1987 power steering pump pix please!!!

[mannyb.]

hey guys,

i need your help. I have a 1987 power steering setup that im going to be putting into my truck. the motor is a 1pc rms so the should correspond but im having a hell of a time trying to figure out how to line it up. im thinking im missing another bracket? the pump i have has three mounting spots. facing the motor from the front of the truck, they are: 1 hole on the top left, 1 hole on the right side middle, and the sliding hole on the bottom left.

my question is, is there another bracket that i need, or is it just the one in between the canister and pulley? i know im not going to use the hole on the right side because i have headers.

and like the title says, if you have any pix of your pump, they would help!!! i cant even find anything on google!!!

THANKS AHEAD
manny

[mannyb.]

anyone? this the bracket that i have now... i tried to mock it up, but it seems like i may need a couple of spacers? can anyone confirm that or know what the extra brackets(if there are some) look like.

[motornut]

doubt the 87 pic will help too far but the 88 might
thinkin may be AC bracket missing for you or that little piece like the jimmy
but they do use i'd call em spacers,thick washers?a tube the bolt goes threw?

[SS Delux]

Not to hijack the thread but does anyoone have a pic of a 4.3L V6 with power steering ? converting over and just need to see if I have all the parts.

[mannyb.]

thanks motornut!

but sh*t. mine is a little different than that? the slider is on the bottom left?? BUT that spacer on the top bolt looks rite. can you measure the distance of that please!! it looks pretty close to 1/2" i guess????

thanks for the pix though! do you happen to have a picture or know the length of the spacer for the bottom left mounting hole?

[motornut]

Sorry not close to the trucks ,sold that 87 block a while back
Posted via Mobile Device

[mannyb.]

k, thakns for the pix though!