Do I have the correct Head Light Buckets?

[jugernot]

I can't seem to get them to line up. The spring seems to be way out of alignment. Any Thoughts or pictures would be great

[Orangetonicclicc]

they look right to me

[weircc]

i have same problem bought new from classic parts of america

[hayhauler71]

your right side bucket is wrong the adjusters should be on top and towards the center of the grill like your left side

[chevytruckluver]

Hi, Jugernot, I was just thinking about asking you for any updates, did you get the e-brake cable figured out?
I just picked up a 68 front clip this w/e, I took the headlight buckets out during disassembly
Looking at you pics I dont see anything diffrent from mine, its dark here now so a pic I cannot take. If you still have questions I will try to take some pics tomorrow afternoon.

[jugernot]

Originally Posted by chevytruckluver

Hi, Jugernot, I was just thinking about asking you for any updates, did you get the e-brake cable figured out?
I just picked up a 68 front clip this w/e, I took the headlight buckets out during disassembly
Looking at you pics I dont see anything diffrent from mine, its dark here now so a pic I cannot take. If you still have questions I will try to take some pics tomorrow afternoon.

No I sure didnt get the intermediate cable figured out. Im not sure whats wrong. I was thinking about ording another intermediate cable to see if that helps. I also thought about taking apart the rear brakes, connecting the cable and then putting the brakes back together.

Pics would be good. What I think I need is pics of where the spring attaches to the bucket.

Thanks


On another note; I went to two auto parts stores today and neither of them carried or could order headlights for my truck.










..

[riche]

This one really has me confused. I thought the left right adjusters were on the inside of each light??? But I am sure if you had a square hole on the inside of the pass. light you would have used it... The one thing I can say for sure is the spring does not go in tab with the little hole. It goes in the slit on the top rim of the basket. Except it looks like one basket has it cut off! If I had to guess you have them swapped???

[jugernot]

I moved the spring from the retaining bezel screw hole. The passenger side bucket has a slit on the top lip, so I moved the spring to that spot. But the drivers side bucket does not have a hole new the spring.


I looked at the classic parts of america web site. For 62-68 chevy trucks it looks like there is one bucket for both sides. The 69-72 buckets are different for each side. Looking at the pictures on the site and my pictures, my drivers side bucket is correct for a 68, but the the one I have on the passenger side is for a 69-72. Can anyone comfirm this?

First pic is for a 62-68. second pic is for 69-71 according to the classic parts of america web site

[jugernot]

Originally Posted by hayhauler71

your right side bucket is wrong the adjusters should be on top and towards the center of the grill like your left side

I think they changde to the set up your describing in the later models. There are no other square holes for the adjusting screw to mount to. The Rad support is different for certain years also.

[bruceman1968]

Looks like your springs are hooked into the wrong spot. There's 3 holes for the headlight retainer ring, and it looks like your springs are hooked into them.

[chevytruckluver]

yes, My 68 headlight bucket does look like the pic of the new one on the left in post #10
I just looked back at the pics you posted of your truck, do you have a 68 on the driver side and a 69 up on the passenger side?

[jugernot]

Originally Posted by chevytruckluver

yes, My 68 headlight bucket does look like the pic of the new one on the left in post #10
I just looked back at the pics you posted of your truck, do you have a 68 on the driver side and a 69 up on the passenger side?

Awesome, Thanks so much for taking the time to help.

Looks like its time to order some new ones.

[NoNeck]

I ran into the exact same problem when restoring the core support on my '68.

I found that both the left and right headlight buckets are THE SAME on the '68's, and different on the later years. When the buckets are installed correctly, the oval cut-out above the larger opening of the bucket should point UP (see photo). This orients the headlight tabs correctly into the bucket, and allows access to the headlight plug and wires.

I found some things that worked really well when replacing the headlight adjusters. In the HELP section at AutoZone, I found that Chrysler Headlight adjuster screws worked in place of the old Chevy screws. I also found that plastic license plate snap-ins worked to replace the old, broken plastic adjusters.

Here are a couple of photos I took just for reference. Nice truck by the way!

NoNeck

[jugernot]

I just ordered some new buckets and Euro headlights from Early Classic and will probably have them by tomorrow.