|
|
|
03-31-2003, 02:01 AM
|
#1 |
|
king $h!t
Join Date: Jan 2002
Location: spring valley/ohio/usa
Posts: 416
|
clean up time
how would u guys clean up a hella dirty carb. ive used carb cleaner it works on the inside not the outside. this carb has had mud and water muck all kinda $h!t on it.
 
__________________
j dawg the 86 allmost done 357/700r4/lifted 9/dana44 front ten bolt rear/3.73 gears/35s |
|
|
|
03-31-2003, 02:14 AM
|
#2 |
|
Registered User
Join Date: Oct 2002
Location: Edmond, OK
Posts: 5,904
|
take it apart and dip it! get some heavy duty degreaser.. i get higly concentrated cleaner from work and use i to clean things... we use something called Dip-It.. not sure what it might do to a carb...
__________________
Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call |
|
|
|
|
03-31-2003, 02:26 AM
|
#3 |
|
king $h!t
Join Date: Jan 2002
Location: spring valley/ohio/usa
Posts: 416
|
well i kninda didnt want to take it aprt could i dip it with pulling it a part
__________________
j dawg the 86 allmost done 357/700r4/lifted 9/dana44 front ten bolt rear/3.73 gears/35s |
|
|
|
|
03-31-2003, 03:16 AM
|
#4 |
|
Registered User
Join Date: Oct 2002
Location: Edmond, OK
Posts: 5,904
|
depends on what you are using.. some solvents might eat things... like gaskets...
__________________
Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call |
|
|
|
|
03-31-2003, 03:26 AM
|
#5 |
|
king $h!t
Join Date: Jan 2002
Location: spring valley/ohio/usa
Posts: 416
|
well maybe i will stick to what i was doing. carb cleaner and a tooth brush. i cleaned on spot looked to good to stay dirty
__________________
j dawg the 86 allmost done 357/700r4/lifted 9/dana44 front ten bolt rear/3.73 gears/35s |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
