Lug nuts? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

emil77 · 02-15-2011, 01:01 AM

Hi,

'72 C20, my lug nuts are 7/16" or 9/16"? Any tips on best place to purchase 32 of them from?

**Classic Bowties** · 02-15-2011, 01:22 AM

Quote:

Originally Posted by emil77

Hi,

'72 C20, my lug nuts are 7/16" or 9/16"? Any tips on best place to purchase 32 of them from?

72 C/20 = 9/16" and the best price I recently found was through my napa account. Mel

ETsC10 · 02-15-2011, 02:07 AM

Quote:

Originally Posted by emil77

Hi,

'72 C20, my lug nuts are 7/16" or 9/16"? Any tips on best place to purchase 32 of them from?

I buy my lug nuts through a big-rig supply house...they sell them bulk.

Bring a sample of your lug nut as there's a ton of different styles for different wheels.

emil77 · 02-15-2011, 09:45 AM

Quote:

Originally Posted by ETsC10

I buy my lug nuts through a big-rig supply house...they sell them bulk.

Bring a sample of your lug nut as there's a ton of different styles for different wheels.

Thanks for the help. Where do I find a big rig supply house near Los Angeles, CA?

Also, one of my lug nuts is longer than all the other ones. I don't have the truck or else I would take a picture. All the other lug's are the "normal" ones, then one the drivers side rear wheel is one lug that sticks out a few inches. Is this just an extended lug nut?

flashed · 02-15-2011, 10:44 AM

Lugnutking is an California ,I bought mine from them .Good folks to deal with.

Spoof · 02-15-2011, 11:27 AM

There are some other specs as well, IIRC our lug nuts are 60 degree conical seats, but maybe not for 3/4 ton

Stricklinator · 02-15-2011, 08:16 PM

Quote:

Originally Posted by emil77

Hi,

'72 C20, my lug nuts are 7/16" or 9/16"? Any tips on best place to purchase 32 of them from?

I bought a set of 32 for my C20 on EBay for less than $30 shipped.
Posted via Mobile Device

emil77 · 02-15-2011, 10:16 PM

Quote:

Originally Posted by Stricklinator

I bought a set of 32 for my C20 on EBay for less than $30 shipped.
Posted via Mobile Device

Thanks for the info everybody.

I purchased these: http://cgi.ebay.com/ebaymotors/32-LU...item20b6d4e8e9

**FL71C10** · 02-15-2011, 10:28 PM

So 1/2 ton lug nuts are 7/16"? Also 60 degree conical? I've got rally wheels, still the same?

**Hart_Rod** · 02-15-2011, 10:36 PM

Quote:

Originally Posted by FL71C10

So 1/2 ton lug nuts are 7/16"? Also 60 degree conical? I've got rally wheels, still the same?

71/72 are usually 1/2".

02-15-2011, 01:01 AM	#1
emil77 Registered User Join Date: Oct 2010 Location: Tujunga, CA Posts: 262	Lug nuts? Hi, '72 C20, my lug nuts are 7/16" or 9/16"? Any tips on best place to purchase 32 of them from? __________________ Thanks, Emil 1972 Chevy C20

02-15-2011, 10:44 AM	#5
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: Lug nuts? Lugnutking is an California ,I bought mine from them .Good folks to deal with.

02-15-2011, 11:27 AM	#6
Spoof Registered User Join Date: Jul 2000 Location: Victoria,BC, Canada Posts: 1,300	Re: Lug nuts? There are some other specs as well, IIRC our lug nuts are 60 degree conical seats, but maybe not for 3/4 ton __________________ 71 GMC 1500 LWB Last edited by Spoof; 02-15-2011 at 11:30 AM.

02-15-2011, 10:28 PM	#9
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,512	Re: Lug nuts? So 1/2 ton lug nuts are 7/16"? Also 60 degree conical? I've got rally wheels, still the same? __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.