CA 1990 GMC Serria for Resto or Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DT1 · 08-25-2011, 11:33 AM

I'm selling my 1990 GMC Sierra C2500 80K miles. The Engine, entire wiring harness, and fuel pump have been removed and are not available.
Was a California County Vehicle with only 80,000 miles. No rust or dents. Just a few minor dings. Nice set of tires. Hood and grill are in the bed.
Registered NonOp June 2011. Clear Title in hand.
I'll sell the entire truck for $600.00 OBO or will part out anything but the vehicle must remain a rolling chassis. The buyer of the entire truck must transfer title.

For my project I need a BellHousing to connect the 1990 SBC Gen I to an NV4500, Flywheel, Clutch, PressPlate, Hydraulic TO, Master Cylinder.
I have the 95 bellhousing and slave cylinder but would like to eliminate the bump by the starter and go internal with the hydraulics.

DT1 · 08-30-2011, 06:09 PM

Bump
If anyone is interested, the price is now $300.00 OBO.

**special-K** · 08-31-2011, 06:57 PM

Can I buy two of the center caps with plastic lugs? Or,all four of you'd rather? My zip code is 21771. I wish I could buy that whole thing.

DT1 · 09-01-2011, 10:07 AM

Quote:

Originally Posted by special-K

Can I buy two of the center caps with plastic lugs? Or,all four of you'd rather? My zip code is 21771. I wish I could buy that whole thing.

Make me an offer.

**special-K** · 09-01-2011, 11:38 AM

$30 shipped? I really only need two.

54Caddy · 09-06-2011, 11:52 PM

interior shots? where in cali are you?

DT1 · 09-09-2011, 02:52 PM

Quote:

Originally Posted by 54Caddy

interior shots? where in cali are you?

I don't have any interior shots right now but I can get some.
I'm in Lancaster, 160 miles south of you.

dishow · 09-12-2011, 10:50 AM

would be interested in interior pics also.looking for a couple items in tan.looks like it may have tan inside.

DT1 · 09-12-2011, 11:09 AM

Interior Shots...

dishow · 09-13-2011, 01:22 PM

how much shipped (18853)for
1. center dash piece with vents and the delete cubby hole for cassette
2. fuse box cover

if good shape with nothing broke im intersested. thanks.

DT1 · 09-20-2011, 10:06 AM

Quote:

Originally Posted by dishow

how much shipped (18853)for
1. center dash piece with vents and the delete cubby hole for cassette
2. fuse box cover

if good shape with nothing broke im intersested. thanks.

Sorry it took so long to get back to you. Here's the dash piece. The fuse cover is in the same condition. I know postage is always a factor, so You'll have to give me some more time to box, measure and way it so I can get an accurate shipping price.

DT1 · 09-20-2011, 11:21 AM

Quote:

Originally Posted by dishow

how much shipped (18853)for
1. center dash piece with vents and the delete cubby hole for cassette
2. fuse box cover

if good shape with nothing broke im intersested. thanks.

The best estimate is USPS Flat Rate $14.95

dishow · 09-21-2011, 08:56 AM

Quote:

Originally Posted by DT1

The best estimate is USPS Flat Rate $14.95

ok,but what is the price for the items?shipping price is fair.
please let me know.thanks.

rsmarr1982 · 10-13-2011, 02:05 PM

still have driver door?

lha1992 · 09-18-2011, 02:20 AM

Do you have a pic of the glove box door?

Might be interested in it. Shipping to 98204

Thanks!

DT1 · 09-20-2011, 11:28 AM

Quote:

Originally Posted by lha1992

Do you have a pic of the glove box door?

Might be interested in it. Shipping to 98204

Thanks!

The shipping USPS is $13.00 + - $1.00

**Tim Christian** · 09-20-2011, 08:52 PM

Is the dash cluster(speedo) for sale ? Auto or Manual? Thanks

Kurt L · 10-13-2011, 04:37 PM

do you have all four speakers? and do they work?

08-25-2011, 11:33 AM	#1
DT1 Registered User Join Date: Oct 2009 Location: Gardnerville Nv No Mo Cali!! Posts: 869	1990 GMC Serria for Resto or Parts I'm selling my 1990 GMC Sierra C2500 80K miles. The Engine, entire wiring harness, and fuel pump have been removed and are not available. Was a California County Vehicle with only 80,000 miles. No rust or dents. Just a few minor dings. Nice set of tires. Hood and grill are in the bed. Registered NonOp June 2011. Clear Title in hand. I'll sell the entire truck for $600.00 OBO or will part out anything but the vehicle must remain a rolling chassis. The buyer of the entire truck must transfer title. For my project I need a BellHousing to connect the 1990 SBC Gen I to an NV4500, Flywheel, Clutch, PressPlate, Hydraulic TO, Master Cylinder. I have the 95 bellhousing and slave cylinder but would like to eliminate the bump by the starter and go internal with the hydraulics.

08-30-2011, 06:09 PM	#2
DT1 Registered User Join Date: Oct 2009 Location: Gardnerville Nv No Mo Cali!! Posts: 869	Re: 1990 GMC Serria for Resto or Parts Bump If anyone is interested, the price is now $300.00 OBO.

08-31-2011, 06:57 PM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 1990 GMC Serria for Resto or Parts Can I buy two of the center caps with plastic lugs? Or,all four of you'd rather? My zip code is 21771. I wish I could buy that whole thing. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 09-01-2011 at 06:23 AM.

09-01-2011, 11:38 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 1990 GMC Serria for Resto or Parts $30 shipped? I really only need two. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-06-2011, 11:52 PM	#6
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,294	Re: 1990 GMC Serria for Resto or Parts interior shots? where in cali are you? __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

09-12-2011, 10:50 AM	#8
dishow Registered User Join Date: Nov 2006 Location: pa. Posts: 1,185	Re: 1990 GMC Serria for Resto or Parts would be interested in interior pics also.looking for a couple items in tan.looks like it may have tan inside. __________________ 67 chevy c 10 2x4 350/700r4 short/fleet 90 Chevy 1500 4x4 350/5 spd short/fleet 90 Chevy 454 ss 93 chevy camaro z28 auto t-tops 2013 Chevy Silverado LT CCSB 4x4

09-12-2011, 11:09 AM	#9
DT1 Registered User Join Date: Oct 2009 Location: Gardnerville Nv No Mo Cali!! Posts: 869	Re: 1990 GMC Serria for Resto or Parts Interior Shots...

09-13-2011, 01:22 PM	#10
dishow Registered User Join Date: Nov 2006 Location: pa. Posts: 1,185	Re: 1990 GMC Serria for Resto or Parts how much shipped (18853)for 1. center dash piece with vents and the delete cubby hole for cassette 2. fuse box cover if good shape with nothing broke im intersested. thanks. __________________ 67 chevy c 10 2x4 350/700r4 short/fleet 90 Chevy 1500 4x4 350/5 spd short/fleet 90 Chevy 454 ss 93 chevy camaro z28 auto t-tops 2013 Chevy Silverado LT CCSB 4x4 Last edited by dishow; 09-13-2011 at 01:22 PM. Reason: add info

10-13-2011, 02:05 PM	#14
rsmarr1982 Registered User Join Date: Jul 2010 Location: mogadore ohio Posts: 867	Re: 1990 GMC Serria for Resto or Parts still have driver door? __________________ 1969 chevy c10 lwb stepside 250 6 3 ott 1971 chevy c10 lwb 250 6 with power steering 3 ott 1972 chevy k20 4x4 350/TH350 automatic 1978 chevy Malibu 4dr 305 2bbl (all original) 1979 chevy k10 Scottsdale 350/th350 full-time 4wd(daily driver)

09-18-2011, 02:20 AM	#15
lha1992 Registered User Join Date: Apr 2010 Location: Everett, WA Posts: 504	Re: 1990 GMC Serria for Resto or Parts Do you have a pic of the glove box door? Might be interested in it. Shipping to 98204 Thanks!

09-20-2011, 08:52 PM	#17
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	Re: 1990 GMC Serria for Resto or Parts Is the dash cluster(speedo) for sale ? Auto or Manual? Thanks

10-13-2011, 04:37 PM	#18
Kurt L Senior Member Join Date: May 2003 Location: ne florida Posts: 2,665	Re: 1990 GMC Serria for Resto or Parts do you have all four speakers? and do they work?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.