|
05-14-2011, 11:14 AM | #1 |
Addicted to Rust
Join Date: Dec 2009
Location: Abbeville SC
Posts: 1,030
|
No Cruise!
Its an 01 DBW 5.3 I have power in all places but the Resume\Accel wire. The TCC and brake signal also check out. I checked at the TAC module plugg and the PCM plug. Any ideas or do I have a fragged TAC? Jay
__________________
Current trucks: (48 GMC100 320 inliner) Gone (48 Suburban in pieces) Sold 87 GMC CCSB 5.3 4l60E Daily Driver ECTA National record holder XO/PP We never really grow up, we just learn how to act in public. |
05-16-2011, 07:58 AM | #2 |
Registered User
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,119
|
Re: No Cruise!
What is this in? You said that the brake switch checked out, but did you check the brake light bulbs? The cruise has to see the resistance of at least one bulb at start up for it to work, which is usually the third brake light, but in conversions will be the regular brake lights, which is why you can't run just LED brake lights. Are you using LEDbrake lights?
Posted via Mobile Device |
05-16-2011, 10:48 PM | #3 |
Addicted to Rust
Join Date: Dec 2009
Location: Abbeville SC
Posts: 1,030
|
Re: No Cruise!
Its in my 87 Gitmo. The bulbs are good. Although the feed is wired through a relay. So it may not be seeing ground. I will check it.. Jay
__________________
Current trucks: (48 GMC100 320 inliner) Gone (48 Suburban in pieces) Sold 87 GMC CCSB 5.3 4l60E Daily Driver ECTA National record holder XO/PP We never really grow up, we just learn how to act in public. |
Bookmarks |
|
|