Door Weather Stripping - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Gibber1967 · 04-21-2011, 07:20 PM

Could someone please post a picture of their single wall top to door glass weather stripping where it goes over the drip catcher. I've got new seals and that looks pretty straight forward, but I also have a set of drip catchers to install and I don't want to figure it out the hard way (by doing it wrong the first time). I take it the drip catchers do in first then the stripping goes on top of them. I would use the weather strip glue on the top. and then when I remove it the drip catcher would go stay on the top?

A close up pic. of that area would be great.

I did a search but the only pics I found were not displaying (X).

Thanks,

Gibber

**70cst** · 04-26-2011, 12:06 AM

Bump...

Gibber1967 · 04-28-2011, 05:49 PM

Nice try 70CST. I really thought this would be an easyone for somebody....guess not. Is nobody running the drip catchers? I had them on a previous '72 Jimmy and I thought they worked quite well.

Gibber1967 · 05-04-2011, 10:09 AM

I thought I would take a picture of the area I am talking about. My top is off but I would prefer to see a picture of this area with the top on and the drip catcher installed,,,,,please?

Thanks,

Gibber

BobbyK · 05-04-2011, 11:25 PM

Gibber1967 · 05-05-2011, 12:50 AM

That's what I'm talkin' about!

Thanks BobbyK,

Gibber

**Tom Vogel** · 05-05-2011, 09:00 AM

Wow... I hadnt seen that before. So... everytime you remove your single wall top, you have to thread that aparatus in there and screw it down... or am I just looking at it wrong?
Thanks, Tom

Gibber1967 · 05-05-2011, 10:08 AM

Ya, pretty much. On my last Blazer I just left them attached to the top so I had to put the two screws into the window frame every time I put the top on. Not a big deal really for me since I usually just take my top off in the spring and put it back on in the fall.

BobbyK · 05-05-2011, 11:10 AM

The two screws that thread into the window frame need to be removed before top removale.

NW_Ryker · 05-05-2011, 06:38 PM

Are those deflectors the same for a double wall top? Thats how I have mine set up and it leaks.

BobbyK · 05-06-2011, 01:05 AM

To be honest. I think the tops leaked from the factory.

red71cheyenne · 05-06-2011, 12:04 PM

What kind of weatherstip adhesive are you guys using? I used the black 3M stuff and it only lasted a little while before all my weatherstrip came off. What kind is the best for lasting? Thanks, Jeff.

jer57747 · 05-06-2011, 02:13 PM

Quote:

Originally Posted by red71cheyenne

What kind of weatherstip adhesive are you guys using? I used the black 3M stuff and it only lasted a little while before all my weatherstrip came off. What kind is the best for lasting? Thanks, Jeff.

I have found that the weld wood contack cement beats everything else for ease of use and holding.

**jaros44sr** · 05-06-2011, 03:38 PM

Quote:

Originally Posted by red71cheyenne

What kind of weatherstip adhesive are you guys using? I used the black 3M stuff and it only lasted a little while before all my weatherstrip came off. What kind is the best for lasting? Thanks, Jeff.

are you putting it on both surfaces, letting it tack up, then assembling it? That's the way it was described on My Classic Car...

Bentblazer · 05-06-2011, 04:23 PM

Quote:

Originally Posted by jaros44sr

are you putting it on both surfaces, letting it tack up, then assembling it? That's the way it was described on My Classic Car...

Saw that one too: seem to work good

NW_Ryker · 05-06-2011, 01:51 PM

I used the black loctite kind and the 3m stuff. The loctite seems to hold a little better.
Posted via Mobile Device

04-21-2011, 07:20 PM	#1
Gibber1967 Registered User Join Date: Nov 2009 Location: Shuswap, BC Posts: 152	Door Weather Stripping Could someone please post a picture of their single wall top to door glass weather stripping where it goes over the drip catcher. I've got new seals and that looks pretty straight forward, but I also have a set of drip catchers to install and I don't want to figure it out the hard way (by doing it wrong the first time). I take it the drip catchers do in first then the stripping goes on top of them. I would use the weather strip glue on the top. and then when I remove it the drip catcher would go stay on the top? A close up pic. of that area would be great. I did a search but the only pics I found were not displaying (X). Thanks, Gibber

04-26-2011, 12:06 AM	#2
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: Door Weather Stripping Bump... __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

04-28-2011, 05:49 PM	#3
Gibber1967 Registered User Join Date: Nov 2009 Location: Shuswap, BC Posts: 152	Re: Door Weather Stripping Nice try 70CST. I really thought this would be an easyone for somebody....guess not. Is nobody running the drip catchers? I had them on a previous '72 Jimmy and I thought they worked quite well.

05-04-2011, 10:09 AM	#4
Gibber1967 Registered User Join Date: Nov 2009 Location: Shuswap, BC Posts: 152	Re: Door Weather Stripping I thought I would take a picture of the area I am talking about. My top is off but I would prefer to see a picture of this area with the top on and the drip catcher installed,,,,,please? Thanks, Gibber Attached Images

05-04-2011, 11:25 PM	#5
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,772	Re: Door Weather Stripping __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE

05-05-2011, 12:50 AM	#6
Gibber1967 Registered User Join Date: Nov 2009 Location: Shuswap, BC Posts: 152	Re: Door Weather Stripping That's what I'm talkin' about! Thanks BobbyK, Gibber

05-05-2011, 09:00 AM	#7
Tom Vogel 2WD Jimmy Join Date: Mar 2005 Location: Davis County, Utah Posts: 2,565	Re: Door Weather Stripping Wow... I hadnt seen that before. So... everytime you remove your single wall top, you have to thread that aparatus in there and screw it down... or am I just looking at it wrong? Thanks, Tom

05-05-2011, 10:08 AM	#8
Gibber1967 Registered User Join Date: Nov 2009 Location: Shuswap, BC Posts: 152	Re: Door Weather Stripping Ya, pretty much. On my last Blazer I just left them attached to the top so I had to put the two screws into the window frame every time I put the top on. Not a big deal really for me since I usually just take my top off in the spring and put it back on in the fall.

05-05-2011, 11:10 AM	#9
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,772	Re: Door Weather Stripping The two screws that thread into the window frame need to be removed before top removale. __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE

05-05-2011, 06:38 PM	#10
NW_Ryker Registered User Join Date: Jul 2010 Location: Carnation Wa Posts: 199	Re: Door Weather Stripping Are those deflectors the same for a double wall top? Thats how I have mine set up and it leaks.

05-06-2011, 01:05 AM	#11
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,772	Re: Door Weather Stripping To be honest. I think the tops leaked from the factory. __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE

05-06-2011, 12:04 PM	#12
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: Door Weather Stripping What kind of weatherstip adhesive are you guys using? I used the black 3M stuff and it only lasted a little while before all my weatherstrip came off. What kind is the best for lasting? Thanks, Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

05-06-2011, 01:51 PM	#16
NW_Ryker Registered User Join Date: Jul 2010 Location: Carnation Wa Posts: 199	Re: Door Weather Stripping I used the black loctite kind and the 3m stuff. The loctite seems to hold a little better. Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.