![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Got 20's????
Join Date: Oct 2001
Location: Aberdeen SD
Posts: 1,451
|
Chevelle Headers for our trucks #68608
I found a set, but they don't come with collectors. They are at $157 now. Would I be able to use standard 3" collectors that you can pick up at parts stores?
__________________
99 Silverado Ex-Cab 2wd, Bagged&WhippleCharged 02 Sierra Ex-Cab 4wd 2500 HD The 72 went down the road. |
![]() |
![]() |
![]() |
#2 |
So Many Ideas, So Little Money
Join Date: Sep 2001
Location: Marshalltown, IA
Posts: 1,610
|
yout mean collector extentions? if it i a 3" collector any off the shelf extention will bolt on
__________________
72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu ![]() Marshalltown, Iowa |
![]() |
![]() |
![]() |
#3 |
440 american Horses
Join Date: Mar 2001
Location: Anoka, MN USA
Posts: 470
|
Will headers for a big block Chevelle fit the 67-72 trucks with a big block also? Thanks
__________________
Seth Petro 1969 Chev Short Step 425hp 350, TH400, big tires, fast truck 1979 Pontiac Trans Am 1991 Saturn SL1 - gas mileage! (and free) 1977 Buick LeSabre - for sale May America bless God, and may God bless America ![]() |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jul 2001
Location: North Delta, British Columbia
Posts: 1,344
|
Yes, big block headers will fit. I used the 3/4 length chevelled headers on my truck. The drivers side fits well (have to use a smaller height oil filter though) and the passenger side header fits ok (had to grind the frame about 3/4" to for header to sit properly). These headers dump right in line with the frame rail. 2wd pickup.
__________________
1992 Gmc 2wd 1972 Chevy Blazer 2wd |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Dec 2001
Location: NW Iowa
Posts: 952
|
I have Hooker Chevelle BB headers from Summit and they fit fine. On my '67 it took a little grinding on lower part of frame rail on left side to give adequate cleareance. I'm running a M-20 4 speed and clutch linkage took a little engineering but it will work. Headers hang 2 - 3 inches below frame rail.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|