Motor mounts sold out....now what??

[burlapen]

After a moderate amount of research I decided on the ECE mounts for my 5.3 swap. I went by to pick them up today and they informed me a portion of the mount is made in house and a portion is sourced from GM. GM has discontinued making there half!!!! So, I am wondering what my next best option is as far as mounts. I would like to retain my AC compressor in the stock location if possible. All of this is on my 63 C10 by the way. What mounts are everyone else having luck with? Just a heads up, Im not a great fabricator or welder so something bolt in would be preferred. Thanks!!

[ZR2RICK]

iv'e got a new pair of ece prothane mounts i'm not going to use maybe they would work for you. they are 2-3/8" between the ears,2-3/4" tall.

[HavinSomeFun]

Originally Posted by ZR2RICK

iv'e got a new pair of ece prothane mounts i'm not going to use maybe they would work for you. they are 2-3/8" between the ears,2-3/4" tall.

If he can't use them I might be interested in them...

[short-t]

Originally Posted by ZR2RICK

iv'e got a new pair of ece prothane mounts i'm not going to use maybe they would work for you. they are 2-3/8" between the ears,2-3/4" tall.

Sorry, those are not LS engine mounts. LS engine mounts use four bolts to mount to the block, those are sbc mounts!
Posted via Mobile Device

[ZR2RICK]

they are LS mounts, I had them mounted to plates that adapt to the LM7 I have. I have a set of small block Chevy mounts i can show you if you like.

[short-t]

Originally Posted by ZR2RICK

they are LS mounts, I had them mounted to plates that adapt to the LM7 I have. I have a set of small block Chevy mounts i can show you if you like.

Need I say more?
Posted via Mobile Device
Posted via Mobile Device

[BR3W CITY]

I don't run a/c so I'm not sure if this will work;
I just used the standard cheap swap plates, stock mounts and stock 6 cylinder perches. Moved the perches to the front hole, and welded the mounts in place to be secure. You don't HAVE to weld them, some grade 8 hardware would work fine as well.

[lolife99]

Originally Posted by burlapen

After a moderate amount of research I decided on the ECE mounts for my 5.3 swap. I went by to pick them up today and they informed me a portion of the mount is made in house and a portion is sourced from GM. GM has discontinued making there half!!!! So, I am wondering what my next best option is as far as mounts. I would like to retain my AC compressor in the stock location if possible. All of this is on my 63 C10 by the way. What mounts are everyone else having luck with? Just a heads up, Im not a great fabricator or welder so something bolt in would be preferred. Thanks!!

I thought the "GM half" was just the frame stands from a 73-87 truck?
I would veriify that from ECE and just use a used set of frame stands.

[Shon]

I have been looking at dirtydingo for motor mounts, they offer adjustable ones that look really cool.

I used stock motor mounts with transdapt plates on the motor....

[burlapen]

Thanks for the replies everyone! Rick, are those LS style mounts? It looks like from the picture they have the regular small block on one side but I'm confused where the forked side goes. Lolife, I believe you are correct, I may see if I can stir up some frame brackets and ask if they will sell me the top "half" only. Shon, are you happy with the trans dapt mounts and where your engine sits fore and aft?

[Shon]

Originally Posted by burlapen

Shon, are you happy with the trans dapt mounts and where your engine sits fore and aft?

heck yeah!
I used the stock style mounts (poly replacement) thinking it would be a 'cheaper' route and wanted to show people that you do not have to get the 'high dollar' stuff. but in the end its within a few bucks, slightly cheaper and works but do like the ECE set up. Just wanted to be different.

[ZR2RICK]

they are Ls mounts, I have 1969 Camaro frame stands, the forked part mounts to the frame stands of your choosing, lots of guys make their own.

[Vandals909]

So this is a bummer, ECE no longer sells there Ls conversion kit?

Thanks!

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

[exploderjim]

I just bought the kit from ECE last week. I would call and check.

http://www.earlyclassic.com/catalog....ry=New%20Items