turning traction control and stabilitrak off - The 1947 - Present Chevrolet & GMC Truck Message Board Network

timcrow00 · 07-20-2011, 08:15 AM

i got a '11 scsb 4.8l with 3.42 gears. ive tried holding the button till it says they are both turned off but it still wont spin the tires on pavement but with 300hp in as small of truck as i have it shouldnt be a problem. If im on a dirt road i can spin the tires but if i do it too much or fishtale at all it shuts down and wont let me have any fun. if i buy a tune will it make this truck any more fun to drive?

Doug_J · 07-20-2011, 11:59 AM

well you do have a 4.8 an I didnt think they were rated at 300 hp or maybe they are but its at the flywheel an by the time it gets to the tires its more like 265 guessing. But yes you can wake it up a lot with a programmer but I'd send your computer out an do like a blackbear tune or take it somewhere to have them tune it better option to me because your gonna get way more out of it that way then with a handheld one.

timcrow00 · 07-20-2011, 08:47 PM

the 4.8 is rated at 302hp and 305tq. and with 3.42 gears and it wont even chirp the tires on pavement. does the computer take the timing out at low rpms? what im getting at is a tune will prolly give like 20 more hp but if the tune helps do away with something that is holding the power back then it would really increase power

Doug_J · 07-20-2011, 09:03 PM

I think theirs people getting way more than 20hp out of a tune but I could be wrong. A good place to check out for more info on that tuning is gmfullsize.com theirs a lot of them on their that have done it but they’re not very helpful like on here. I’m not very familiar with the 4.8 but I’d say it likes the higher rpms more than off the line, I drove a 4.8 4wd then drove my truck I have now with the 5.3 4wd and that 4.8 didn’t have anything on the 5.3 it was a dog but like i said they was both ccsb 4wds. Now in a rcsb it’s lighter so that 4.8 may move it along pretty good but I just don’t think it’s going to be a monster or anything.

**LEEVON** · 07-20-2011, 10:11 PM

It's not the stabilitrak and traction control, it's the torque management programmed in the computer. It retards the timing so you don't tear up the drivetrain. Get a tune (not a handheld) and tear up all the tires you wish.

timcrow00 · 07-21-2011, 03:25 AM

That's what I was lookin for. I knew there had to be holding it back. Looks like I tune is in my future!
Posted via Mobile Device

piecesparts · 07-22-2011, 10:15 AM

I have had this guy tune my 09 Pontiac G8 and when I got the GMC truck, he did an upgrade to it also. He does a lot of GM computer stuff (gas or diesel) and will build you a wiring harness for a computer for a lot less than the market has them. He is big into 6.0 liter engines and installing them into older vehicles. Talk to him and see if you would be interested in what he does. He works out at Forbes field during the week, but has every other Friday off and his weekends are usually available.

However, if I were going to go to Texas, I think I would go down to Patrick G's place and let them have their way with the computer. http://guerragroup.com/LSXDYNO.htm

piecesparts · 07-22-2011, 10:28 PM

It did not affect my mileage, I was getting 19 MPG with mixed driving, already. I see the fuel economy computer kick up numbers like 23 and 24 MPG at times, but I have not put the truck on the highway for a really long trip to see if it performs that way. I have seen 21+ on just highway driving from my home to Wichita, but I can't keep the foot out of the pedal. As for numbers, I am not running this at the track, so I don't have numbers. The shift is very crisp and the acceleration is great. The top speed cut off is NO LONGER at 98 MPH---we put a one in front of the 98 and there is no problem passing the old fuel cut off speed. This hot summer heat is not helping a lot either.

Doug_J · 07-23-2011, 12:32 PM

Quote:

Originally Posted by piecesparts

It did not affect my mileage, I was getting 19 MPG with mixed driving, already. I see the fuel economy computer kick up numbers like 23 and 24 MPG at times, but I have not put the truck on the highway for a really long trip to see if it performs that way. I have seen 21+ on just highway driving from my home to Wichita, but I can't keep the foot out of the pedal. As for numbers, I am not running this at the track, so I don't have numbers. The shift is very crisp and the acceleration is great. The top speed cut off is NO LONGER at 98 MPH---we put a one in front of the 98 and there is no problem passing the old fuel cut off speed. This hot summer heat is not helping a lot either.

Well for numbers I really was asking what you thought you had on HP and TQ.

Doug_J · 07-24-2011, 08:53 PM

So what do you think of the 4.8 in that rcsb? does it move along pretty good or wish you woulda got that 5.3?

07-20-2011, 08:15 AM	#1
timcrow00 Registered User Join Date: Mar 2009 Location: mulvane, KS Posts: 200	turning traction control and stabilitrak off i got a '11 scsb 4.8l with 3.42 gears. ive tried holding the button till it says they are both turned off but it still wont spin the tires on pavement but with 300hp in as small of truck as i have it shouldnt be a problem. If im on a dirt road i can spin the tires but if i do it too much or fishtale at all it shuts down and wont let me have any fun. if i buy a tune will it make this truck any more fun to drive?

07-20-2011, 11:59 AM	#2
Doug_J Registered User Join Date: Apr 2009 Location: Moore,OK Posts: 178	Re: turning traction control and stabilitrak off well you do have a 4.8 an I didnt think they were rated at 300 hp or maybe they are but its at the flywheel an by the time it gets to the tires its more like 265 guessing. But yes you can wake it up a lot with a programmer but I'd send your computer out an do like a blackbear tune or take it somewhere to have them tune it better option to me because your gonna get way more out of it that way then with a handheld one.

07-20-2011, 08:47 PM	#3
timcrow00 Registered User Join Date: Mar 2009 Location: mulvane, KS Posts: 200	Re: turning traction control and stabilitrak off the 4.8 is rated at 302hp and 305tq. and with 3.42 gears and it wont even chirp the tires on pavement. does the computer take the timing out at low rpms? what im getting at is a tune will prolly give like 20 more hp but if the tune helps do away with something that is holding the power back then it would really increase power

07-20-2011, 09:03 PM	#4
Doug_J Registered User Join Date: Apr 2009 Location: Moore,OK Posts: 178	Re: turning traction control and stabilitrak off I think theirs people getting way more than 20hp out of a tune but I could be wrong. A good place to check out for more info on that tuning is gmfullsize.com theirs a lot of them on their that have done it but they’re not very helpful like on here. I’m not very familiar with the 4.8 but I’d say it likes the higher rpms more than off the line, I drove a 4.8 4wd then drove my truck I have now with the 5.3 4wd and that 4.8 didn’t have anything on the 5.3 it was a dog but like i said they was both ccsb 4wds. Now in a rcsb it’s lighter so that 4.8 may move it along pretty good but I just don’t think it’s going to be a monster or anything.

07-20-2011, 10:11 PM	#5
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,888	Re: turning traction control and stabilitrak off It's not the stabilitrak and traction control, it's the torque management programmed in the computer. It retards the timing so you don't tear up the drivetrain. Get a tune (not a handheld) and tear up all the tires you wish. __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids

07-21-2011, 03:25 AM	#6
timcrow00 Registered User Join Date: Mar 2009 Location: mulvane, KS Posts: 200	Re: turning traction control and stabilitrak off That's what I was lookin for. I knew there had to be holding it back. Looks like I tune is in my future! Posted via Mobile Device

07-22-2011, 10:15 AM	#7
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: turning traction control and stabilitrak off I have had this guy tune my 09 Pontiac G8 and when I got the GMC truck, he did an upgrade to it also. He does a lot of GM computer stuff (gas or diesel) and will build you a wiring harness for a computer for a lot less than the market has them. He is big into 6.0 liter engines and installing them into older vehicles. Talk to him and see if you would be interested in what he does. He works out at Forbes field during the week, but has every other Friday off and his weekends are usually available. However, if I were going to go to Texas, I think I would go down to Patrick G's place and let them have their way with the computer. http://guerragroup.com/LSXDYNO.htm __________________ Frank

07-22-2011, 10:28 PM	#8
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: turning traction control and stabilitrak off It did not affect my mileage, I was getting 19 MPG with mixed driving, already. I see the fuel economy computer kick up numbers like 23 and 24 MPG at times, but I have not put the truck on the highway for a really long trip to see if it performs that way. I have seen 21+ on just highway driving from my home to Wichita, but I can't keep the foot out of the pedal. As for numbers, I am not running this at the track, so I don't have numbers. The shift is very crisp and the acceleration is great. The top speed cut off is NO LONGER at 98 MPH---we put a one in front of the 98 and there is no problem passing the old fuel cut off speed. This hot summer heat is not helping a lot either. __________________ Frank

07-24-2011, 08:53 PM	#10
Doug_J Registered User Join Date: Apr 2009 Location: Moore,OK Posts: 178	Re: turning traction control and stabilitrak off So what do you think of the 4.8 in that rcsb? does it move along pretty good or wish you woulda got that 5.3?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.