ID help please - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Baggerjohn · 04-23-2011, 10:03 PM

I have a 67 lwb C-10. It has a inline 6 with a 5 speed trans and a 12 bolt rea end. How do I find out what size the engine is, how to id the trans and rear end. I don't know where to look and what to look for. Any help is appreciated. Thank you.

pritch · 04-23-2011, 10:15 PM

A 230/250 will have side covers about 4'' tall, while a 292 they will be closer to 6''. Also, the 292 motor mounts are offset. The right side is like 2'' farther forward than the left.
Hope that helps.

Autoblueprint · 04-23-2011, 10:17 PM

Try these links:

http://stoveboltengineco.com/index.php/tech-tips

You can also call Tom on the phone at Stovebolt.

These might be helpful too :

http://www.inliners.org

http://www.autoblueprint.com/1961_pa...61_apache.html

Baggerjohn · 04-24-2011, 11:41 PM

Thank you Pritch and Autoblueprint for your information. I am convinced it is a 250 ci just want to get the year. I have bookmarked the links that you each sent. Thank you both. Now to find out what trans I have. I know that the 5 speed was not original to my C-10. Thanks again.

**LockDoc** · 04-25-2011, 02:38 PM

-
Here is about the best site I have found for 5 speed trans ID... Well, any truck trans for that matter...

http://www.motivegear.com/tech_info/...nny_guide.html

LockDoc

04-23-2011, 10:03 PM	#1
Baggerjohn Registered User Join Date: Jan 2011 Location: Bullhead City, AZ Posts: 60	ID help please I have a 67 lwb C-10. It has a inline 6 with a 5 speed trans and a 12 bolt rea end. How do I find out what size the engine is, how to id the trans and rear end. I don't know where to look and what to look for. Any help is appreciated. Thank you. __________________ "Arrive, Raise Hell, Create Confusion, Leave".

04-23-2011, 10:15 PM	#2
pritch Registered User Join Date: Mar 2004 Location: Hoytsville, Utah Posts: 3,365	Re: ID help please A 230/250 will have side covers about 4'' tall, while a 292 they will be closer to 6''. Also, the 292 motor mounts are offset. The right side is like 2'' farther forward than the left. Hope that helps. __________________ '68 Panel Project Boogie Chillin' '68 C-10 Ol' Green

04-23-2011, 10:17 PM	#3
Autoblueprint Registered User Join Date: Mar 2011 Location: Los Angeles, CA Posts: 152	Re: ID help please Try these links: http://stoveboltengineco.com/index.php/tech-tips You can also call Tom on the phone at Stovebolt. These might be helpful too : http://www.inliners.org http://www.autoblueprint.com/1961_pa...61_apache.html

04-24-2011, 11:41 PM	#4
Baggerjohn Registered User Join Date: Jan 2011 Location: Bullhead City, AZ Posts: 60	Re: ID help please Thank you Pritch and Autoblueprint for your information. I am convinced it is a 250 ci just want to get the year. I have bookmarked the links that you each sent. Thank you both. Now to find out what trans I have. I know that the 5 speed was not original to my C-10. Thanks again. __________________ "Arrive, Raise Hell, Create Confusion, Leave".

04-25-2011, 02:38 PM	#5
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,897	Re: ID help please - Here is about the best site I have found for 5 speed trans ID... Well, any truck trans for that matter... http://www.motivegear.com/tech_info/...nny_guide.html LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 04-25-2011 at 02:38 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.