Removing muh grill - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**michael bustamante** · 09-04-2011, 03:31 PM

How do I remove the grill and headlight doors on my 84 Blazer? I removed the torque head screws but the headlight doors seem to attatched above the lowbeams.
Posted via Mobile Device

flamingbig10 · 09-04-2011, 03:46 PM

The head light door there's two under the low beams or park lights and two on the core support, the grille there's 5 at the core support and one behind each head light doors

Walts_restoration · 09-04-2011, 07:48 PM

Quote:

Originally Posted by flamingbig10

The head light door there's two under the low beams or park lights and two on the core support, the grille there's 5 at the core support and one behind each head light doors

And one under neath off of the hood latch, 8 in total. Should only be 4 screws on each headlight door for an 81-88 style, unless the single headlights are different than dual.

**michael bustamante** · 09-06-2011, 10:00 AM

WELL i FOUND ALL THE SCREWS YOU GUYS WERE TALKING ABOUT. COME TO FIND OUT THE GRILL HAD BUSTED TABS AND ONLY TWO SCREWS HOLDING IT IN AND SOME CREATIVE BAILING WIRE!! i PUT IN SOME SILVERSTAR HEADLIGHTS AND A RELAY KIT FOR THE HEADLIGHTS......BIG DIFFERENCE!. THANKS FOR YOUR HELP GUYS

09-04-2011, 03:31 PM	#1
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Removing muh grill How do I remove the grill and headlight doors on my 84 Blazer? I removed the torque head screws but the headlight doors seem to attatched above the lowbeams. Posted via Mobile Device __________________ 1967custom

09-04-2011, 03:46 PM	#2
flamingbig10 6.0 powered square Join Date: Feb 2008 Location: Mesquite texas Posts: 3,459	Re: Removing muh grill The head light door there's two under the low beams or park lights and two on the core support, the grille there's 5 at the core support and one behind each head light doors __________________ Aaron 1980 c-10 short bed lowered, cammed 6.0, 4l80e 3600 stall, smp tune, wilwoods, and flames best time so far best et 7.86 @87 on motor 7.57 90 on a 75 shot Build http://67-72chevytrucks.com/vboard/s...d.php?t=283326

09-06-2011, 10:00 AM	#4
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: Removing muh grill WELL i FOUND ALL THE SCREWS YOU GUYS WERE TALKING ABOUT. COME TO FIND OUT THE GRILL HAD BUSTED TABS AND ONLY TWO SCREWS HOLDING IT IN AND SOME CREATIVE BAILING WIRE!! i PUT IN SOME SILVERSTAR HEADLIGHTS AND A RELAY KIT FOR THE HEADLIGHTS......BIG DIFFERENCE!. THANKS FOR YOUR HELP GUYS __________________ 1967custom



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.