71 K20 For Sale Stainless Flat Bed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dean · 03-17-2003, 10:35 AM

It is time for some spring cleaning. I have decided that I already have enough 71 K20s and I don't need this one. I purchased this 71 K20 over 5 years ago with the intent to do another body swap. It has been in my garage all that time and it was sitting in a barn for at least five years when I found it. Here are the specs on it as I know. 350 cu in, 4 speed, NP205, Eaton rearend (4.56 gear) and Dana 44 (4.56 gear). The 350 seems to run fine. I started it yesterday for the first time in years and it started right up with very old gas with no abnormal noises or smoke. It needs a tune up for sure. Appears stock except for an aluminum Eldebrock manifold which has a quadrajet on it. Engine has headers on it but they are rusted out. I have a good set of headers that I'll throw in if headers are your thing. Truck has a Stainless Steel flatbed on it with brackets to install side boards. Previous owner told me he intended to make this a hydraulic dump bed. It has massive front and rear homemaid bumpers. Truck has a GMC grill in it for some reason. The body is very rusty and not useable in my opinion. There is a homemade body lift on it. Truck has 36" old Humvee tires on chrome slots (rusty). Two additional white spoke wheels and tires go with it. There is also a useable set of 33" tires on the bed. Interior is basically shot. It has some buckets from another vehicle in it. Truck was originally ocre color or baby **** yellow as some call it. All 4x4 stuff works along with brakes. Perfect for a body swap project! Use the stainless flatbed or remove it for a standard bed. Located near Cincinnati Ohio. $1500 or I'll make you a package deal if you would also like a 72 Jimmy 4x4 rolling chassis. Email me at cody1015@aol.com or call 513-732-0084 in the evenings.

Dean · 03-17-2003, 10:36 AM

engine view

Dean · 03-17-2003, 10:37 AM

side

Dean · 03-17-2003, 10:38 AM

glovebox

Dean · 03-17-2003, 10:39 AM

hubs

Dean · 03-17-2003, 10:40 AM

isn't this a beauty of an interior?

Dean · 03-17-2003, 10:43 AM

rearend

Dean · 03-17-2003, 10:43 AM

rear

Dean · 03-17-2003, 08:31 PM

ttt

Dean · 03-18-2003, 05:08 PM

needs a tender loving new home. truck is getting jealous of my other projects.....

Dean · 03-24-2003, 03:57 PM

ttt.

Dean · 03-30-2003, 09:30 PM

More pics from when the last time I had it out of the garage. Email me with any questions.

Dean · 03-30-2003, 09:32 PM

another

Dean · 03-30-2003, 09:33 PM

3

Dean · 04-04-2003, 02:51 PM

Anyone wanting to convert 2WD to a 4WD?

TP from Cntl PA · 04-11-2003, 08:48 PM

Do you still have this truck? How is the Cab floor and cowl? That is just what I am looking for as I need a 3/4 farm truck!

Blue_71 · 04-11-2003, 09:21 PM

any idea how much it's lifted?

71402BB · 04-12-2003, 03:30 AM

now thats a REAL TRUCK! good luck with the sale!

Dean · 05-02-2003, 10:07 AM

ttt.

Dean · 05-21-2003, 12:31 PM

Reduced to $1,250.00.

gmcjmy72 · 05-21-2003, 06:10 PM

Emailed ya!

Dean · 06-17-2003, 12:38 PM

I dug the truck out of the garage this weekend and have been driving it around the field making noise. Ready to load on your trailer for that next project!! Make the wife proud of you.

1969 GMC · 06-17-2003, 10:49 PM

that would be a great parts vehicle for my GMC...too bad it's so far away...

sweet n rare67 · 06-18-2003, 10:03 AM

Are willing to sell the rolling 4x4 chassis, if so i may be interested

ZOOMY · 06-19-2003, 12:41 AM

Are you open to offers ? My neighbor wants a mudder, but only wants to spend 5 or 6 hundred......Zoomy

03-17-2003, 10:35 AM	#1
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	71 K20 For Sale Stainless Flat Bed It is time for some spring cleaning. I have decided that I already have enough 71 K20s and I don't need this one. I purchased this 71 K20 over 5 years ago with the intent to do another body swap. It has been in my garage all that time and it was sitting in a barn for at least five years when I found it. Here are the specs on it as I know. 350 cu in, 4 speed, NP205, Eaton rearend (4.56 gear) and Dana 44 (4.56 gear). The 350 seems to run fine. I started it yesterday for the first time in years and it started right up with very old gas with no abnormal noises or smoke. It needs a tune up for sure. Appears stock except for an aluminum Eldebrock manifold which has a quadrajet on it. Engine has headers on it but they are rusted out. I have a good set of headers that I'll throw in if headers are your thing. Truck has a Stainless Steel flatbed on it with brackets to install side boards. Previous owner told me he intended to make this a hydraulic dump bed. It has massive front and rear homemaid bumpers. Truck has a GMC grill in it for some reason. The body is very rusty and not useable in my opinion. There is a homemade body lift on it. Truck has 36" old Humvee tires on chrome slots (rusty). Two additional white spoke wheels and tires go with it. There is also a useable set of 33" tires on the bed. Interior is basically shot. It has some buckets from another vehicle in it. Truck was originally ocre color or baby **** yellow as some call it. All 4x4 stuff works along with brakes. Perfect for a body swap project! Use the stainless flatbed or remove it for a standard bed. Located near Cincinnati Ohio. $1500 or I'll make you a package deal if you would also like a 72 Jimmy 4x4 rolling chassis. Email me at cody1015@aol.com or call 513-732-0084 in the evenings. Attached Images

03-17-2003, 10:36 AM	#2
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	engine view Attached Images

03-17-2003, 10:37 AM	#3
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	side Attached Images

03-17-2003, 10:38 AM	#4
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	glovebox Attached Images

03-17-2003, 10:39 AM	#5
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	hubs Attached Images

03-17-2003, 10:40 AM	#6
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	isn't this a beauty of an interior? Attached Images

03-17-2003, 10:43 AM	#7
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	rearend Attached Images

03-17-2003, 10:43 AM	#8
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	rear Attached Images

03-17-2003, 08:31 PM	#9
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	ttt

03-18-2003, 05:08 PM	#10
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	needs a tender loving new home. truck is getting jealous of my other projects.....

03-24-2003, 03:57 PM	#11
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	ttt.

03-30-2003, 09:30 PM	#12
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	More pics from when the last time I had it out of the garage. Email me with any questions. Attached Images

03-30-2003, 09:32 PM	#13
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	another Attached Images

03-30-2003, 09:33 PM	#14
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	3 Attached Images

04-04-2003, 02:51 PM	#15
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	Anyone wanting to convert 2WD to a 4WD?



Register or Log In To remove these advertisements.

04-11-2003, 08:48 PM	#16
TP from Cntl PA Registered User Join Date: Apr 2003 Location: Central PA....In the Berg of Nisbet Posts: 790	Do you still have this truck? How is the Cab floor and cowl? That is just what I am looking for as I need a 3/4 farm truck! __________________ '72 K-20 EFI'ed 250 Inline/4spd stake body, Farm Truck '71 C-20 Cummins Diesel Powered, In storage thanks to $5.00 diesel! '69 3500 GMC 305V-6/4spd, Still under reconstruction.......... Inlines Rule! 6 soldiers standing is better than 8 laying down!!!!!!!!

04-12-2003, 03:30 AM	#18
71402BB now thats a true COON DOG Join Date: Nov 2000 Location: Franconia, NH Posts: 1,977	now thats a REAL TRUCK! good luck with the sale! __________________ current project 67 402BB stout th350 3.08's with a locker. Plan on tubs 18.5's out back! (thanks Burnsman!) 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's ( was crushed by a tree, bed sold, motor pulled) was my first truck!... oh well... 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE work in progress, soon to have 250-I6 with a 3-speed on the tree 4.11's and posi ( currently sitting in back yard tarped awaiting time, $$$, and lots of love!) 67 1 TON- work truck 396 sm 420 4-speed, flat bed 4.57 gears "big red" (my first landscape truck, very rusty and crusty! but still gets the job done when needed!)

05-02-2003, 10:07 AM	#19
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	ttt.

05-21-2003, 12:31 PM	#20
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	Reduced to $1,250.00.

05-21-2003, 06:10 PM	#21
gmcjmy72 Registered User Join Date: Jan 2001 Location: Cincinnati, Ohio USA Posts: 83	Emailed ya! __________________ 72 Jimmy 4x4 Yellow/black int. stock 350 4bbl auto 3.73 gear 72 C/10 350 4bbl auto 3.07 rear ps pb fact. air No chrome...BRONZE... 67 3/4 ton longfleet basic truck, current project

06-17-2003, 12:38 PM	#22
Dean Senior Member Join Date: Jan 2000 Location: Cincinnati, Ohio Posts: 1,492	I dug the truck out of the garage this weekend and have been driving it around the field making noise. Ready to load on your trailer for that next project!! Make the wife proud of you.

06-17-2003, 10:49 PM	#23
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	that would be a great parts vehicle for my GMC...too bad it's so far away... __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

06-18-2003, 10:03 AM	#24
sweet n rare67 Young truck fanatic Join Date: Jun 2003 Location: The wonderful Mat-Su Valley....Palmer, Ak Posts: 253	Are willing to sell the rolling 4x4 chassis, if so i may be interested

06-19-2003, 12:41 AM	#25
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	offers ? Are you open to offers ? My neighbor wants a mudder, but only wants to spend 5 or 6 hundred......Zoomy

Register or Log In To remove these advertisements.