|
|
|
04-06-2011, 10:02 PM
|
#1 |
|
Registered User
Join Date: Dec 2008
Location: long island new york
Posts: 88
|
Rotors or Axles?
I just finished my front end swap (84 crossmember onto my 65 C10) and here is the dillema im having
Id like to keep my original steel wheels but Im pretty sure they wont fit over the disc brakes. Should I convert the truck to 5 lug or should I get the 6 lug rotors for the front end? What do you guys think?
__________________
86 K20 6" lift 66 C10 LS2 T56 1947 Ford Rat Rod Softail Deluxe Softail Chopper |
|
|
|
04-06-2011, 11:33 PM
|
#2 |
|
Registered User
Join Date: Mar 2011
Location: Arizona
Posts: 124
|
Re: Rotors or Axles?
6 lug rotors
|
|
|
|
|
04-07-2011, 01:23 AM
|
#3 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: Rotors or Axles?
If your 6 lug wheels are the original style 15" wheels for your truck, they won't work with disc brakes. If they are 16" they might work.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
04-07-2011, 11:50 AM
|
#4 |
|
Registered User
Join Date: May 2005
Location: Beaverton, OR
Posts: 3,728
|
Re: Rotors or Axles?
I used some 6 lug ralleys off a 4x4 when I swapped the discs on the front of my '69. The rear lip on the newer steel wheels clears.
Here's a shot from GMC Pauls showing the 15" wheels that will fit the disc front (not the big brakes) 
__________________
New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210 |
|
|
|
|
04-07-2011, 08:35 PM
|
#5 |
|
Senior Enthusiast
Join Date: Feb 2007
Location: Spokane Valley, WA
Posts: 8,356
|
Re: Rotors or Axles?
Here's an earlier thread that may provide some helpful information. Fyi if you do install the 6 lug rotors, the stock wheels "may" fit over the calipers if they are original 5" or 5 1/2" wide rims. Wheels this skinny might fit because the back side of the rim is so shallow. It just depends, some will fit while others won't.
http://67-72chevytrucks.com/vboard/s...c+brake+wheels |
|
|
|
|
04-07-2011, 08:54 PM
|
#6 |
|
HOW long until spring??
Join Date: Mar 2009
Location: Star Idaho
Posts: 1,413
|
Re: Rotors or Axles?
I went for the 6 lug rotors and stayed original when I swapped front crossmembers . My wheels are aluminum aftermarket 15" and they clear the GM calipers nicely. I am running 235/60/15 on a 9" wheel on all four corners..
I put discs on my Chevelle and went through this with the 14" wheels. .... Bolt one up and check it out..
__________________
69 chevelle convertible 71-C-10 short-wide and low  64 C-10 custom shortbox "Bubba"s Recycling project" |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
