what would yall pay for these? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rr41mag · 04-19-2011, 09:16 PM

Found these in a junk yard today

Joemomma1 · 04-19-2011, 09:47 PM

40
Posted via Mobile Device

AdvantageR1 · 04-19-2011, 10:15 PM

I just bought a pair at a junk yard for $20, but those are in really good shape. They go on ebay for around $70 or so.

Sick5 · 04-19-2011, 10:50 PM

I got 30 lol
Posted via Mobile Device

bigtruckboi2000 · 04-19-2011, 10:57 PM

$70 on ebay? wow thats a lot. I would pay no more than $40 total for both.

**Captainfab** · 04-20-2011, 12:41 AM

Did you get the thin narrow metal clip that was on the cab that holds the rear edge of that trim?

Quote:

Originally Posted by rr41mag

Found these in a junk yard today

old chevy truck · 04-20-2011, 01:06 AM

Hey i have a set on cragslist without the plate they are in good shape.

*lakeroadster* · 04-20-2011, 08:03 AM

I paid $47 for a set.

Classic Parts wants $170 for a set

LMC wants $239 for a set (gouge.... as usual)

65Gregg · 04-20-2011, 09:02 AM

Quote:

Originally Posted by lakeroadster

I paid $47 for a set.

Classic Parts wants $170 for a set

LMC wants $239 for a set (gouge.... as usual)

"FYI: Be sure to price compare before using LMC, they really gouge you on some of their parts.... "

Lakeroadster,I think I'm seeing a pattern here.

gostranger · 04-20-2011, 09:23 AM

i would say 50-60 plus shipping

chad64chevy · 04-20-2011, 09:41 AM

i guess you found a junk yard near texarkana!! i paid 65 for mine and didn't get the metal clip for them! if you have the metal clips you can get more money out of them! goes any people know where i could get the metal clip instead of having to make something to work?? nice find!!

*lakeroadster* · 04-20-2011, 10:12 AM

I didn't have the clip. The trim panels have a formed lip that curls under around their perimeter. We will use pan head stainless sheet metal screws in leu of the clip:

What I did:

Use Scotch blue masking tape to cover the paint on the area where the trim panels contact the cab.
Set the panels on the cab and trace the outline of the panel.
Measure the width of the lip and transfer it to the masking tape.
Measure the diameter of the shank of the screw. I used #10. Take the shank diameter and divide it by 2 and then offset the line in step 3 by that amount.
Drill (2) of the appropriate size holes in the approximate area of where the clip originally went. (see sketch below)
Install the pan head stainless sheet metal screws but back them off such that the formed lip on the trim panel slips snugly under the screw head.
Test fit the panel. Keep adjusting the screws until the panel is snug.
Remove masking tape.
Install remaining OEM fasteners into trim.
Stand back and enjoy.

**N2TRUX** · 04-20-2011, 10:55 AM

Quote:

Originally Posted by lakeroadster

I didn't have the clip. The trim panels have a formed lip that curls under around their perimeter. We will use pan head stainless sheet metal screws in leu of the clip:

What I did:

Use Scotch blue masking tape to cover the paint on the area where the trim panels contact the cab.
Set the panels on the cab and trace the outline of the panel.
Measure the width of the lip and transfer it to the masking tape.
Measure the diameter of the shank of the screw. I used #10. Take the shank diameter and divide it by 2 and then offset the line in step 3 by that amount.
Drill (2) of the appropriate size holes in the approximate area of where the clip originally went. (see sketch below)
Install the pan head stainless sheet metal screws but back them off such that the formed lip on the trim panel slips snugly under the screw head.
Test fit the panel. Keep adjusting the screws until the panel is snug.
Remove masking tape.
Install remaining OEM fasteners into trim.
Stand back and enjoy.

Add some install pics to these and we have another FAQ....

**N2TRUX** · 04-21-2011, 06:21 PM

Quote:

Originally Posted by N2TRUX

Add some install pics to these and we have another FAQ....

This is now an FAQ- LINK

Blue Heeler · 04-20-2011, 10:58 PM

I'll give you 40 pesos and a cold Pacifico?

rr41mag · 04-21-2011, 07:35 AM

I paid 30 for them, the truck I got them from is already being stripped. Its 7 miles south of Texarkana. They have another one that is about completly stripped.

04-19-2011, 09:47 PM	#2
Joemomma1 Registered User Join Date: Mar 2009 Location: CA Posts: 814	Re: what would yall pay for these? 40 Posted via Mobile Device

04-19-2011, 10:15 PM	#3
AdvantageR1 Registered User Join Date: Mar 2011 Location: Oklahoma City, OK Posts: 128	Re: what would yall pay for these? I just bought a pair at a junk yard for $20, but those are in really good shape. They go on ebay for around $70 or so.

04-19-2011, 10:50 PM	#4
Sick5 C10 CLUB Y QUE! Join Date: Mar 2010 Location: Here Posts: 2,770	Re: what would yall pay for these? I got 30 lol Posted via Mobile Device __________________ C/10 CLUB http://67-72chevytrucks.com/vboard/f...play.php?f=148

04-19-2011, 10:57 PM	#5
bigtruckboi2000 Registered User Join Date: Apr 2011 Location: Camp Lejeune, NC Posts: 97	Re: what would yall pay for these? $70 on ebay? wow thats a lot. I would pay no more than $40 total for both.

04-20-2011, 01:06 AM	#7
old chevy truck Registered User Join Date: Feb 2010 Location: Clastkiane Oregon Posts: 127	Re: what would yall pay for these? Hey i have a set on cragslist without the plate they are in good shape. Last edited by N2TRUX; 04-20-2011 at 10:53 AM.

04-19-2011, 09:16 PM	#1
rr41mag Registered User Join Date: Mar 2010 Location: Texarkana Texas Posts: 40	what would yall pay for these? Found these in a junk yard today Attached Images

04-20-2011, 08:03 AM	#8
lakeroadster Account Suspended Join Date: Sep 2009 Location: High Plains of Colorado Posts: 2,485	Re: what would yall pay for these? I paid $47 for a set. Classic Parts wants $170 for a set LMC wants $239 for a set (gouge.... as usual)

04-20-2011, 09:23 AM	#10
gostranger 65 suburban vortec 5.3 bagged Join Date: Jun 2005 Location: upstate new york Posts: 1,317	Re: what would yall pay for these? i would say 50-60 plus shipping

04-20-2011, 09:41 AM	#11
chad64chevy Registered User Join Date: Mar 2011 Location: tulsa,ok. Posts: 1,803	Re: what would yall pay for these? i guess you found a junk yard near texarkana!! i paid 65 for mine and didn't get the metal clip for them! if you have the metal clips you can get more money out of them! goes any people know where i could get the metal clip instead of having to make something to work?? nice find!!

04-20-2011, 10:12 AM	#12
lakeroadster Account Suspended Join Date: Sep 2009 Location: High Plains of Colorado Posts: 2,485	Re: what would yall pay for these? I didn't have the clip. The trim panels have a formed lip that curls under around their perimeter. We will use pan head stainless sheet metal screws in leu of the clip: What I did: Use Scotch blue masking tape to cover the paint on the area where the trim panels contact the cab. Set the panels on the cab and trace the outline of the panel. Measure the width of the lip and transfer it to the masking tape. Measure the diameter of the shank of the screw. I used #10. Take the shank diameter and divide it by 2 and then offset the line in step 3 by that amount. Drill (2) of the appropriate size holes in the approximate area of where the clip originally went. (see sketch below) Install the pan head stainless sheet metal screws but back them off such that the formed lip on the trim panel slips snugly under the screw head. Test fit the panel. Keep adjusting the screws until the panel is snug. Remove masking tape. Install remaining OEM fasteners into trim. Stand back and enjoy. Last edited by lakeroadster; 04-20-2011 at 10:21 AM.

04-20-2011, 10:58 PM	#15
Blue Heeler Registered User Join Date: Dec 2010 Location: Venice, Ca. Posts: 314	Re: what would yall pay for these? I'll give you 40 pesos and a cold Pacifico?

04-21-2011, 07:35 AM	#16
rr41mag Registered User Join Date: Mar 2010 Location: Texarkana Texas Posts: 40	Re: what would yall pay for these? I paid 30 for them, the truck I got them from is already being stripped. Its 7 miles south of Texarkana. They have another one that is about completly stripped.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.