IN WTB Cab patch panel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ewoody625 · 03-27-2011, 12:35 AM

I'm looking to replace the driver side cab corner. I'm looking for a patch from about where the vin tag goes, down to the bottom of the cab and wrap around the back a little and inside the door frame. I have a pic of what I'm looking for but its not the best. I can get a better pic if needed.
Thanks
Eric

KrazyRay · 03-27-2011, 11:34 AM

Eric, My 72 Gmc had rust, but I have a 71 with a clean cab corner that I need to pull out of the mud when the rain stops today. $40 plus shipping...I can get pics soon.
Thanks,
Ray

ewoody625 · 03-27-2011, 05:55 PM

Sounds good ray can u get me some pics and a quote to 46385?
Thanks
Eric
Posted via Mobile Device

KrazyRay · 03-27-2011, 11:27 PM

I'm guessing around $25-$30, but I won't know exact until it is cut and weighed. I will charge whatever fedex wants for shipping. If its more than $30, then I will pay the extra.
Thanks,
Ray

KrazyRay · 03-28-2011, 08:13 PM

The shipping is only $18 for a total of $58 shipped.

ewoody625 · 03-28-2011, 08:46 PM

Looks good ray. How far did you cut inside on the door frame? It should clean up pretty nice right?
Posted via Mobile Device

KrazyRay · 03-29-2011, 12:08 AM

I cut 1" past the door frame on the floor. This cab corner should clean up nice. The only issue would be the holes for the lower trim. They are a little indented, but can be easily tapped out. If you are running lower trim, there will almost no work. Hopefully this works for you.
Thanks,
Ray

ewoody625 · 03-30-2011, 03:20 PM

Ray i also need a right rear bed 1/4 would you happen to have one?

KrazyRay · 03-30-2011, 11:01 PM

Yes, I have a long bed. The right rear is solid with a few dings. Give me a measurement from the tail lights forward of how much you need. I'm guessing that you need top to bottom. I can get pics and price Fri. or Sat.
Thanks,
Ray

ewoody625 · 03-30-2011, 11:05 PM

Awesome i'll get a pic and measurements for you this weekend. Thanks ray
Posted via Mobile Device

ewoody625 · 03-30-2011, 11:08 PM

Oh also would you be able to send me a pic of the door frame of the cab piece? Thanks
Posted via Mobile Device

KrazyRay · 03-30-2011, 11:34 PM

Its in great shape. I'll get pics Fri. or Sat.

KrazyRay · 04-02-2011, 02:40 AM

pics of donor bed...I will get pics of door frame Sat.

KrazyRay · 04-03-2011, 11:17 AM

door jam pic...I have more good patches if anyone needs one.

ewoody625 · 04-03-2011, 04:29 PM

Ray I measured my 1/4 and took some pics for you. yours looks nice. I measured 33 in long and 9 in high, that would put it 1 or 2 in above the body line. one question I have is does it have the line in the wheel opening? heres some pics of what i need. What do you need to get for this? is it possible to combine shipping?

maxxom · 04-03-2011, 11:42 PM

Quote:

Originally Posted by KrazyRay

door jam pic...I have more good patches if anyone needs one.

Do you have a rust free roof available. If so let me know what the cost would be. Need the entire roof with pillars.

03-27-2011, 12:35 AM	#1
ewoody625 Registered User Join Date: Jan 2009 Location: valparaiso,in Posts: 730	WTB Cab patch panel I'm looking to replace the driver side cab corner. I'm looking for a patch from about where the vin tag goes, down to the bottom of the cab and wrap around the back a little and inside the door frame. I have a pic of what I'm looking for but its not the best. I can get a better pic if needed. Thanks Eric Attached Images __________________ Eric 70 CST10 long bed in pieces also factory air and cruise(the project) 18 Silverado crew cab 5.3 4x4 My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=402166

03-27-2011, 11:34 AM	#2
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: WTB Cab patch panel Eric, My 72 Gmc had rust, but I have a 71 with a clean cab corner that I need to pull out of the mud when the rain stops today. $40 plus shipping...I can get pics soon. Thanks, Ray

03-27-2011, 05:55 PM	#3
ewoody625 Registered User Join Date: Jan 2009 Location: valparaiso,in Posts: 730	Re: WTB Cab patch panel Sounds good ray can u get me some pics and a quote to 46385? Thanks Eric Posted via Mobile Device __________________ Eric 70 CST10 long bed in pieces also factory air and cruise(the project) 18 Silverado crew cab 5.3 4x4 My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=402166

03-27-2011, 11:27 PM	#4
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: WTB Cab patch panel I'm guessing around $25-$30, but I won't know exact until it is cut and weighed. I will charge whatever fedex wants for shipping. If its more than $30, then I will pay the extra. Thanks, Ray Attached Images

03-28-2011, 08:13 PM	#5
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: WTB Cab patch panel The shipping is only $18 for a total of $58 shipped. Attached Images

03-28-2011, 08:46 PM	#6
ewoody625 Registered User Join Date: Jan 2009 Location: valparaiso,in Posts: 730	Re: WTB Cab patch panel Looks good ray. How far did you cut inside on the door frame? It should clean up pretty nice right? Posted via Mobile Device __________________ Eric 70 CST10 long bed in pieces also factory air and cruise(the project) 18 Silverado crew cab 5.3 4x4 My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=402166

03-29-2011, 12:08 AM	#7
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: WTB Cab patch panel I cut 1" past the door frame on the floor. This cab corner should clean up nice. The only issue would be the holes for the lower trim. They are a little indented, but can be easily tapped out. If you are running lower trim, there will almost no work. Hopefully this works for you. Thanks, Ray

03-30-2011, 03:20 PM	#8
ewoody625 Registered User Join Date: Jan 2009 Location: valparaiso,in Posts: 730	Re: WTB Cab patch panel Ray i also need a right rear bed 1/4 would you happen to have one? __________________ Eric 70 CST10 long bed in pieces also factory air and cruise(the project) 18 Silverado crew cab 5.3 4x4 My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=402166

03-30-2011, 11:01 PM	#9
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: WTB Cab patch panel Yes, I have a long bed. The right rear is solid with a few dings. Give me a measurement from the tail lights forward of how much you need. I'm guessing that you need top to bottom. I can get pics and price Fri. or Sat. Thanks, Ray

03-30-2011, 11:05 PM	#10
ewoody625 Registered User Join Date: Jan 2009 Location: valparaiso,in Posts: 730	Re: WTB Cab patch panel Awesome i'll get a pic and measurements for you this weekend. Thanks ray Posted via Mobile Device __________________ Eric 70 CST10 long bed in pieces also factory air and cruise(the project) 18 Silverado crew cab 5.3 4x4 My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=402166

03-30-2011, 11:08 PM	#11
ewoody625 Registered User Join Date: Jan 2009 Location: valparaiso,in Posts: 730	Re: WTB Cab patch panel Oh also would you be able to send me a pic of the door frame of the cab piece? Thanks Posted via Mobile Device __________________ Eric 70 CST10 long bed in pieces also factory air and cruise(the project) 18 Silverado crew cab 5.3 4x4 My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=402166

03-30-2011, 11:34 PM	#12
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: WTB Cab patch panel Its in great shape. I'll get pics Fri. or Sat.

04-02-2011, 02:40 AM	#13
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: WTB Cab patch panel pics of donor bed...I will get pics of door frame Sat. Attached Images

04-03-2011, 11:17 AM	#14
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: WTB Cab patch panel door jam pic...I have more good patches if anyone needs one. Attached Images

04-03-2011, 04:29 PM	#15
ewoody625 Registered User Join Date: Jan 2009 Location: valparaiso,in Posts: 730	Re: WTB Cab patch panel Ray I measured my 1/4 and took some pics for you. yours looks nice. I measured 33 in long and 9 in high, that would put it 1 or 2 in above the body line. one question I have is does it have the line in the wheel opening? heres some pics of what i need. What do you need to get for this? is it possible to combine shipping? Attached Images __________________ Eric 70 CST10 long bed in pieces also factory air and cruise(the project) 18 Silverado crew cab 5.3 4x4 My build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=402166



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.