AZ 81 1 ton 4x4 for parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**t korinek** · 04-06-2011, 12:35 AM

For parts 81 Chevy truck single cab 454, ac, dana 44 front with old school lock outs, 14 bolt rear 205 4 speed,
Deep 16.5 rear wheels, look to be 10" wide 16.5's $50 each
Let me know if you need anything, & I'll price it
Interior is not too good
also for parts locally
Thanks,
Tom

CORSAIR · 04-06-2011, 12:38 AM

I need the two center division bars and latch on the back window?
If they are there and you want to sell let me know how much shipped to 89048 NV

Thanks,
Corsair

**too much stuff** · 04-06-2011, 08:44 AM

Tach dash?

**t korinek** · 04-07-2011, 12:27 AM

corsair, the bars are there, the latch is not

too much stuff No tach dash

classic lover · 04-07-2011, 07:21 AM

Quote:

Originally Posted by t korinek

corsair, the bars are there, the latch is not

too much stuff No tach dash

if corsair don't want the bars i will take them

we taking about the rear sliding window bars right =)

geod919 · 04-07-2011, 02:11 AM

How much for the driver side window rear track shipped to 41051?

**t korinek** · 04-07-2011, 02:12 AM

geod919 $22 shipped

geod919 · 04-07-2011, 02:15 AM

paypal?

K30_dump · 04-07-2011, 03:03 AM

Hello,

How far apart are you taking this? I've been searching for good rear spring hangers (rearmost) and possibly the reinforcements for the rear leaf front hangers. Spring crossmember? All of this os of course specific to a K30 frame. Not sure if it'd be worthwhile for either of us by the time you cut them off, but figured I'd check

.

Thanks,

Joe

P.S. - Shipping would be to 17740...

**t korinek** · 04-07-2011, 04:31 AM

K30dump, getting those parts not out of the question, i was hoping to sell the frame whole to someone, if that doesn't happen & I wind up taking it to scrap I would cut those brackets off, if you have time give it a couple weeks to see what happens.
Thanks,
Tom

babyJay · 04-07-2011, 10:09 AM

Quote:

Originally Posted by t korinek

K30dump, getting those parts not out of the question, i was hoping to sell the frame whole to someone, if that doesn't happen & I wind up taking it to scrap I would cut those brackets off, if you have time give it a couple weeks to see what happens.
Thanks,
Tom

If this happens, I would be interested in the uppermost leaf in the rear spring packs, provided they are the 2.5 inch and not the 3inch wide springs.

CORSAIR · 04-07-2011, 10:47 AM

How much for the bars shipped to 89048

Thanks,
Fred

**t korinek** · 04-07-2011, 02:18 PM

Corsair Hows $20 shipped sound
Won't be able to ship till monday

babyJay, I'll keep you in mind

K30_dump · 04-07-2011, 09:32 PM

Quote:

Originally Posted by t korinek

K30dump, getting those parts not out of the question, i was hoping to sell the frame whole to someone, if that doesn't happen & I wind up taking it to scrap I would cut those brackets off, if you have time give it a couple weeks to see what happens.
Thanks,
Tom

Tom,

By all means, if you can sell it whole and avoid cutting a good K30 frame, I don't blame you a bit

. Let me know though, not a huge rush. Mine are there but rusted

...

Thanks,

Joe
Posted via Mobile Device

SS Delux · 04-08-2011, 05:48 PM

I asume that the battery in the engine compartment pic is on a battery tray, if so how badly rusted is it and how much to N9G2A7 Canada ?

duallyjams · 04-11-2011, 07:46 AM

Hey Tom can you post a pic of the front axle.81 had either a corp 10B or D60.The only way it has a D44 is if some one swapped it out.

**special-K** · 04-11-2011, 10:13 AM

You should get a picture of that front axle. It's either a Dana60,which an '81 K/30 would have,or it's an older Dana44 swapped-in. It has the large diameter hubs.

**t korinek** · 04-11-2011, 11:51 AM

It has been swapped out for a dana 44

CORSAIR · 04-11-2011, 12:24 PM

Tom,
I havent heard from you regarding the window parts? let me know how you want to proceed?

Thanks,
Fred

**special-K** · 04-11-2011, 12:54 PM

Quote:

Originally Posted by t korinek

It has been swapped out for a dana 44

It did look that way. Are those Selectro hubs?

**t korinek** · 04-12-2011, 12:10 AM

special-K Yep selectro hubs

corsair, your pieces are off & will ship tuesday

ssdelux, I'll check that battery tray out.

I have a D60 kingpin front & matching 14 bolt rear, I'd have to get $1200 for the pair, they are in an 89 1 ton service truck, single rear axle.
Its a running driving fuel injected 350, turbo 400, & 205.
Tom

duallyjams · 04-12-2011, 08:12 AM

Would you separate the np205 to sell ?

1979 GMC Sierra · 04-15-2011, 12:49 AM

What condition is the drivers side fuel tank filler neck ?

Travis

K30_dump · 04-16-2011, 08:47 AM

Tom,

Any word on the frame? Still looking for rear spring hangers, possibly crossmember...

Let me know, thanks!!

Joe

Sandemonium · 10-25-2012, 03:09 PM

Tom,

Is the fuel filler still available?

If so, what are you asking for it?

Thank you,

Bob
Posted via Mobile Device

04-06-2011, 12:35 AM	#1
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,194	81 1 ton 4x4 for parts For parts 81 Chevy truck single cab 454, ac, dana 44 front with old school lock outs, 14 bolt rear 205 4 speed, Deep 16.5 rear wheels, look to be 10" wide 16.5's $50 each Let me know if you need anything, & I'll price it Interior is not too good also for parts locally Thanks, Tom Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

04-06-2011, 12:38 AM	#2
CORSAIR Registered User Join Date: Dec 2010 Location: Pahrump, Nevada Posts: 451	Re: 81 1 ton 4x4 for parts I need the two center division bars and latch on the back window? If they are there and you want to sell let me know how much shipped to 89048 NV Thanks, Corsair __________________ "The Can't Family Lives Across The Street"

04-06-2011, 08:44 AM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,788	Re: 81 1 ton 4x4 for parts Tach dash? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-07-2011, 12:27 AM	#4
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,194	Re: 81 1 ton 4x4 for parts corsair, the bars are there, the latch is not too much stuff No tach dash __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

04-07-2011, 02:11 AM	#6
geod919 Registered User Join Date: Mar 2010 Location: Independence, ky Posts: 39	Re: 81 1 ton 4x4 for parts How much for the driver side window rear track shipped to 41051?

04-07-2011, 02:12 AM	#7
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,194	Re: 81 1 ton 4x4 for parts geod919 $22 shipped __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

04-07-2011, 02:15 AM	#8
geod919 Registered User Join Date: Mar 2010 Location: Independence, ky Posts: 39	Re: 81 1 ton 4x4 for parts paypal?

04-07-2011, 03:03 AM	#9
K30_dump Registered User Join Date: Oct 2007 Location: Pennsylvania Posts: 164	Re: 81 1 ton 4x4 for parts Hello, How far apart are you taking this? I've been searching for good rear spring hangers (rearmost) and possibly the reinforcements for the rear leaf front hangers. Spring crossmember? All of this os of course specific to a K30 frame. Not sure if it'd be worthwhile for either of us by the time you cut them off, but figured I'd check . Thanks, Joe P.S. - Shipping would be to 17740... Last edited by K30_dump; 04-07-2011 at 03:04 AM.

04-07-2011, 04:31 AM	#10
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,194	Re: 81 1 ton 4x4 for parts K30dump, getting those parts not out of the question, i was hoping to sell the frame whole to someone, if that doesn't happen & I wind up taking it to scrap I would cut those brackets off, if you have time give it a couple weeks to see what happens. Thanks, Tom __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

04-07-2011, 10:47 AM	#12
CORSAIR Registered User Join Date: Dec 2010 Location: Pahrump, Nevada Posts: 451	Re: 81 1 ton 4x4 for parts How much for the bars shipped to 89048 Thanks, Fred __________________ "The Can't Family Lives Across The Street"

04-07-2011, 02:18 PM	#13
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,194	Re: 81 1 ton 4x4 for parts Corsair Hows $20 shipped sound Won't be able to ship till monday babyJay, I'll keep you in mind __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ! Last edited by t korinek; 04-07-2011 at 02:19 PM.

04-08-2011, 05:48 PM	#15
SS Delux Registered User Join Date: Jun 2010 Location: windsor Posts: 290	Re: 81 1 ton 4x4 for parts I asume that the battery in the engine compartment pic is on a battery tray, if so how badly rusted is it and how much to N9G2A7 Canada ?

04-11-2011, 07:46 AM	#16
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 81 1 ton 4x4 for parts Hey Tom can you post a pic of the front axle.81 had either a corp 10B or D60.The only way it has a D44 is if some one swapped it out. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

04-11-2011, 10:13 AM	#17
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 81 1 ton 4x4 for parts You should get a picture of that front axle. It's either a Dana60,which an '81 K/30 would have,or it's an older Dana44 swapped-in. It has the large diameter hubs. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-11-2011, 11:51 AM	#18
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,194	Re: 81 1 ton 4x4 for parts It has been swapped out for a dana 44 __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!



Register or Log In To remove these advertisements.

04-11-2011, 12:24 PM	#19
CORSAIR Registered User Join Date: Dec 2010 Location: Pahrump, Nevada Posts: 451	Re: 81 1 ton 4x4 for parts Tom, I havent heard from you regarding the window parts? let me know how you want to proceed? Thanks, Fred __________________ "The Can't Family Lives Across The Street"

04-12-2011, 12:10 AM	#21
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,194	Re: 81 1 ton 4x4 for parts special-K Yep selectro hubs corsair, your pieces are off & will ship tuesday ssdelux, I'll check that battery tray out. I have a D60 kingpin front & matching 14 bolt rear, I'd have to get $1200 for the pair, they are in an 89 1 ton service truck, single rear axle. Its a running driving fuel injected 350, turbo 400, & 205. Tom Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

04-12-2011, 08:12 AM	#22
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 81 1 ton 4x4 for parts Would you separate the np205 to sell ? __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

04-15-2011, 12:49 AM	#23
1979 GMC Sierra Registered User Join Date: Nov 2010 Location: Niagara, Ontario Posts: 268	Re: 81 1 ton 4x4 for parts What condition is the drivers side fuel tank filler neck ? Travis __________________ 1979 GMC Sierra 3/4 ton Camper Special 1976 Chevy Cheyenne 3/4 ton

04-16-2011, 08:47 AM	#24
K30_dump Registered User Join Date: Oct 2007 Location: Pennsylvania Posts: 164	Re: 81 1 ton 4x4 for parts Tom, Any word on the frame? Still looking for rear spring hangers, possibly crossmember... Let me know, thanks!! Joe

10-25-2012, 03:09 PM	#25
Sandemonium Proud owner of a 55.1 AD Join Date: Oct 2006 Location: Desert Hills, AZ Posts: 460	Re: 81 1 ton 4x4 for parts Tom, Is the fuel filler still available? If so, what are you asking for it? Thank you, Bob Posted via Mobile Device

Register or Log In To remove these advertisements.