What did you all get done 2/13/11 Valentines edition - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**old Rusty C10** · 02-13-2011, 10:53 PM

I didnt get much done at all I will update later you all?

ghettoluxury · 02-13-2011, 11:04 PM

cleaned the garage and hung some square body art up (AKA fender and grille) lol

*87 chevy silverado* · 02-13-2011, 11:04 PM

i got to meet spudz.... great guy...and put on the tbi he let me borrow and the Ecm for the truck..

Toxic Redline · 02-13-2011, 11:12 PM

Waited for Autozone to ship me Brake lines only to have to call them and find out that they NO LONGER STOCK THESE LINES!!! They did send me a $15 gift card for my troubles but it took me to call them and ask wtf for them to tell me i was not getting them!!! ugh two weeks i waited for no reason!1

1LowToy · 02-13-2011, 11:24 PM

Well I got my truck back on all four wheels after going through the front end and lowering it. Sneeked away to get my wife a Valentines card and flowers. After 25 years together we do think alike. We bought each other the same Valentines card!!!! No she did not buy me flowers,,,,, only because she's seen what I did to my clothes after working on the truck.

Great wife to put up with my dirty laundry

spudz · 02-13-2011, 11:11 PM

Went to junk yard with 87 chevy silverado and his dad.. Great people as well. Bought a set of nice dually fenders, center support and grill brackets for 73-74 chevy truck, and a lower valance thats painted same god awefull yellow as my 79 c30. Less then $100bux spend including gas to get there.. had a nice relaxing day.. dually fenders were a pain removing...

rfmaster · 02-13-2011, 11:28 PM

Finally recovered from a bad flu.

First thing Saturday morning replaced master cylinder - old one had a leaky seal. Bleed brakes twice just to make sure that I've purged all air from the system. Finishing the job before XYL woke up - priceless. Having my truck road worthy again is 'most excellent'!!

Today - nothing truck related - just keeping XYL happy!

//RF

wyattglock · 02-13-2011, 11:36 PM

Got the engine and trans pulled from the truck. This week I plan to start tearing it down and replacing the gaskets, cam, timing set, and several other things. I may even get brave and take on the proportioning valve while I am at it.

Mr. 250r · 02-13-2011, 11:41 PM

started bucket seat swap in my suburban back seats are basically 100% bolt in and line up and im very happy

**thinair** · 02-14-2011, 02:46 AM

On tuesday started a cab swap for a buddy of mine..............gonna finish it up this tuesday....

franky69c10 · 02-14-2011, 03:04 AM

Picked up a complete 87 grill for $50 bucks

And sum bumper guards for $10 bucks

Posted via Mobile Device

Prong · 02-14-2011, 04:45 AM

Spent 3 1/2 hours on Saturday washing, polishing, waxing, and then vacuuming away the previous ten days of snowy weather and associated filth off of the daily driver. Even with using a buffer, my arms were ready to fall off.

D13 · 02-14-2011, 07:38 AM

Double sealed 14' of basement wall. Went to cheerleading competition on Saturday. Finally was warm enough to go out in the barn, reassembled the monojet for the 77, started work on the waste motor oil processor for using WMO in my diesel, started sorting out the cast and aluminum from everything else for my next scrap run. Pulled the glows on my 'new' 82 diesel engine, dumped out all the fluids, next is a tear down and inspect.

blackbeaSSt · 02-14-2011, 08:32 AM

still gettin the truck craigslist worthy.

P.S. sorry it didn't work out bob.

Tx Firefighter · 02-14-2011, 09:22 AM

Lots of body work and ordered all new side trim as well as all my paint supplies.

jchav62 · 02-14-2011, 10:53 AM

Put on the new 'top banana' grille emblem.

jitteryguy · 02-14-2011, 11:38 AM

saturday and sunday , dug trench's most of the day try'n to keep the camp from float'n away ! did some creative dig'n and 90% of the water flow'd out in a couple hour's. the heater died in the shop but we'd been outside so it did'nt matter till today. replaced the Wilms heater today then "road test'd" Kawasaki T-rex's the rest of the day, will be at the wash rack all day tomarrow !

GCncsuHD · 02-14-2011, 11:51 AM

Quote:

Originally Posted by jchav62

Put on the new 'top banana' grille emblem.

<----Jealous, Needs grille brackets so I can put my 74 grille on and post up a similar picture.

2/13 was a Sunday, so I did nothing but stuff my face at Grandma's after church and take a nap

On Saturday though...Did nothing to the 78 or the 67. Put new shocks on the 01, and a coil and new battery on the DD 98 S10. Went to dinner at a fancy restaurant in the 01 with the wife, all dressed up, on the way home pulled a SUV out of a culvert. Teenage girl had missed the entrance to a neighborhood pulling in and went down in the culvert, both back tires were hanging 2ft in the air. After checking on them, I threw a strap around the rear subframe and pulled them right out. Surprisingly no damage other than some scuffs on the rockers and a cracked front bumper.

spudz · 02-14-2011, 12:33 PM

Quote:

Originally Posted by GCncsuHD

<----Jealous, Needs grille brackets so I can put my 74 grille on and post up a similar picture.
.

Pm krazykay he has the grille brackets you need for sale

GCncsuHD · 02-14-2011, 12:39 PM

Quote:

Originally Posted by spudz

Pm krazykay he has the grille brackets you need for sale

KrazyRay? I posted in one of his part out threads earlier this morning, haven't heard back just yet. He didn't have any specifically listed that I saw, but he has several 73-74 trucks he is parting.

qu1cks1lver56 · 02-14-2011, 11:30 AM

Washed the truck and realized how bad of shape my wheels are in. Polished aluminum is hard to clean.

baclay9 · 02-14-2011, 12:11 PM

Got my block and rotating assembly back from the machine shop. Everything is all clean and balanced. Now I just have to put it together.

red rumbler · 02-14-2011, 01:04 PM

still counting down until my trucks outa storage

manimal · 02-14-2011, 03:19 PM

Pulled engine out of the '77 and tore it down to find the crank had been turned .020/.020 and the bore is STD.

engineco713 · 02-14-2011, 03:40 PM

Pumped up the tires at my father-in-law's house where it was being stored, took it for a ride, then took it to the new house and tucked it into its nice new garage. Hope to be able to start working on it a little more now once I get my tools moved.

02-13-2011, 10:53 PM	#1
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	What did you all get done 2/13/11 Valentines edition I didnt get much done at all I will update later you all? __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

02-13-2011, 11:04 PM	#2
ghettoluxury Registered User Join Date: Apr 2009 Location: Waynesfield Ohio Posts: 1,991	Re: What did you all get done 2/13/11 Valentines edition cleaned the garage and hung some square body art up (AKA fender and grille) lol __________________ 1949 Five Window, 1973 Step Side, 2000 Z71

02-13-2011, 11:04 PM	#3
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: What did you all get done 2/13/11 Valentines edition i got to meet spudz.... great guy...and put on the tbi he let me borrow and the Ecm for the truck..

02-13-2011, 11:12 PM	#4
Toxic Redline Registered User Join Date: May 2010 Location: Ogden, Utah Posts: 219	Re: What did you all get done 2/13/11 Valentines edition Waited for Autozone to ship me Brake lines only to have to call them and find out that they NO LONGER STOCK THESE LINES!!! They did send me a $15 gift card for my troubles but it took me to call them and ask wtf for them to tell me i was not getting them!!! ugh two weeks i waited for no reason!1 __________________ 84 K20 Long Box W.I.P 78 Burb - parts now [Rolled] 68 c20 dump bed WHEN IN DOUBT--- FLOOR IT

02-13-2011, 11:24 PM	#5
1LowToy Registered User Join Date: Nov 2009 Location: Sonora California Posts: 860	Re: What did you all get done 2/13/11 Valentines edition Well I got my truck back on all four wheels after going through the front end and lowering it. Sneeked away to get my wife a Valentines card and flowers. After 25 years together we do think alike. We bought each other the same Valentines card!!!! No she did not buy me flowers,,,,, only because she's seen what I did to my clothes after working on the truck. Great wife to put up with my dirty laundry

02-13-2011, 11:11 PM	#6
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: What did you all get done 2/13/11 Valentines edition Went to junk yard with 87 chevy silverado and his dad.. Great people as well. Bought a set of nice dually fenders, center support and grill brackets for 73-74 chevy truck, and a lower valance thats painted same god awefull yellow as my 79 c30. Less then $100bux spend including gas to get there.. had a nice relaxing day.. dually fenders were a pain removing... __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

02-13-2011, 11:28 PM	#7
rfmaster Registered User Join Date: Oct 2003 Location: OC CA Posts: 1,374	Re: What did you all get done 2/13/11 Valentines edition Finally recovered from a bad flu. First thing Saturday morning replaced master cylinder - old one had a leaky seal. Bleed brakes twice just to make sure that I've purged all air from the system. Finishing the job before XYL woke up - priceless. Having my truck road worthy again is 'most excellent'!! Today - nothing truck related - just keeping XYL happy! //RF __________________ "The Beast" 1975 Chevrolet C20 longbed 350/700R4! with 3inch body lift Dual Flowmasters Super 40's! TBI retrofit completed (2007-07-29) New 383CID (+030) 08-304-8 9.5:1CR x36,005 (2012-12-17)

02-13-2011, 11:36 PM	#8
wyattglock Registered User Join Date: Jul 2010 Location: Lafayette, IN Posts: 622	Re: What did you all get done 2/13/11 Valentines edition Got the engine and trans pulled from the truck. This week I plan to start tearing it down and replacing the gaskets, cam, timing set, and several other things. I may even get brave and take on the proportioning valve while I am at it.

02-13-2011, 11:41 PM	#9
Mr. 250r Registered User Join Date: Dec 2010 Location: freeburg, illinois Posts: 885	Re: What did you all get done 2/13/11 Valentines edition started bucket seat swap in my suburban back seats are basically 100% bolt in and line up and im very happy

02-14-2011, 02:46 AM	#10
thinair thinair Join Date: Jun 2004 Location: omaha,ne Posts: 1,009	Re: What did you all get done 2/13/11 Valentines edition On tuesday started a cab swap for a buddy of mine..............gonna finish it up this tuesday.... Last edited by thinair; 02-14-2011 at 02:52 AM.

02-14-2011, 03:04 AM	#11
franky69c10 chevy runs deep Join Date: Mar 2006 Location: PHOENIX AZ Posts: 1,074	Re: What did you all get done 2/13/11 Valentines edition Picked up a complete 87 grill for $50 bucks And sum bumper guards for $10 bucks Posted via Mobile Device __________________ RAIDER NATION 1969 c10 swb soon 2 b on the road... My LWB is a SWB now http://67-72chevytrucks.com/vboard/s...d.php?t=498241

02-14-2011, 04:45 AM	#12
Prong Registered User Join Date: May 2007 Location: CO Posts: 475	Re: What did you all get done 2/13/11 Valentines edition Spent 3 1/2 hours on Saturday washing, polishing, waxing, and then vacuuming away the previous ten days of snowy weather and associated filth off of the daily driver. Even with using a buffer, my arms were ready to fall off.

02-14-2011, 07:38 AM	#13
D13 Registered User Join Date: Feb 2007 Location: Memphis MI Posts: 1,851	Re: What did you all get done 2/13/11 Valentines edition Double sealed 14' of basement wall. Went to cheerleading competition on Saturday. Finally was warm enough to go out in the barn, reassembled the monojet for the 77, started work on the waste motor oil processor for using WMO in my diesel, started sorting out the cast and aluminum from everything else for my next scrap run. Pulled the glows on my 'new' 82 diesel engine, dumped out all the fluids, next is a tear down and inspect. __________________ 1987 2 ton 1982 250/TH350 beater in progress Dad's 1981 3/4 L6 3 on tree posi and no options, awaiting restoration or scrapping Plus a mess o' tractors

02-14-2011, 08:32 AM	#14
blackbeaSSt Registered User Join Date: Sep 2010 Location: Anderson, SC Posts: 325	Re: What did you all get done 2/13/11 Valentines edition still gettin the truck craigslist worthy. P.S. sorry it didn't work out bob.

02-14-2011, 09:22 AM	#15
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: What did you all get done 2/13/11 Valentines edition Lots of body work and ordered all new side trim as well as all my paint supplies. __________________ I'm on the Instagram- @Gearhead_Kevin



Register or Log In To remove these advertisements.

02-14-2011, 10:53 AM	#16
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: What did you all get done 2/13/11 Valentines edition Put on the new 'top banana' grille emblem. Attached Images __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

02-14-2011, 11:38 AM	#17
jitteryguy GoatLube Experss Join Date: Oct 2009 Location: clarksville, Tn. Posts: 1,337	Re: What did you all get done 2/13/11 Valentines edition saturday and sunday , dug trench's most of the day try'n to keep the camp from float'n away ! did some creative dig'n and 90% of the water flow'd out in a couple hour's. the heater died in the shop but we'd been outside so it did'nt matter till today. replaced the Wilms heater today then "road test'd" Kawasaki T-rex's the rest of the day, will be at the wash rack all day tomarrow ! __________________ *Goat Lube Express*, locations in Qalat,Afghanistan & Clarksville, Tn. '87 R30 dually 454/TH400 '85 1/2 ton CCSB '92 S10 350/350 '84 MonteCarlo 383/PG/9"ford '78 Malibu wagon 350/350 '78 Cutlass (project family car) '96 S10 Jimmy (Moma's)

02-14-2011, 11:30 AM	#21
qu1cks1lver56 Registered User Join Date: Dec 2009 Location: Milton, FL Posts: 733	Re: What did you all get done 2/13/11 Valentines edition Washed the truck and realized how bad of shape my wheels are in. Polished aluminum is hard to clean. __________________ My 86 http://67-72chevytrucks.com/vboard/s...d.php?t=375526

02-14-2011, 12:11 PM	#22
baclay9 Registered User Join Date: Apr 2010 Location: Newcastle, OK Posts: 1,344	Re: What did you all get done 2/13/11 Valentines edition Got my block and rotating assembly back from the machine shop. Everything is all clean and balanced. Now I just have to put it together.

02-14-2011, 01:04 PM	#23
red rumbler Registered User Join Date: Oct 2009 Location: stouffville ontario Posts: 166	Re: What did you all get done 2/13/11 Valentines edition still counting down until my trucks outa storage

02-14-2011, 03:19 PM	#24
manimal Registered User Join Date: Oct 2006 Location: Southern Kalifornia Posts: 3,066	Re: What did you all get done 2/13/11 Valentines edition Pulled engine out of the '77 and tore it down to find the crank had been turned .020/.020 and the bore is STD. __________________ ------------------------------------------------------ -Lance 2000 Chevy C2500, 5.7, 4L80e 1999 Suburban K2500, 7.4, 4L80e 1980 Camaro..son's car...PROJECT

02-14-2011, 03:40 PM	#25
engineco713 Registered User Join Date: Jul 2010 Location: Port Deposit, Md Posts: 97	Re: What did you all get done 2/13/11 Valentines edition Pumped up the tires at my father-in-law's house where it was being stored, took it for a ride, then took it to the new house and tucked it into its nice new garage. Hope to be able to start working on it a little more now once I get my tools moved. __________________ 1993 Chevy Suburban 4X4 (Off duty driver) 2012 Chevy Impala SSV (Work Vehicle) 2008 Harley Road King (Play toy)

Register or Log In To remove these advertisements.