2007 Battery load module - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tk-mpl · 05-28-2011, 11:35 PM

I just noticed that my alt is not charging... It had the battery load module thing on the battery cable originally. I did not have that to put it in. Will the PCM not just turn the alt on when it sees a drop in voltage?? Can you tune the PCM to charge it normally with out this module??

Thanx
Trevor

usmcchevy · 05-29-2011, 12:05 PM

67C10BUB is the only person I can think of that has used it. Maybe he knows. Good luck

http://67-72chevytrucks.com/vboard/s...=421326&page=4

BustedTruck · 05-29-2011, 09:43 PM

First off what is your engine out of? Typicaly if the battery current sensor fails the pcm or ecm commands a default voltage of approximately 14volts. I have an 05 tahoe engine & left it off with no problems. The battery current sensor is connected to the pcm on my 05 tahoe & depending on what your engine is out of, may be connected to the bcm. You should be able to just leave it off. I would double check your connections first.

tk-mpl · 05-29-2011, 10:06 PM

It. Is out of a 2007 tahoe RPO LMG.
Posted via Mobile Device

05-28-2011, 11:35 PM	#1
tk-mpl Registered User Join Date: Jan 2008 Location: Lacombe, Alberta Posts: 353	2007 Battery load module I just noticed that my alt is not charging... It had the battery load module thing on the battery cable originally. I did not have that to put it in. Will the PCM not just turn the alt on when it sees a drop in voltage?? Can you tune the PCM to charge it normally with out this module?? Thanx Trevor __________________ 1968 short box stepside. 2007 5.3L 4L60, tuned w/EFI Live 2005 Silverado bucket seats. Dominator 2600's all around. Porterbuilt tubular control arms. Magnaflow 3" dual exhaust.

05-29-2011, 12:05 PM	#2
usmcchevy Has more rust than truck... Join Date: Apr 2005 Location: Ivanhoe, MN Posts: 2,421	Re: 2007 Battery load module 67C10BUB is the only person I can think of that has used it. Maybe he knows. Good luck http://67-72chevytrucks.com/vboard/s...=421326&page=4 __________________ 1972 Custom/10 SWB, 4.8/4l80e Build thread LSx Swap FAQ index

05-29-2011, 09:43 PM	#3
BustedTruck Registered User Join Date: Dec 2006 Location: Braselton, GA Posts: 245	Re: 2007 Battery load module First off what is your engine out of? Typicaly if the battery current sensor fails the pcm or ecm commands a default voltage of approximately 14volts. I have an 05 tahoe engine & left it off with no problems. The battery current sensor is connected to the pcm on my 05 tahoe & depending on what your engine is out of, may be connected to the bcm. You should be able to just leave it off. I would double check your connections first.

05-29-2011, 10:06 PM	#4
tk-mpl Registered User Join Date: Jan 2008 Location: Lacombe, Alberta Posts: 353	Re: 2007 Battery load module It. Is out of a 2007 tahoe RPO LMG. Posted via Mobile Device __________________ 1968 short box stepside. 2007 5.3L 4L60, tuned w/EFI Live 2005 Silverado bucket seats. Dominator 2600's all around. Porterbuilt tubular control arms. Magnaflow 3" dual exhaust.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.