TN Parting 1990 Reg cab longbed. 109553 act.miles 305 5spd

[70BLAZERX2]

Take i look...nice maroon interior...I bought this for the 5speed trans..was told motor was rattleing...valve covers were off..and full of sludge..

But the bench seat is very nice.. $75 local pickup
Has a maroon rubber floormat $100 shipped.(only due to size of box to ship it)
Radio...with cassette with equilizer $75 shipped for all 3..radio unit(under dash,radio head..and the aux unit in the middle. SOLD

Nice mint maroon dash...will look super in that 454SS truck $200 complete.

mags $100 all 4 no tires. I will ship wheels for $20 a wheel.

Fenders $50 each..no rust..nice fenders.SOLD

88-93 stock gm grille that is in good driver shape..no peeling..no cracks..$50 local pickup.. 37745 zip SOLD

If you see anything i may have missed..let me know.

please reply here 1st...then pm..so we all know who is in line..Thank you.Erick

[70BLAZERX2]

[70BLAZERX2]

Motor has a severe rod knock...almost ready to come loose..out the side..its that bad

Radio woks just fine..all lites are woring on it,tape deck works and equilzer works too..sounds great!!

They never changed the oil in it..its full of sludge..so its ready to come apart..

Heater control works great too..does have a/c but not the "max" button like my 94
no recerculat on the a/c Must be a 88-90 thing..

[rsmarr1982]

how much to ship both fenders to 44314?

[70BLAZERX2]

Originally Posted by rsmarr1982

how much to ship both fenders to 44314?

complete front clip sold local today for $150,thanks for asking..

it would be to much to ship them. they are oversized.

[benoit454]

noth mirrors in good shape? if so cost?

also clutch and brake pedals? maybe clutch master and slave with lines and brackets etc. included for what cost?

[70BLAZERX2]

Originally Posted by benoit454

noth mirrors in good shape? if so cost?

also clutch and brake pedals? maybe clutch master and slave with lines and brackets etc. included for what cost?

all i have are a set of black mirrors just like the ones on the truck..$35 shipped

or i can get the new 96-up manual mirrors for $85 a pair shipped

[lha1992]

How much for the AC condensor? Shipping to 98204.

My '89 silverado was just in a front end wreck recently and the force of the impact tore up my bumper, brackets, radiator core is bent plus the condensor. Like the hood core support made an imprint on the condensor.

Thanks!

[70BLAZERX2]

Originally Posted by lha1992

How much for the AC condensor? Shipping to 98204.

My '89 silverado was just in a front end wreck recently and the force of the impact tore up my bumper, brackets, radiator core is bent plus the condensor. Like the hood core support made an imprint on the condensor.

Thanks!

I have a few of those..removed from trucks with working a/c

$60 shipped..only due to size..$25 for the cond. and $35 for shipping it to you..on the west coast...LOL way out there..just let me know

could you look at your and conform if your orfice tube is in the condensor at the lower line..the newer ones are in the bottom under the reciever/drier.

just to make sure you get the right one.

[benoit454]

ok I'll pass then on the mirrors but what kinda cost on the clutch pedal setup and extra parts?

[70BLAZERX2]

Originally Posted by benoit454

ok I'll pass then on the mirrors but what kinda cost on the clutch pedal setup and extra parts?

I will have to see..the clutch pedal setup is on hold right now..I am putting the 5speed trans in my 70 2wd blazer..And am going to use it for a mock-up only..may be for sale at a later date.

those are hard to find these days..not many trucks were manual.Thanks

[mrdana60]

how much for rear bumper ?

[70BLAZERX2]

Originally Posted by mrdana60

how much for rear bumper ?

back bumper was all dented up and it was junked..

I get there in all the time..if i get another i will post another add..Thank you

[mrdana60]

Originally Posted by 70BLAZERX2

back bumper was all dented up and it was junked..

I get there in all the time..if i get another i will post another add..Thank you

dang that bumper in the pic looked great compared to my bumper. lol i m rough on my truck. that would ve been fine for me. mine has be hit by a honda, and warped by pulling a fallen oak tree lol.

[bigboi]

when you do your 5 speed swap what will you take for the 4 speed trans ,shifter, linkage

[jaros44sr]

Am looking for a speedometer for a 1989 GMC 1500 series pickup

[70BLAZERX2]

Originally Posted by bigboi

when you do your 5 speed swap what will you take for the 4 speed trans ,shifter, linkage

Its a muncie M21 out of a 67 GTO ,been rebuilt a few years ago..Needs nothing,ready to go in.. The sncro's have been modified..so it is setup for 1/4 mile ,flat shift up or down...yes down.. without and noise..its awesome..I just want the overdrive for cruising now.

$800 for the trans...$200 for the 2 year old hurst shifter..I only put around 3,000 miles on the blazer over the last 10 years.. It dont get out much but it will be out soon..

$1,000 total and i can get it to asheville nc or so..let me know.

[benoit454]

not a prob. but considering swapping my 88 k1500 to 5 spd.

[70BLAZERX2]

I may get another truck in a week or two.....Just have to buy one more to take apart..

[gr8one]

how much for the serpentine setup shipped to 33841 i only need the brakets

[70BLAZERX2]

Originally Posted by gr8one

how much for the serpentine setup shipped to 33841 i only need the brakets

I have several setups here

if you just need the alt/ps bracket and the a/c bracket $75 shipped


complete setup,brackets with a/c comp,alt,ps pump,fan,pullies,bolts..$200 shipped

[gr8one]

Originally Posted by 70BLAZERX2

I have several setups here

if you just need the alt/ps bracket and the a/c bracket $75 shipped


complete setup,brackets with a/c comp,alt,ps pump,fan,pullies,bolts..$200 shipped

do they come with the idle pullies can you send pics to ffnels@aol.com, shipping to 33841 i looking for the following casting numbers 10118701 (driver's side) and 10118751 (passenger side).

[bigboi]

let me see if i can line up enough ducks

[70BLAZERX2]

Originally Posted by bigboi

let me see if i can line up enough ducks

no problem..just let me know..

Jaros44sr speedometer is going out this afternoon..Thank you

[chinquipin]

Still have the seat? If so What kind of shape is it in?