|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
05-11-2011, 08:28 PM
|
#1 |
|
Registered User
Join Date: Dec 2010
Location: Arkansas
Posts: 608
|
What do you think it will run?
1971 chevrolet SWB (3800 lbs) 325-50-15's
4.10's with 3500 to 4000 converter 350 TH built BBC 433 (Balanced) 049's 2.19/1.88's Gasket matched with intake (Hurricane 3000-7500) Solid roller 264/272 @.050 .680/.683 lift Matching componets (2800-7000) 10.6 CR 2 " tubes with 3.5 collectors MSD system componets. I know alot rides on the suspension. That will be worked too. I am just looking for you thoughts. Last edited by Blue Rat; 05-12-2011 at 07:47 PM. |
|
|
|
05-11-2011, 09:31 PM
|
#2 |
|
Registered User
Join Date: Sep 2010
Location: Canton, GA
Posts: 229
|
Re: What do you think it will run?
If your engine has good forged components, it will love the bottle. We have found that we run faster with lower compression than is traditional for a nitrous engine. On engine only, I would guess low 12's. Paul Baxter
|
|
|
|
|
05-12-2011, 10:58 AM
|
#3 |
|
Registered User
Join Date: Mar 2011
Location: Oak Ridge NC
Posts: 957
|
Re: What do you think it will run?
I'm going to be a hair more optimistic than kpeztruck and say you might hit mid 11's. It really depends on traction, air quality and how well your setup works together. Have you had it dyno'd?
|
|
|
|
|
05-12-2011, 12:06 PM
|
#4 |
|
Registered User
Join Date: Oct 2006
Location: bridgecreek ok.
Posts: 1,214
|
Re: What do you think it will run?
doesn't sound to much different than mine.
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81 |
|
|
|
|
05-12-2011, 12:29 PM
|
#5 |
|
On a budget like Fred Sanford
Join Date: Oct 2005
Location: Topeka, KS
Posts: 2,031
|
Re: What do you think it will run?
Reverse split cam huh? Any particular reason?
I'd say if you get some decent air, it should mph in the 114-116 range. I'd say in a big truck that's good for high elevens if you can sixty foot the thing. Bottom 12s for sure though.
__________________
'85 Silverado swb: 383 stroker, 10.5:1, vortec heads, 232/238 roller cam, RPM air gap, performer 750 carb, stainless longtubes, 3" duals/super 44's, T56/4.11 383ci build / exterior refresh thread '98 Camaro z28: 370ci twin turbo 370ci build '01 Tahoe LT 4x4: 5.3, longtubes/ory, magnaflow duals, custom tune....wife's DD |
|
|
|
|
05-12-2011, 07:17 PM
|
#6 |
|
Registered User
Join Date: Dec 2010
Location: Arkansas
Posts: 608
|
Re: What do you think it will run?
[QUOTE=swb85;4676354]Reverse split cam huh? Any particular reason?/QUOTE]
Let me get the cam spec card out an get the info from the card. |
|
|
|
|
05-12-2011, 07:42 PM
|
#7 |
|
Registered User
Join Date: Dec 2010
Location: Arkansas
Posts: 608
|
Re: What do you think it will run?
It is not together right now. But, do have all the major parts. The heads will be done in the next couple weeks. The pockets in the heads are being worked a little. The block is done. All I have to do is get it balanced an start putting it together. Forged pistons, Callies rods an GM forged steel crank. Engine should be together in about month an half. Here is the cam specs. Thanks for the comments. I had a chevelle with a little less engine than what this is an of course it was lighter it ran 11.60's. I am trying to at least match that time with this combo. I will keep making changes till I get it where I think it is doing its best it is going to do.
264 @ .050 .680 272 @ .050 .683 EXH. 4/7 swap. I am considering Nitrous but I do not know anything about tuning it. Any directions from someone that runs it would be appreciated. You can pm me or lead me in a good direction. Last edited by Blue Rat; 05-12-2011 at 07:54 PM. |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
