NY Selling off Blazer parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JimmyFloyd · 02-23-2011, 02:59 PM

******** CONSIDER THIS STUFF ALL SOLD. MOST OF IT IS. ANYTHING LEFT WILL BE POSTED AT A LATER DATE IN A NEW THREAD>*******

Ok, trying to drum up some capitol to pay down some debt, so I've decided to start selling off my blazer parts stash.

Windshield Top Brackets - $45 shipped per pair

Rear Hatch Latch Brackets - $55 shipped for the pair

Blazer door striker pieces - $35 shipped for the 3 pieces

Ash trays $20 shipped each

Arm Rest. Green $20 shipped

Single Wall Top Lights and wiring. No Cab Harness, just the top wires - $30 shipped.

NEW 31 gallon tank. Never had gas in it. Great shape. Not sure if NOS or Aftermarket. Great upgrade and can ship since it didn't have gas, although buyer pays all shipping costs. $150 plus shipping.

Radiator to fender triangles in good shape. $24 shipped for the pair

Rear bed splash shields. Removed from a Longbed pickup. Good shape.

Nice shape Take off Rocker Box Set. These parts were removed from a 1972 2wd blazer in California and then shipped to me last year. They are in very nice shape, very solid, and very hard to come by in take off form. This includes the Rocker Boxes, end caps and filler pieces for both sides. $450 picked up. Will consider shipping Greyhound only, but buyer pays all shipping and boxing costs.

Rocker (Torsion) boxes:

Rocker (Torsion) box end caps (bad picture, no rot, both there, just surface rust like the top half shows):

Rear end cap filler panel.

Fuel filler cover that came with my blazer. Has some minor rust issues at the bottom, but solid otherwise. See pictures of actual item. I believe only the lip rusted off, it's solid from that point on. $45 shipped US.

(Yes, that is a piece of wood attached to it)

Exhaust heat shield from driver's side of a 71 2wd pickup. $25 shipped

Blazer rear hatch windows. have two with old gaskets $50 each plus shipping. Shipping will be tough. Pickup preferred. Buyer pays for shipping and handling.

Hood Latches. Good shape. Not sure on the years. $25 shipped each.

Pulleys. Not sure what they are for. $25 each shipped/bo

1978 Blazer Enblems - $45 shipped

Radiator Support brackets. $25 per pair for the smaller, $35 for the larger.
http://s282.photobucket.com/albums/k...t=100_5839.jpg

I am open to offers on some of the stuff. Pickup preferred on the larger items. Everything is in 13790

tubbedII · 02-23-2011, 06:09 PM

How much for the rocker end caps shipped to 95822?

JimmyFloyd · 02-23-2011, 07:35 PM

I'll consider an offer on them PMed to me. At the moment, I'd rather not split up the package, but I might change my mind.

tubbedII · 02-23-2011, 08:04 PM

Quote:

Originally Posted by JimmyFloyd

I'll consider an offer on them PMed to me. At the moment, I'd rather not split up the package, but I might change my mind.

Sorry...didn't read the part that they were a package deal, and didn't see the price. Thanks though.

JimmyFloyd · 02-23-2011, 08:17 PM

All prices are negotiable. Shoot me a price at what they are worth to you, and if it works for me, we can make a deal.

Also remembered I have a NEW aftermarket (I believe) front and rear chrome bumper for a 70 blazer if someone is interested in those. The rear is a sport bumper I believe $275 for those. Prefer pickup, but may consider shipping greyhound.

I have a decent driver front chrome bumper off a 70 suburban. I believe there is a dent behind the license plate on it. I think the brackets are even still on it from the 70 GMC suburban. $70 picked up for that with brackets.

Also have a MINT CST Blazer passenger side bucket seat with track and hold down bracket. It is black with the scroll pattern seat cover I believe. Not sure if it was recovered or not, but it looks nice with no tears, just dusty. $225 for that picked up. Not sure on shipping.

I have a set of Red on white bucket seats and rear seat, no brackets, that could be used for a driver, but probably need to be recovered. I know there are some rips in the backs, and maybe one or two in the seat area. $125 picked up for those.

Again, I am open to offers. PM me an offer if you don't want to make it here. The truck will be for sale soon as well.

**72gmguy** · 02-23-2011, 10:40 PM

Interested in the bucket seats, single and the set. Do you have pictures? If you want to email them you can send to agapup@aol.com. Thanks

rsavage · 02-23-2011, 11:15 PM

JimmyFloyd,
Interested in the rear sport bumper brackets you bought off the board a couple of months ago. If you are selling, how much shipped to 14004?

Gibber1967 · 02-24-2011, 11:29 AM

I may be interested in these if they are what I'm looking for. Could you send me a pic?

Rear Hatch Latch Brackets - $55 shipped for the pair

Thanks,

Gibber

JimmyFloyd · 02-24-2011, 11:40 AM

72GMGUY - I'll get pictures this evening of them. Have to dig them out.

rsavage - need to see on those. i don't remember what happened to them.

They are in the upper right of the picture

**Gary 70 Jimmy** · 02-24-2011, 12:28 PM

Do you have the radio speaker and cover that hangs under the dash.

JimmyFloyd · 02-24-2011, 12:47 PM

I have 2 or three speakers, but mine wasn't hanging under the dash. Mine was actually mounted up under the dash and faced down. Will have to make sure I still have the brackets and get pictures.

JimmyFloyd · 02-24-2011, 04:24 PM

Here's one of the truck speakers (I think) I have

Will get pictures of the others.

Also found a set of rear interior side panel standoffs. $45 shipped.

And a set of 04 GTO Speaker pods that I was going to use in my door or kickpanels, but now most likely will not. Still would require a hole cut, but they angle the speakers nicely. Speakers included, but untested. - $45

Pogo Stick. Remember your youth. $35+ ride

JimmyFloyd · 02-24-2011, 05:40 PM

Also have a used 4" lift. Front Spring, Rear Blocks, off a 71 Blazer. Comes with Shocks and u-bolts as well, although some nuts might be missing. No pictures yet. $150. Potential shipping via greyhound.

woodchk502 · 02-24-2011, 07:22 PM

What are the chances of a safe shipment of the rear glass to 49120.

Ive never shipped glass but it has to be possible right??

cleszkie · 02-24-2011, 09:50 PM

Jimmy -

I'm interested in the torsion box package. I see you listed it for $400 in the truck section. Would you consider $350 + shipping? I know shipping will be a big chunk, so I'm trying to see If I can make this deal worth the money and effort. Thanks. Craig

JimmyFloyd · 02-25-2011, 11:17 AM

I can see about shipping the glass. I found this link on it. Materials would be part of the shipping cost, but that shouldn't be too bad.

http://www.glasscampus.com/tutorials...ng%20Glass.pdf

As for the rocker boxes, $400 is the lowest I can do at the moment. A rough estimate of cost via greyhound was $110, but I would need to find a box and get the weight for an exact one. There is $15 difference between 80lbs and 100lbs (above quote) when getting the quote.

I've got a bunch of PMs to reply to as well, so I will respond and offer things to people as they sent me message.

woodchk502 · 02-27-2011, 01:22 PM

Quote:

Originally Posted by JimmyFloyd

I can see about shipping the glass. I found this link on it. Materials would be part of the shipping cost, but that shouldn't be too bad.

http://www.glasscampus.com/tutorials...ng%20Glass.pdf

.

Will wait to hear from you then thanks.
jim

best view · 02-27-2011, 06:59 PM

looking for both exhaust manafolds for 72 4x4 blazer

Fesser · 02-25-2011, 11:29 AM

What diameter speakers go in the gto pods? Is that price including shipping?

JimmyFloyd · 02-25-2011, 11:40 AM

I'll measure them tonight. The price wasn't shipped, but I can do $50 shipped on them, which basically splits the cost.

cleszkie · 02-25-2011, 03:26 PM

Jimmy -

Thanks for the quick reply on the torsion boxes. I will commit to the $400 asking price. Please let me know what the total cost for shipping will be to Santa Ana, CA 92707 via Greyhound. For your security, I can send a deposit so you are sure that I won't back out after you go through the trouble of packing and getting shiping cost. Let me know. Thanks. Craig.

JimmyFloyd · 02-26-2011, 10:35 AM

Fesser - from edge of the metal ring to edge of the metal ring is about 6 1/4", maybe a hair less. The longest length is 9" from screw ring to rounded point, and the recess about 2" in depth. I also made sure to get the wire pigtails for them too, so they can be removable.

clesczki - I PMed you about them. You are first in line, and i'll consider them sold with a deposit. As stated, shipping should be around or under $110, but I will try and get them boxed up this weekend and get an accurate amount for you.

Will have more parts to list later tonight

JimmyFloyd · 02-26-2011, 12:40 PM

72GMGUY - Sent you some pictures

rsavage - these are the bumper brackets I have right now:

rsavage · 02-26-2011, 11:31 PM

Okay. Thanks for checking. Don't see a set of rear inners for 69-71.

**72gmguy** · 02-27-2011, 07:57 AM

Tough to see the red seats. What are they out of and do they have seat tracks on them? Thanks.

02-23-2011, 02:59 PM	#1
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Selling off Blazer parts ****** CONSIDER THIS STUFF ALL SOLD. MOST OF IT IS. ANYTHING LEFT WILL BE POSTED AT A LATER DATE IN A NEW THREAD>***** Ok, trying to drum up some capitol to pay down some debt, so I've decided to start selling off my blazer parts stash. Windshield Top Brackets - $45 shipped per pair Rear Hatch Latch Brackets - $55 shipped for the pair Blazer door striker pieces - $35 shipped for the 3 pieces Ash trays $20 shipped each Arm Rest. Green $20 shipped Single Wall Top Lights and wiring. No Cab Harness, just the top wires - $30 shipped. NEW 31 gallon tank. Never had gas in it. Great shape. Not sure if NOS or Aftermarket. Great upgrade and can ship since it didn't have gas, although buyer pays all shipping costs. $150 plus shipping. Radiator to fender triangles in good shape. $24 shipped for the pair Rear bed splash shields. Removed from a Longbed pickup. Good shape. Nice shape Take off Rocker Box Set. These parts were removed from a 1972 2wd blazer in California and then shipped to me last year. They are in very nice shape, very solid, and very hard to come by in take off form. This includes the Rocker Boxes, end caps and filler pieces for both sides. $450 picked up. Will consider shipping Greyhound only, but buyer pays all shipping and boxing costs. Rocker (Torsion) boxes: Rocker (Torsion) box end caps (bad picture, no rot, both there, just surface rust like the top half shows): Rear end cap filler panel. Fuel filler cover that came with my blazer. Has some minor rust issues at the bottom, but solid otherwise. See pictures of actual item. I believe only the lip rusted off, it's solid from that point on. $45 shipped US. (Yes, that is a piece of wood attached to it) Exhaust heat shield from driver's side of a 71 2wd pickup. $25 shipped Blazer rear hatch windows. have two with old gaskets $50 each plus shipping. Shipping will be tough. Pickup preferred. Buyer pays for shipping and handling. Hood Latches. Good shape. Not sure on the years. $25 shipped each. Pulleys. Not sure what they are for. $25 each shipped/bo 1978 Blazer Enblems - $45 shipped Radiator Support brackets. $25 per pair for the smaller, $35 for the larger. http://s282.photobucket.com/albums/k...t=100_5839.jpg I am open to offers on some of the stuff. Pickup preferred on the larger items. Everything is in 13790 __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3 Last edited by JimmyFloyd; 10-23-2013 at 12:26 PM.

02-23-2011, 06:09 PM	#2
tubbedII needs more $$$ Join Date: Mar 2004 Location: Sacramento Posts: 1,936	Re: Selling off Blazer parts How much for the rocker end caps shipped to 95822? __________________ 1970 2wd Blazer

02-23-2011, 07:35 PM	#3
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: Selling off Blazer parts I'll consider an offer on them PMed to me. At the moment, I'd rather not split up the package, but I might change my mind. __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3

02-23-2011, 08:17 PM	#5
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: Selling off Blazer parts All prices are negotiable. Shoot me a price at what they are worth to you, and if it works for me, we can make a deal. Also remembered I have a NEW aftermarket (I believe) front and rear chrome bumper for a 70 blazer if someone is interested in those. The rear is a sport bumper I believe $275 for those. Prefer pickup, but may consider shipping greyhound. I have a decent driver front chrome bumper off a 70 suburban. I believe there is a dent behind the license plate on it. I think the brackets are even still on it from the 70 GMC suburban. $70 picked up for that with brackets. Also have a MINT CST Blazer passenger side bucket seat with track and hold down bracket. It is black with the scroll pattern seat cover I believe. Not sure if it was recovered or not, but it looks nice with no tears, just dusty. $225 for that picked up. Not sure on shipping. I have a set of Red on white bucket seats and rear seat, no brackets, that could be used for a driver, but probably need to be recovered. I know there are some rips in the backs, and maybe one or two in the seat area. $125 picked up for those. Again, I am open to offers. PM me an offer if you don't want to make it here. The truck will be for sale soon as well. __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3

02-23-2011, 10:40 PM	#6
72gmguy Senior Member Join Date: Mar 2009 Location: Brigantine NJ Posts: 822	Re: Selling off Blazer parts Interested in the bucket seats, single and the set. Do you have pictures? If you want to email them you can send to agapup@aol.com. Thanks

02-23-2011, 11:15 PM	#7
rsavage Registered User Join Date: Aug 2009 Location: Alden NY Posts: 2,705	Re: Selling off Blazer parts JimmyFloyd, Interested in the rear sport bumper brackets you bought off the board a couple of months ago. If you are selling, how much shipped to 14004? __________________ 1961 C1 Corvette 1959 El Camino 350 TPI, 9" 4 w disc 69 Blazer K5 - sold July '20 2021 Durango RT 5.7

02-24-2011, 11:29 AM	#8
Gibber1967 Registered User Join Date: Nov 2009 Location: Shuswap, BC Posts: 152	Re: Selling off Blazer parts I may be interested in these if they are what I'm looking for. Could you send me a pic? Rear Hatch Latch Brackets - $55 shipped for the pair Thanks, Gibber

02-24-2011, 11:40 AM	#9
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: Selling off Blazer parts 72GMGUY - I'll get pictures this evening of them. Have to dig them out. rsavage - need to see on those. i don't remember what happened to them. They are in the upper right of the picture __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3 Last edited by JimmyFloyd; 02-24-2011 at 11:45 AM.

02-24-2011, 12:28 PM	#10
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Re: Selling off Blazer parts Do you have the radio speaker and cover that hangs under the dash. __________________ 1972 GMC Jimmy 1/2 4X4 4wheel camper 1970 GMC Jimmy 1/2 4X4 350 1969 Chevy Blazer 1/2 4X4 307 1967 chevy LWB 3/4 396

02-24-2011, 12:47 PM	#11
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: Selling off Blazer parts I have 2 or three speakers, but mine wasn't hanging under the dash. Mine was actually mounted up under the dash and faced down. Will have to make sure I still have the brackets and get pictures. __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3

02-24-2011, 04:24 PM	#12
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: Selling off Blazer parts Here's one of the truck speakers (I think) I have Will get pictures of the others. Also found a set of rear interior side panel standoffs. $45 shipped. And a set of 04 GTO Speaker pods that I was going to use in my door or kickpanels, but now most likely will not. Still would require a hole cut, but they angle the speakers nicely. Speakers included, but untested. - $45 Pogo Stick. Remember your youth. $35+ ride __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3

02-24-2011, 05:40 PM	#13
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: Selling off Blazer parts Also have a used 4" lift. Front Spring, Rear Blocks, off a 71 Blazer. Comes with Shocks and u-bolts as well, although some nuts might be missing. No pictures yet. $150. Potential shipping via greyhound. __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3

02-24-2011, 07:22 PM	#14
woodchk502 Registered User Join Date: Jul 2008 Location: Niles Michigan Posts: 23	Re: Selling off Blazer parts What are the chances of a safe shipment of the rear glass to 49120. Ive never shipped glass but it has to be possible right??

02-24-2011, 09:50 PM	#15
cleszkie Registered User Join Date: Feb 2003 Location: Santa Ana, CA Posts: 2,191	Re: Selling off Blazer parts Jimmy - I'm interested in the torsion box package. I see you listed it for $400 in the truck section. Would you consider $350 + shipping? I know shipping will be a big chunk, so I'm trying to see If I can make this deal worth the money and effort. Thanks. Craig Last edited by cleszkie; 02-24-2011 at 09:52 PM.

02-25-2011, 11:17 AM	#16
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: Selling off Blazer parts I can see about shipping the glass. I found this link on it. Materials would be part of the shipping cost, but that shouldn't be too bad. http://www.glasscampus.com/tutorials...ng%20Glass.pdf As for the rocker boxes, $400 is the lowest I can do at the moment. A rough estimate of cost via greyhound was $110, but I would need to find a box and get the weight for an exact one. There is $15 difference between 80lbs and 100lbs (above quote) when getting the quote. I've got a bunch of PMs to reply to as well, so I will respond and offer things to people as they sent me message. __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3



Register or Log In To remove these advertisements.

02-27-2011, 06:59 PM	#18
best view Registered User Join Date: Apr 2009 Location: newbury new hampsire Posts: 2,158	Re: Selling off Blazer parts looking for both exhaust manafolds for 72 4x4 blazer

02-25-2011, 11:29 AM	#19
Fesser Registered User Join Date: Feb 2010 Location: Napa, CA Posts: 519	Re: Selling off Blazer parts What diameter speakers go in the gto pods? Is that price including shipping?

02-25-2011, 11:40 AM	#20
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: Selling off Blazer parts I'll measure them tonight. The price wasn't shipped, but I can do $50 shipped on them, which basically splits the cost. __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3

02-25-2011, 03:26 PM	#21
cleszkie Registered User Join Date: Feb 2003 Location: Santa Ana, CA Posts: 2,191	Re: Selling off Blazer parts Jimmy - Thanks for the quick reply on the torsion boxes. I will commit to the $400 asking price. Please let me know what the total cost for shipping will be to Santa Ana, CA 92707 via Greyhound. For your security, I can send a deposit so you are sure that I won't back out after you go through the trouble of packing and getting shiping cost. Let me know. Thanks. Craig.

02-26-2011, 10:35 AM	#22
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: Selling off Blazer parts Fesser - from edge of the metal ring to edge of the metal ring is about 6 1/4", maybe a hair less. The longest length is 9" from screw ring to rounded point, and the recess about 2" in depth. I also made sure to get the wire pigtails for them too, so they can be removable. clesczki - I PMed you about them. You are first in line, and i'll consider them sold with a deposit. As stated, shipping should be around or under $110, but I will try and get them boxed up this weekend and get an accurate amount for you. Will have more parts to list later tonight __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3

02-26-2011, 12:40 PM	#23
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: Selling off Blazer parts 72GMGUY - Sent you some pictures rsavage - these are the bumper brackets I have right now: __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3

02-26-2011, 11:31 PM	#24
rsavage Registered User Join Date: Aug 2009 Location: Alden NY Posts: 2,705	Re: Selling off Blazer parts Okay. Thanks for checking. Don't see a set of rear inners for 69-71. __________________ 1961 C1 Corvette 1959 El Camino 350 TPI, 9" 4 w disc 69 Blazer K5 - sold July '20 2021 Durango RT 5.7

02-27-2011, 07:57 AM	#25
72gmguy Senior Member Join Date: Mar 2009 Location: Brigantine NJ Posts: 822	Re: Selling off Blazer parts Tough to see the red seats. What are they out of and do they have seat tracks on them? Thanks.

Register or Log In To remove these advertisements.