|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
03-25-2003, 12:41 AM
|
#1 |
|
So Many Ideas, So Little Money
Join Date: Sep 2001
Location: Marshalltown, IA
Posts: 1,610
|
SBC in th I-6 location
I was just curious howmuch room there is from an HEI dist. to the firewall when you mount it in the I-6 location?
__________________
72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu  Marshalltown, Iowa |
|
|
|
03-25-2003, 12:48 AM
|
#2 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
About enough room to slip a finger tween the cap & firewall(snug). The dist will come out of the eng after you take the cap & rotor off......crazyL
|
|
|
|
|
03-25-2003, 12:52 AM
|
#3 |
|
So Many Ideas, So Little Money
Join Date: Sep 2001
Location: Marshalltown, IA
Posts: 1,610
|
so might be best to "massage" the firewall for alittle mre?
__________________
72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa |
|
|
|
|
03-25-2003, 12:57 AM
|
#4 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
You could work the firewall with a spoon & hammer, but i havent had any problems . My firewall has been notched for the heads when I was running olds & caddy....the spot behind the dist is still stock tho.... crazyL
|
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
