|
|
|
04-04-2001, 12:29 PM
|
#1 |
|
Registered User
Join Date: Jun 2000
Location: Greenville, TX,
Posts: 29
|
hitch wanted
Looking for an inexpensive hidden hitch to install on my 87 behind the roll pan. Doesn't need to be anything nice, just needs to be hidden. Truck is too low for any type of drop hitch.
Thanks
__________________
1987 SWB Silverado, EFI 350 w/700R4, lowered 5/7 with 17" Impalas on BFG rubber. |
|
|
|
04-05-2001, 09:29 AM
|
#2 |
|
Registered User
Join Date: Mar 2001
Location: Fargo, ND, USA (Currently in Rockford, IL)
Posts: 79
|
I don't know exactly what your looking for, but I built a hidden receiver hitch for my '80. It took a little time, but it only costs about $20 for metal. If you do that type of thing, it might not be a bad idea to build your own.
------------------ '80 Chevy Cheyenne 1/2 350 4bbl.
__________________
'80 Chevy Cheyenne Big 10 350 4bbl. Daily driver '67 lwb project currently in the planning stage |
|
|
|
|
04-05-2001, 10:31 AM
|
#3 |
|
Registered User
Join Date: Jun 2000
Location: Greenville, TX,
Posts: 29
|
Thanks, I appreciate the info.
__________________
1987 SWB Silverado, EFI 350 w/700R4, lowered 5/7 with 17" Impalas on BFG rubber. |
|
|
|
|
04-05-2001, 11:31 AM
|
#4 |
|
BAD BOW-Silverado XST
Join Date: May 2000
Location: Senior Member from Austin, TX
Posts: 6,431
|
I have the same problem. Hidden hitches for our trucks are harder to find. If I don't find one I like I'm having one custom built. My brother has a friend who made one and welded it to the frame. I making a pull out bar for mine. I've been rearend twice already. Each time I've had to replace the tailgate, tailgate skin and the reverse handle. The roll pan has been straightened out since its welded into the body on the ends. My lowered truck sits just right where a full size truck will hit the bed sill plate and only slightly damage the tailgate to warrant a replacement. The pull out bar will only be used on heavy traffic days and bad weather days. It will be 16 inch wide and stick out about three to four inches behind the roll pan. If I can find a sticker for it I want to say "Go ahead, make my day!" No more damage to my truck but the unfortunate rearender may have to tow his vehicle.
------------------ Gerardo 1983 Custom Truck TX Plates: "BAD BOW" http://www.geocities.com/abetterchemist/ |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
