Front Air Deflectors - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LiveAnimals · 03-21-2011, 03:26 PM

Where did you guys purchase yours? I'm looking to get one for my Suburban. Also wondering if there is a difference in quality.

piecesparts · 03-21-2011, 03:47 PM

lower air dam or the hood air deflector?

I have a Lund hood protector on my son's 86 truck. It keeps the hood from getting pitted, but does not stick up so high that it is unsightly.

LiveAnimals · 03-21-2011, 03:57 PM

Lower. LMC calls them air deflectors.
Posted via Mobile Device

gchemist · 03-21-2011, 08:33 PM

Don't put a 4X4 air deflector on a lowered truck!! The increased drag is HUGE!! I went back to a 4X2 and the drag was reduced.

LiveAnimals · 03-21-2011, 08:44 PM

It's going on the 3/4 ton 4x4 Suburban in my signature. I just wanted some input on where people are buying them.
Posted via Mobile Device

SBTork · 03-21-2011, 09:09 PM

if you're talking 81-87 then GM dealer.

kelsfine69 · 03-22-2011, 05:54 PM

Quote:

Originally Posted by SBTork

if you're talking 81-87 then GM dealer.

They are still available?

1tonchevy · 03-21-2011, 10:20 PM

Quote:

Originally Posted by gchemist

Don't put a 4X4 air deflector on a lowered truck!! The increased drag is HUGE!! I went back to a 4X2 and the drag was reduced.

lol they can't be that bad can they? it's not like hes going for a land speed record.

gchemist · 03-21-2011, 10:11 PM

www.certifit.com has them, I think.

gchemist · 03-22-2011, 12:08 AM

On my truck yes. At 70 MPH, I could definately notice the drag. All the air was being pushed around the truck. Some air needs to go under the truck. The 4X4 version is taller than a 4X2. On a 4X4, the larger deflector looks great but really does not work like on a 4X2.

pig rig · 03-22-2011, 07:10 AM

I put the 4wd one on my crew cab and it didnt seem to make much differance but it sure did make the front end look better
had a few people ask if Id lowered it more

1tonchevy · 03-22-2011, 10:08 AM

Quote:

Originally Posted by gchemist

On my truck yes. At 70 MPH, I could definately notice the drag. All the air was being pushed around the truck. Some air needs to go under the truck. The 4X4 version is taller than a 4X2. On a 4X4, the larger deflector looks great but really does not work like on a 4X2.

hmm i'm with pig i have one on my Crew dually and it looks good and dosnt see to do much else.

Top Banana · 03-22-2011, 07:14 AM

I tried to put one on recently and could only get one end and two more bolts in it. I wound up chucking it it was so far off. I'm looking for another brand

LiveAnimals · 03-22-2011, 01:13 PM

Quote:

Originally Posted by Top Banana

I tried to put one on recently and could only get one end and two more bolts in it. I wound up chucking it it was so far off. I'm looking for another brand

Do you remember the brand?
Posted via Mobile Device

Top Banana · 03-22-2011, 02:17 PM

Quote:

Originally Posted by LiveAnimals

Do you remember the brand?
Posted via Mobile Device

Tong Yang; so it could be "branded" Tong Yand, OTN, or Ding Chang depending on who you buy it from. It was too narrow, didn't bow in the center to follow the bumper and MOST holes we couldn't even get close

silvereagle07 · 03-22-2011, 08:30 AM

My dad just got one from LMC for his 85 and it fit decent.
http://www.lmctruck.com/features/cc/CCBD4.htm

harnalien · 03-22-2011, 06:57 PM

I got mine from the dealer 2 years ago. About 45 bucks if I remember correctly. It wasn't more than 80 though.
Posted via Mobile Device

thirdstreettito · 03-22-2011, 07:33 PM

My burb and my K10 both had em stock.

1LowToy · 03-22-2011, 11:16 PM

These truck are about as aero dynamic as a brick. I may just shortin mine up a bit since it's lowered and have all that I6 power

LiveAnimals · 03-23-2011, 04:57 PM

So far I've looked at Brothers, Goodmark, LMC, Classic Industries, and Classic Truck Parts and LMC seems to be the only one with the tow hook cutouts.
Posted via Mobile Device

kelsfine69 · 03-23-2011, 05:05 PM

I think that when we used to replace them from GM may years ago they came with no cutouts. You had to do it yourself. On the back there were lines to follow.

Slonaker · 03-23-2011, 05:08 PM

Quote:

Originally Posted by kelsfine69

I think that when we used to replace them from GM may years ago they came with no cutouts. You had to do it yourself. On the back there were lines to follow.

That was what the dealer told me when I bought mine. I didn't need the cutouts because I have a 2WD. I don't know if there were lines on the back, though.

Slonaker

camshaftgsxr · 03-23-2011, 05:09 PM

you think GM still has them?

can anyone comment on the fit from LMC, they arent known for their quality...

motornut · 03-23-2011, 05:14 PM

hmmmmmmm cut outs are cool...gona have a look i want one on the 78

RandyP · 03-23-2011, 05:33 PM

If it helps any, here is the part #'s on them. Appears the one with cutouts is discontinued but the solid one is still around. The foot note makes me think you just cut it out as needed, so no doubt there would be a scribe line on the back to show you where to cut.

*edit*
Went and looked up a 78 model, and this is what it shows. For some reason my book does not pull anything up for lower deflectors beyond this.

03-21-2011, 03:26 PM	#1
LiveAnimals Registered User Join Date: Dec 2008 Location: Antelope, CA Posts: 681	Front Air Deflectors Where did you guys purchase yours? I'm looking to get one for my Suburban. Also wondering if there is a difference in quality. __________________ Kameron YESTERDAY IS HISTORY - TOMORROW IS A MYSTERY I'm a Middle ClASS HOLE 07.5 Dodge 3500 CTD -- Daily 73 C10 Factory BB SWB 2WD

03-21-2011, 03:47 PM	#2
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: Front Air Deflectors lower air dam or the hood air deflector? I have a Lund hood protector on my son's 86 truck. It keeps the hood from getting pitted, but does not stick up so high that it is unsightly. __________________ Frank

03-21-2011, 03:57 PM	#3
LiveAnimals Registered User Join Date: Dec 2008 Location: Antelope, CA Posts: 681	Re: Front Bumper Air Deflectors Lower. LMC calls them air deflectors. Posted via Mobile Device __________________ Kameron YESTERDAY IS HISTORY - TOMORROW IS A MYSTERY I'm a Middle ClASS HOLE 07.5 Dodge 3500 CTD -- Daily 73 C10 Factory BB SWB 2WD

03-21-2011, 08:33 PM	#4
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: Front Air Deflectors Don't put a 4X4 air deflector on a lowered truck!! The increased drag is HUGE!! I went back to a 4X2 and the drag was reduced. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

03-21-2011, 08:44 PM	#5
LiveAnimals Registered User Join Date: Dec 2008 Location: Antelope, CA Posts: 681	Re: Front Air Deflectors It's going on the 3/4 ton 4x4 Suburban in my signature. I just wanted some input on where people are buying them. Posted via Mobile Device __________________ Kameron YESTERDAY IS HISTORY - TOMORROW IS A MYSTERY I'm a Middle ClASS HOLE 07.5 Dodge 3500 CTD -- Daily 73 C10 Factory BB SWB 2WD

03-21-2011, 09:09 PM	#6
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,855	Re: Front Air Deflectors if you're talking 81-87 then GM dealer. __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

03-21-2011, 10:11 PM	#9
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: Front Air Deflectors www.certifit.com has them, I think. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

03-22-2011, 12:08 AM	#10
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: Front Air Deflectors On my truck yes. At 70 MPH, I could definately notice the drag. All the air was being pushed around the truck. Some air needs to go under the truck. The 4X4 version is taller than a 4X2. On a 4X4, the larger deflector looks great but really does not work like on a 4X2. __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

03-22-2011, 07:10 AM	#11
pig rig Registered User Join Date: Feb 2009 Location: washington the state Posts: 730	Re: Front Air Deflectors I put the 4wd one on my crew cab and it didnt seem to make much differance but it sure did make the front end look better had a few people ask if Id lowered it more __________________ my sports car rolls on six wheels only because I'm to fat to get in and out of new corvette http://hubgarage.s3.amazonaws.com/ph...ped_detail.JPG

03-22-2011, 07:14 AM	#13
Top Banana Registered User Join Date: Jun 2010 Location: Lynchburg, VA Posts: 313	Re: Front Air Deflectors I tried to put one on recently and could only get one end and two more bolts in it. I wound up chucking it it was so far off. I'm looking for another brand __________________ http://www.topbananaparts.com

03-22-2011, 08:30 AM	#16
silvereagle07 Registered User Join Date: Sep 2008 Location: Bailey, NC Posts: 2,462	Re: Front Air Deflectors My dad just got one from LMC for his 85 and it fit decent. http://www.lmctruck.com/features/cc/CCBD4.htm __________________ Jeramy '84 GMC project truck '85 Chevy 4X4 SOLD '07 Chevy Trailblazer SS 5th Annual SHPHC Car/Truck Show Pics http://67-72chevytrucks.com/vboard/s...d.php?t=543605 UPDATED PICS! CHECK 'EM OUT

03-22-2011, 06:57 PM	#17
harnalien TruckincrazY Join Date: May 2004 Location: Haslet, TX Posts: 493	Re: Front Air Deflectors I got mine from the dealer 2 years ago. About 45 bucks if I remember correctly. It wasn't more than 80 though. Posted via Mobile Device __________________ My build thread - '84 2wd w/ a 6.0 swap http://67-72chevytrucks.com/vboard/s...d.php?t=433595

03-22-2011, 07:33 PM	#18
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: Front Air Deflectors My burb and my K10 both had em stock. Attached Images __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

03-22-2011, 11:16 PM	#19
1LowToy Registered User Join Date: Nov 2009 Location: Sonora California Posts: 860	Re: Front Air Deflectors These truck are about as aero dynamic as a brick. I may just shortin mine up a bit since it's lowered and have all that I6 power

03-23-2011, 04:57 PM	#20
LiveAnimals Registered User Join Date: Dec 2008 Location: Antelope, CA Posts: 681	Re: Front Air Deflectors So far I've looked at Brothers, Goodmark, LMC, Classic Industries, and Classic Truck Parts and LMC seems to be the only one with the tow hook cutouts. Posted via Mobile Device __________________ Kameron YESTERDAY IS HISTORY - TOMORROW IS A MYSTERY I'm a Middle ClASS HOLE 07.5 Dodge 3500 CTD -- Daily 73 C10 Factory BB SWB 2WD



Register or Log In To remove these advertisements.

03-23-2011, 05:05 PM	#21
kelsfine69 18 Till I Die Join Date: Mar 2005 Location: Alberta, Canada Posts: 1,522	Re: Front Air Deflectors I think that when we used to replace them from GM may years ago they came with no cutouts. You had to do it yourself. On the back there were lines to follow. __________________ 2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home...

03-23-2011, 05:09 PM	#23
camshaftgsxr Registered User Join Date: Feb 2010 Location: Asheville, N.C. Posts: 785	Re: Front Air Deflectors you think GM still has them? can anyone comment on the fit from LMC, they arent known for their quality... __________________

03-23-2011, 05:14 PM	#24
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: Front Air Deflectors hmmmmmmm cut outs are cool...gona have a look i want one on the 78 __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350

03-23-2011, 05:33 PM	#25
RandyP Getting Old; Going Broke Join Date: Apr 2010 Location: Owasso OK Posts: 2,764	Re: Front Air Deflectors If it helps any, here is the part #'s on them. Appears the one with cutouts is discontinued but the solid one is still around. The foot note makes me think you just cut it out as needed, so no doubt there would be a scribe line on the back to show you where to cut. edit Went and looked up a 78 model, and this is what it shows. For some reason my book does not pull anything up for lower deflectors beyond this. Attached Images __________________ *Why is every used 350 sbc out of a corvette?* There's only two things that excite a man, expensive toys and real expensive toys. *VEGETARIAN: That's an old Indian word meaning "I don't hunt so good."* When the going gets tough, switch to power tools. Last edited by RandyP; 03-23-2011 at 05:38 PM.

Register or Log In To remove these advertisements.