CA WTB 1963 Longbed C10 OEM Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sighlurr · 09-06-2011, 12:39 AM

I just picked up a '63 longbed that needs a little help with some OEM parts. Please send me a PM, or text or call 925 979.8161 and let me know what you have. Shipping will be to 94596 and I prefer PayPal.

1. Drivers door top trim piece. Looking for something to match the original molding; I do not want new. I need a driver condition OEM piece.

2. Passenger longbed upper trim piece. Same as above - driver condition.

3. Uncut original radio panel. Previous owner installed an aftermarket CD player, so I need to weld in an original section of the dash. I need to have the complete recessed rectangle as shown.

4. Cab sails, custom cab panels. Driver condition and need the 1960-1963, not the '64+.

5. Pair of black sub visors. Please no rips or tears..

Thanks!

64 1964 65 1965 66 1966 1960 61 1961 62 1962 1963

Slow Build · 09-06-2011, 04:59 PM

This one is in a dismantler yard in Brentwood. I'll check the trim pieces tomorrow if you'ld like. I take it your looking for straight but weathered trim. I also have some sail panels should work for you. Let me look into it and I'll get back to you.

sighlurr · 09-06-2011, 06:39 PM

That's great - thanks for your help!

It's about time you and I meet up in person anyways...

Quote:

Originally Posted by Slow Build

This one is in a dismantler yard in Brentwood. I'll check the trim pieces tomorrow if you'ld like. I take it your looking for straight but weathered trim. I also have some sail panels should work for you. Let me look into it and I'll get back to you.

Posted via Mobile Device

Slow Build · 09-07-2011, 05:14 PM

All the door trim was shot. Good passenger side upper bed trim ( a few very small dings). I also have the 60-63 custom sail panels (could use a good cleaning). I'd like $80 for the three pieces. Get back to me if that works for you.

sighlurr · 09-07-2011, 05:20 PM

Quote:

Originally Posted by Slow Build

All the door trim was shot. Good passenger side upper bed trim ( a few very small dings). I also have the 60-63 custom sail panels (could use a good cleaning). I'd like $80 for the three pieces. Get back to me if that works for you.

I like it. There isn't any rust on the sail panels, right? I think it's just a reflection in the picture.

PM me your paypal and I'll get you the money today, or I can drop off cash when I come through your area this Sunday, 9/11.

Thanks for your help!
-Devin

Slow Build · 09-07-2011, 11:23 PM

I took them outside for better light. No rust on the front, a little surface rust on the back, some of that transfer from the metal strip that holds the back of the sails down. One has some sap or something of that sort on the back.

Slow Build · 09-08-2011, 12:29 AM

PM sent.

sighlurr · 09-08-2011, 01:38 AM

Slow Build took care of me on the sail panels and bed trim.

I still need the door trim and a radio section that's clean (original, uncut holes) from the dash...

Thanks guys!

old chevy truck · 09-08-2011, 02:44 AM

I have a wide door peace for $ 20 i can send you a pic of it tommarrow

sighlurr · 09-08-2011, 03:51 AM

Yes, if it's the top trim piece - please do.

Quote:

Originally Posted by old chevy truck

I have a wide door peace for $ 20 i can send you a pic of it tommarrow

Posted via Mobile Device

old chevy truck · 09-08-2011, 12:42 PM

can you send me your e-mail so i can send you a pic thanks. randy66chevy@yahoo.com

sighlurr · 09-08-2011, 12:57 PM

Just emailed you...

Quote:

Originally Posted by old chevy truck

can you send me your e-mail so i can send you a pic thanks. randy66chevy@yahoo.com

sighlurr · 09-09-2011, 01:57 AM

I have everything now but the dash section.

Does anyone feel like breaking out their Sawsall?

old chevy truck · 09-09-2011, 02:05 AM

ya i would if you had a 64-66 chevy i have one . Imay know where to find one .i will let you know tommarrow .

sighlurr · 09-09-2011, 03:25 PM

Thanks for meeting up today Rich (Slow Build)! Sorry I was running late.

Slow Build · 09-09-2011, 11:39 PM

Quote:

Originally Posted by dsigh

Sorry I was running late.

No worries. I got there about 2 minutes before you pulled up.
It was good to meet you.

**Bugeyev8** · 09-13-2011, 02:15 AM

I have the factory radio to fill the hole in the dash !! local too !

09-06-2011, 12:39 AM	#1
sighlurr ______________ Join Date: Sep 2006 Location: Danville, CA Posts: 1,285	WTB 1963 Longbed C10 OEM Parts I just picked up a '63 longbed that needs a little help with some OEM parts. Please send me a PM, or text or call 925 979.8161 and let me know what you have. Shipping will be to 94596 and I prefer PayPal. 1. Drivers door top trim piece. Looking for something to match the original molding; I do not want new. I need a driver condition OEM piece. 2. Passenger longbed upper trim piece. Same as above - driver condition. 3. Uncut original radio panel. Previous owner installed an aftermarket CD player, so I need to weld in an original section of the dash. I need to have the complete recessed rectangle as shown. 4. Cab sails, custom cab panels. Driver condition and need the 1960-1963, not the '64+. 5. Pair of black sub visors. Please no rips or tears.. Thanks! 64 1964 65 1965 66 1966 1960 61 1961 62 1962 1963 Attached Images Last edited by sighlurr; 09-06-2011 at 01:41 AM.

09-06-2011, 04:59 PM	#2
Slow Build Registered User Join Date: Sep 2009 Location: California Delta Posts: 2,163	Re: WTB 1963 Longbed C10 OEM Parts This one is in a dismantler yard in Brentwood. I'll check the trim pieces tomorrow if you'ld like. I take it your looking for straight but weathered trim. I also have some sail panels should work for you. Let me look into it and I'll get back to you. Attached Images __________________ Name: Rich Current Ride: 1964 C-10 Short Fleetside Daily Driver: 2005 GMC crew cab short fleetside /2001 Chevy Tahoe Past GM Trucks: 1959 GMC short stepside 1968 GMC short stepside-4x4 1973 Chevy short stepside 1989 Chevy short fleetside-reg cab 1993 Chevy short fleetside-Xcab 2002 Chevy short fleetside-Xcab Save the dinosaurs, use synthetic oil.

09-07-2011, 05:14 PM	#4
Slow Build Registered User Join Date: Sep 2009 Location: California Delta Posts: 2,163	Re: WTB 1963 Longbed C10 OEM Parts All the door trim was shot. Good passenger side upper bed trim ( a few very small dings). I also have the 60-63 custom sail panels (could use a good cleaning). I'd like $80 for the three pieces. Get back to me if that works for you. Attached Images __________________ Name: Rich Current Ride: 1964 C-10 Short Fleetside Daily Driver: 2005 GMC crew cab short fleetside /2001 Chevy Tahoe Past GM Trucks: 1959 GMC short stepside 1968 GMC short stepside-4x4 1973 Chevy short stepside 1989 Chevy short fleetside-reg cab 1993 Chevy short fleetside-Xcab 2002 Chevy short fleetside-Xcab Save the dinosaurs, use synthetic oil.

09-07-2011, 11:23 PM	#6
Slow Build Registered User Join Date: Sep 2009 Location: California Delta Posts: 2,163	Re: WTB 1963 Longbed C10 OEM Parts I took them outside for better light. No rust on the front, a little surface rust on the back, some of that transfer from the metal strip that holds the back of the sails down. One has some sap or something of that sort on the back. Attached Images __________________ Name: Rich Current Ride: 1964 C-10 Short Fleetside Daily Driver: 2005 GMC crew cab short fleetside /2001 Chevy Tahoe Past GM Trucks: 1959 GMC short stepside 1968 GMC short stepside-4x4 1973 Chevy short stepside 1989 Chevy short fleetside-reg cab 1993 Chevy short fleetside-Xcab 2002 Chevy short fleetside-Xcab Save the dinosaurs, use synthetic oil.

09-08-2011, 12:29 AM	#7
Slow Build Registered User Join Date: Sep 2009 Location: California Delta Posts: 2,163	Re: WTB 1963 Longbed C10 OEM Parts PM sent. __________________ Name: Rich Current Ride: 1964 C-10 Short Fleetside Daily Driver: 2005 GMC crew cab short fleetside /2001 Chevy Tahoe Past GM Trucks: 1959 GMC short stepside 1968 GMC short stepside-4x4 1973 Chevy short stepside 1989 Chevy short fleetside-reg cab 1993 Chevy short fleetside-Xcab 2002 Chevy short fleetside-Xcab Save the dinosaurs, use synthetic oil.

09-08-2011, 01:38 AM	#8
sighlurr ______________ Join Date: Sep 2006 Location: Danville, CA Posts: 1,285	Re: WTB 1963 Longbed C10 OEM Parts Slow Build took care of me on the sail panels and bed trim. I still need the door trim and a radio section that's clean (original, uncut holes) from the dash... Thanks guys!

09-08-2011, 02:44 AM	#9
old chevy truck Registered User Join Date: Feb 2010 Location: Clastkiane Oregon Posts: 127	Re: WTB 1963 Longbed C10 OEM Parts I have a wide door peace for $ 20 i can send you a pic of it tommarrow

09-08-2011, 12:42 PM	#11
old chevy truck Registered User Join Date: Feb 2010 Location: Clastkiane Oregon Posts: 127	Re: WTB 1963 Longbed C10 OEM Parts can you send me your e-mail so i can send you a pic thanks. randy66chevy@yahoo.com

09-09-2011, 01:57 AM	#13
sighlurr ______________ Join Date: Sep 2006 Location: Danville, CA Posts: 1,285	Re: WTB 1963 Longbed C10 OEM Parts I have everything now but the dash section. Does anyone feel like breaking out their Sawsall?

09-09-2011, 02:05 AM	#14
old chevy truck Registered User Join Date: Feb 2010 Location: Clastkiane Oregon Posts: 127	Re: WTB 1963 Longbed C10 OEM Parts ya i would if you had a 64-66 chevy i have one . Imay know where to find one .i will let you know tommarrow .

09-09-2011, 03:25 PM	#15
sighlurr ______________ Join Date: Sep 2006 Location: Danville, CA Posts: 1,285	Re: WTB 1963 Longbed C10 OEM Parts Thanks for meeting up today Rich (Slow Build)! Sorry I was running late.

09-13-2011, 02:15 AM	#17
Bugeyev8 Senior Member Join Date: Aug 2009 Location: San Leandro, Ca 94577 Posts: 854	Re: WTB 1963 Longbed C10 OEM Parts I have the factory radio to fill the hole in the dash !! local too !



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.