it. Here is a list of parts and prices. Prices are negotiable as well. I can get shipping quotes for you as well. All prices listed are without shipping. Parchment seat belt retractors $40 Gauge cluster- condition of gauges unknown $30 AM radio- do not know if it works. $25 Camaro steering wheel $30 Automatic steering column $25 Cigarett lighter delete $20 Door panels $25 for the pair Seat in nice shape except for some tearing in the lower side $40 Glove box door $20 Dash Pad has one crack in the center $10 Fan shroud $25 Heater core housing $20 Power steering pump and brackets $40 Throttle linkage and pedal assy $30 Auto cross member $30 Stainless steel camper mirrors Pretty nice $75 __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.* Last edited by Dieselwrencher; 02-10-2011 at 07:34 PM.

02-10-2011, 07:32 PM	#2
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,143	Re: 1970 Chevy C/20 Parting out RH and LH doors in pretty good shape. very little rust at bottom pinch weld, has some surface rust where door rubbed on floor mats I'm guessing. $75 each with internals LH fender no rust I have seen yet $60 Fender emblems C/20 and 8 350 $10/pr Marker lamps $5 each Complete antenna looks to be aftermarket of some kind $10 73-75 hub caps in nice shape $40 If you can see anything you need, let me know. The truck is a coil spring truck with 350 locked up, TH350 unknown cond., and an eaton rear end. it also has the front sway bar and factory over load springs. Thanks Ryan. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.* Last edited by Dieselwrencher; 02-10-2011 at 07:36 PM.

02-10-2011, 07:51 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,801	Re: 1970 Chevy C/20 Parting out Are all 4 hubcaps there and in decent shape without splits? Eric I guess i should say i will take them if they are decent and not split on the edges... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto Last edited by too much stuff; 02-10-2011 at 07:55 PM.

02-10-2011, 07:58 PM	#5
CaptRMW Custom Sport W/T Join Date: Nov 2010 Location: Tarpon Springs,Fl & Annapolis,Md. ....................Quaint drinking villages with a fishing problem Posts: 898	Re: 1970 Chevy C/20 Parting out Ryan I am in for the outside door handles pending condition and price. Shipped to 34689 Thanks, Roger Last edited by CaptRMW; 02-10-2011 at 08:07 PM. Reason: copied everything by mistake

02-10-2011, 08:02 PM	#6
crig39 Registered User Join Date: Aug 2010 Location: morristown, tn Posts: 53	Re: 1970 Chevy C/20 Parting out how much for all the pulleys?

02-10-2011, 08:30 PM	#8
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: 1970 Chevy C/20 Parting out tthis may sound dub but I need the door locks and ing tumbler??? also I'm kinda thinking about putting thsat bottom trim on my truck as a paint line..shipping to 03748 thanx Jeff __________________ 1970 C10 CST fleetside 472 ....big dreams little cash... http://67-72chevytrucks.com/vboard/s...d.php?t=335721 SunShine Syndicate.. Mikes Sandwich Fair Run OCT 8th 2011 http://www.thesandwichfair.com/html/...auto_show.html

05-25-2011, 10:54 PM	#10
Paul's53chevy Registered User Join Date: Jul 2009 Location: Brainard Nebraska Posts: 9	Re: 1970 Chevy C/20 Parting out I'm interested in the rear end, but just the gears. It should have floating axles, the chuck style pumkin housing rear comes out. Please give this a quick read - it'll tell you what I'm talking about, I'm not completely up on my terminology. http://www.oldgmctrucks.com/page0276.html Shipping to 68626 on just the middle (not the whole axle, but the whole pumkin) or I might be able to drive over there. Let me know please

02-10-2011, 08:59 PM	#11
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: 1970 Chevy C/20 Parting out interested on seat belts (pics). Thanks __________________ Pancho 69 c/10 step side 454/400 with 3.07

02-10-2011, 09:09 PM	#12
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,509	Re: 1970 Chevy C/20 Parting out How much for both water pump and crank pulleys, alt brackets, and ps pump and brackets? Shipped to 32803, commercial address? Thanks! __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

02-10-2011, 09:06 PM	#13
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: 1970 Chevy C/20 Parting out I will take the steering column pending shipping to 93250. Thanks __________________ Pancho 69 c/10 step side 454/400 with 3.07

02-10-2011, 09:13 PM	#14
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Re: 1970 Chevy C/20 Parting out Is the fan shroud in good shape? Any cracks or broken tabs? I might be able to have my sis pick it up but just in case how much would shipping be to Rolla, MO 65401? __________________ -Scott- Last edited by sjarrett71; 02-10-2011 at 09:14 PM.

02-10-2011, 09:17 PM	#15
tow guys Registered User Join Date: Dec 2010 Location: Bayville NJ Posts: 385	Re: 1970 Chevy C/20 Parting out Interested in both mirrors and the wiper cowl if it has no rot. Need total Shipped to 08721. Posted via Mobile Device

02-10-2011, 09:21 PM	#16
c1069 Registered User Join Date: Apr 2010 Location: McFarland CA Posts: 1,392	Re: 1970 Chevy C/20 Parting out and how much for the arm rest. Thanks and pics for sunvisors __________________ Pancho 69 c/10 step side 454/400 with 3.07 Last edited by c1069; 02-10-2011 at 09:28 PM.

02-10-2011, 09:59 PM	#18
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Re: 1970 Chevy C/20 Parting out OK, Thanks! __________________ -Scott-

02-11-2011, 10:26 AM	#19
Fesser Registered User Join Date: Feb 2010 Location: Napa, CA Posts: 519	Re: 1970 Chevy C/20 Parting out 1. Put me in line for the steering column please. 2. Put me in line for all the stuff (locks, tumbler, trim) that Hottrucks asked about. 3. I'll take the steering wheel. Shipping to 94559. Thanks



Register or Log In To remove these advertisements.

02-11-2011, 11:03 AM	#20
projectjimmie68 Registered User Join Date: Oct 2009 Location: Flagler Beach,Fl. Posts: 455	Re: 1970 Chevy C/20 Parting out How much for the gauge cluster including shipping to zip 32136? Thanks Projectjimie

02-11-2011, 11:32 AM	#24
alsriv2 Registered User Join Date: Sep 2010 Location: Formerly MD and San Diego, now loving life in Arizona Posts: 1,636	Re: 1970 Chevy C/20 Parting out Interested in the mirrors> Shipping to 21060 Al '69 GMC 2500 Custom Camper '69 Chevy C10 396

02-11-2011, 12:58 PM	#25
jce4isu Registered User Join Date: Mar 2010 Location: Des Moines, IA Posts: 203	Re: 1970 Chevy C/20 Parting out I will take the Alt bracket and I think I need shipping lol. Posted via Mobile Device Also put me in line for the fan shroud __________________ 1972 build http://67-72chevytrucks.com/vboard/s...d.php?t=391344 Last edited by jce4isu; 02-11-2011 at 01:02 PM.

Register or Log In To remove these advertisements.