rear cab mount ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

CdM · 08-21-2011, 02:12 PM

Just saw these http://*******************/-63-87-ful...hassis-mount-3 and wondering if they will work on my 66 c20. It had the old s brackets with the rubber in the middle before. If they wont work.. any ideas on where to find some is much appreciated.

**Captainfab** · 08-22-2011, 12:28 AM

Those won't work. The '67-'72 mounts are slightly different than the '63-'66's.
You can get your original ones rebuilt from Steel Rubber. A former member here, Tony Smith makes repro's for the '63-'66's, but I'm not sure how to get in touch with him.

Quote:

Originally Posted by CdM

Just saw these http://*******************/-63-87-ful...hassis-mount-3 and wondering if they will work on my 66 c20. It had the old s brackets with the rubber in the middle before. If they wont work.. any ideas on where to find some is much appreciated.

CdM · 08-22-2011, 11:06 AM

id rather go with the solid mounts. guess im in for a fab job. oh well
Thanks capt

chevy_mike · 08-22-2011, 11:28 AM

Quote:

Originally Posted by CdM

id rather go with the solid mounts. guess im in for a fab job. oh well
Thanks capt

Not sure if you are referencing those mounts that you posted or some home grown solid mounts but the ones in the link you posted still use a rubber bushing between the cab and mount. These do not bolt directly to the cab.

**Clyde65** · 08-22-2011, 11:27 AM

there is probably someone on the forum that has these on a parts truck that you could get. put in the WTB and or the parts WTB section

CdM · 08-28-2011, 01:48 PM

Oh no im talking about the c20 custom camper mounts with the rubber that runs vertical. They suck and r expensive to repair. Im looking for the style that has a rubber cab mount like the ones above.

Thanks Clyde, Ill give that a shot.

Mechanic77 · 08-28-2011, 02:58 PM

Just an fyi, if you get the c10 rear cab mounts and brackets, they'll bolt right on.....surely someone has an extra set of frame brackets you could pick up....

I discovered this on my truck, which started as a c20 and I robbed some rear cab frame brackets off of a '65 truck bed trailer I picked up....hardest part is getting the rivets off, all the holes are in the same location

CdM · 09-03-2011, 07:48 PM

yeah those rivets are definitely well set. Thanks for the info. I'll look around before building a set.

Camper Special · 09-03-2011, 09:00 PM

I bought a set for my c20 from Tony, they were well made and fit great. He can be found over on Stovebolt.com.

j.kirn · 09-03-2011, 09:44 PM

OR his new website on facebook 4-5-6 chevy trucks

shrunken66stroker · 09-04-2011, 01:58 AM

Quote:

Originally Posted by Camper Special

I bought a set for my c20 from Tony, they were well made and fit great. He can be found over on Stovebolt.com.

Out of curiosity, what happened to Tony? I've bought a few parts from him and benefited from some of his posts.

Camper Special · 09-04-2011, 07:51 AM

I'm not sure, but I believe banned/suspended sometime within the last year or so?

jonzcustomshop · 09-05-2011, 10:01 AM

here is a set on ebay:http://cgi.ebay.com/ebaymotors/1965-...item2c5eee052d

LostMy65 · 11-26-2011, 02:16 PM

I decided to buy them after all.

http://www.ebay.com/itm/1965-Chevy-t...0&cmd=ViewItem

dthela · 11-26-2011, 05:26 PM

i could check my 60 parts burb, they might be good

LostMy65 · 11-27-2011, 01:32 AM

I also bought new rubber mounts from classic parts:
http://www.classicparts.com/prodinfo...141&variation=

08-21-2011, 02:12 PM	#1
CdM Registered User Join Date: May 2011 Location: Oceano,CA Posts: 157	rear cab mount ? Just saw these http://*******************/-63-87-ful...hassis-mount-3 and wondering if they will work on my 66 c20. It had the old s brackets with the rubber in the middle before. If they wont work.. any ideas on where to find some is much appreciated. __________________ Build Thread 66 custom cab lwb http://67-72chevytrucks.com/vboard/s...d.php?t=465726 66 fleet lwb- In process 64 k10 10inch lift 38.5's- In process 92k1500 400hp on 38.5-parts truck now 8(

08-22-2011, 11:06 AM	#3
CdM Registered User Join Date: May 2011 Location: Oceano,CA Posts: 157	Re: rear cab mount ? id rather go with the solid mounts. guess im in for a fab job. oh well Thanks capt __________________ Build Thread 66 custom cab lwb http://67-72chevytrucks.com/vboard/s...d.php?t=465726 66 fleet lwb- In process 64 k10 10inch lift 38.5's- In process 92k1500 400hp on 38.5-parts truck now 8(

08-22-2011, 11:27 AM	#5
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: rear cab mount ? there is probably someone on the forum that has these on a parts truck that you could get. put in the WTB and or the parts WTB section __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

08-28-2011, 01:48 PM	#6
CdM Registered User Join Date: May 2011 Location: Oceano,CA Posts: 157	Re: rear cab mount ? Oh no im talking about the c20 custom camper mounts with the rubber that runs vertical. They suck and r expensive to repair. Im looking for the style that has a rubber cab mount like the ones above. Thanks Clyde, Ill give that a shot. __________________ Build Thread 66 custom cab lwb http://67-72chevytrucks.com/vboard/s...d.php?t=465726 66 fleet lwb- In process 64 k10 10inch lift 38.5's- In process 92k1500 400hp on 38.5-parts truck now 8(

08-28-2011, 02:58 PM	#7
Mechanic77 Registered User Join Date: Nov 2010 Location: Burrton, KS Posts: 215	Re: rear cab mount ? Just an fyi, if you get the c10 rear cab mounts and brackets, they'll bolt right on.....surely someone has an extra set of frame brackets you could pick up.... I discovered this on my truck, which started as a c20 and I robbed some rear cab frame brackets off of a '65 truck bed trailer I picked up....hardest part is getting the rivets off, all the holes are in the same location __________________ Pro Touring 1964 C10-Under Construction http://67-72chevytrucks.com/vboard/s...d.php?t=441627 Project '65 Short Step Daily Driver http://67-72chevytrucks.com/vboard/s...d.php?t=661948

09-03-2011, 07:48 PM	#8
CdM Registered User Join Date: May 2011 Location: Oceano,CA Posts: 157	Re: rear cab mount ? yeah those rivets are definitely well set. Thanks for the info. I'll look around before building a set. __________________ Build Thread 66 custom cab lwb http://67-72chevytrucks.com/vboard/s...d.php?t=465726 66 fleet lwb- In process 64 k10 10inch lift 38.5's- In process 92k1500 400hp on 38.5-parts truck now 8(

09-03-2011, 09:00 PM	#9
Camper Special Registered User Join Date: May 2010 Location: Tarentum, PA. Posts: 22	Re: rear cab mount ? I bought a set for my c20 from Tony, they were well made and fit great. He can be found over on Stovebolt.com.

09-03-2011, 09:44 PM	#10
j.kirn Registered User Join Date: Jun 2006 Location: MO. Posts: 970	Re: rear cab mount ? OR his new website on facebook 4-5-6 chevy trucks

09-04-2011, 07:51 AM	#12
Camper Special Registered User Join Date: May 2010 Location: Tarentum, PA. Posts: 22	Re: rear cab mount ? I'm not sure, but I believe banned/suspended sometime within the last year or so?

09-05-2011, 10:01 AM	#13
jonzcustomshop 1961 crewcab Join Date: Dec 2007 Location: missoula, mt Posts: 6,164	Re: rear cab mount ? here is a set on ebay:http://cgi.ebay.com/ebaymotors/1965-...item2c5eee052d __________________ 60 build: http://67-72chevytrucks.com/vboard/s...d.php?t=280904 61 crew build: http://67-72chevytrucks.com/vboard/s...d.php?t=646830 63 build: http://67-72chevytrucks.com/vboard/s...d.php?t=336537 64 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=448681 65 'burb build: http://67-72chevytrucks.com/vboard/s...d.php?t=590715 65 build: http://67-72chevytrucks.com/vboard/s...d.php?t=281955

11-26-2011, 02:16 PM	#14
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: rear cab mount ? I decided to buy them after all. http://www.ebay.com/itm/1965-Chevy-t...0&cmd=ViewItem __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035

11-26-2011, 05:26 PM	#15
dthela Registered User Join Date: Jul 2011 Location: N Kingstown, R.I. Posts: 305	Re: rear cab mount ? i could check my 60 parts burb, they might be good

11-27-2011, 01:32 AM	#16
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,530	Re: rear cab mount ? I also bought new rubber mounts from classic parts: http://www.classicparts.com/prodinfo...141&variation= __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.