IN NEEDED:cheap black plastic door panels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HeavyMetalChevy · 10-13-2011, 12:48 AM

These must not have deep scratches or scrapes... If faded I got secret magic tricks... Just reply any thing black plastic panels..

Thank ya'

scotts72heavyhalf · 10-13-2011, 12:55 AM

I have a set of pretty good blue ones, if you want to pait them, or I could paint the with SMS satin black for you, I did mine and they look new?

HeavyMetalChevy · 10-13-2011, 01:43 AM

Quote:

Originally Posted by scotts72heavyhalf

I have a set of pretty good blue ones, if you want to pait them, or I could paint the with SMS satin black for you, I did mine and they look new?

Scott...glad we are on the same page again...pics? and what product is SMS??? Just curious and hows it hold up (durability) and/or compare to authentic quality???

scotts72heavyhalf · 10-13-2011, 03:22 PM

SMS is sold here in Oregon by Industrial finishes, I did my 72 in Black including the blue arm rests and that was 3 years ago and they still look great, I did them in gloss, I think it matched the dash pad the best. Its really all about the prep, was with mild soap and water, (remove the chrome trim first) SMS also sells a pre-paint plastic conditioner I used and spray away. Here is a pic of the before and after, the black one does not have the trim installed. I`ll take $30.00 for my blue ones unpainted, the paint is $14.99 a can here and I would not paint the before shipping unless they were really packaged well.

scotts72heavyhalf · 10-14-2011, 01:10 AM

All boxed up and ready to ship to you, did you get my PM?

HeavyMetalChevy · 10-14-2011, 01:25 AM

Quote:

Originally Posted by scotts72heavyhalf

All boxed up and ready to ship to you, did you get my PM?

I understand the price mistake but that is a huge difference in price....If u want that then I want $40 for the driver saddle belt retractor!!! lol just kidding...I will have to consider it...Here is the pic of the retractor though.

HeavyMetalChevy · 10-16-2011, 07:51 AM

Lmk

teeitup · 10-16-2011, 11:25 AM

Duane, here is what I have only the first one has NO extra holes, 2nd pic is another one extra holes, 3rd pic is of some of holes

teeitup · 10-16-2011, 11:26 AM

this is the another one extra holes 1st pic

teeitup · 10-16-2011, 11:29 AM

then there is this one, extra holes, chip in lower right corner and holes where handles are are wollared out some

teeitup · 10-16-2011, 11:30 AM

4 total panels

HeavyMetalChevy · 10-16-2011, 11:36 AM

Quote:

Originally Posted by teeitup

4 total panels

i will take the one pass. with no holes and the two drivers.. .The last one the chip kills it and esp the crank parts... Let me know ship for 3 panels. Also I will get with you on the wiper sets....I want all 17 sets prob. just trying to come up with reasonable and fair number... Thanks

teeitup · 10-16-2011, 02:13 PM

here are some others I have

teeitup · 10-16-2011, 02:14 PM

last 2

HeavyMetalChevy · 10-16-2011, 02:39 PM

Quote:

Originally Posted by teeitup

last 2

he last two are the "deluxe" model just need chrome trim correct. I will also take that pair...

HeavyMetalChevy · 10-16-2011, 02:45 PM

The blue ones as well more than likely...but they have crappy paint job huh??? no worries there just noticed....So I need blue pair...black deluxe pair and the first three blck you showed me def. not the the chipped one though...

Thanks Randy...you're the man... also wipers....those 4 pair of strikers..and all complete TRICO wipers...

10-13-2011, 12:48 AM	#1
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	NEEDED:cheap black plastic door panels These must not have deep scratches or scrapes... If faded I got secret magic tricks... Just reply any thing black plastic panels.. Thank ya' __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

10-13-2011, 12:55 AM	#2
scotts72heavyhalf Registered User Join Date: Aug 2007 Location: Sandy, Oregon Posts: 1,551	Re: NEEDED:cheap black plastic door panels I have a set of pretty good blue ones, if you want to pait them, or I could paint the with SMS satin black for you, I did mine and they look new? __________________ Scotts72C10

10-13-2011, 03:22 PM	#4
scotts72heavyhalf Registered User Join Date: Aug 2007 Location: Sandy, Oregon Posts: 1,551	Re: NEEDED:cheap black plastic door panels SMS is sold here in Oregon by Industrial finishes, I did my 72 in Black including the blue arm rests and that was 3 years ago and they still look great, I did them in gloss, I think it matched the dash pad the best. Its really all about the prep, was with mild soap and water, (remove the chrome trim first) SMS also sells a pre-paint plastic conditioner I used and spray away. Here is a pic of the before and after, the black one does not have the trim installed. I`ll take $30.00 for my blue ones unpainted, the paint is $14.99 a can here and I would not paint the before shipping unless they were really packaged well. Attached Images __________________ Scotts72C10

10-14-2011, 01:10 AM	#5
scotts72heavyhalf Registered User Join Date: Aug 2007 Location: Sandy, Oregon Posts: 1,551	Re: NEEDED:cheap black plastic door panels All boxed up and ready to ship to you, did you get my PM? __________________ Scotts72C10

10-16-2011, 07:51 AM	#7
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: NEEDED:cheap black plastic door panels Lmk __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

10-16-2011, 11:25 AM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: NEEDED:cheap black plastic door panels Duane, here is what I have only the first one has NO extra holes, 2nd pic is another one extra holes, 3rd pic is of some of holes Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-16-2011, 11:26 AM	#9
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: NEEDED:cheap black plastic door panels this is the another one extra holes 1st pic Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-16-2011, 11:29 AM	#10
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: NEEDED:cheap black plastic door panels then there is this one, extra holes, chip in lower right corner and holes where handles are are wollared out some Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-16-2011, 11:30 AM	#11
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: NEEDED:cheap black plastic door panels 4 total panels __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-16-2011, 02:13 PM	#13
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: NEEDED:cheap black plastic door panels here are some others I have Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-16-2011, 02:14 PM	#14
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: NEEDED:cheap black plastic door panels last 2 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-16-2011, 02:45 PM	#16
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: NEEDED:cheap black plastic door panels The blue ones as well more than likely...but they have crappy paint job huh??? no worries there just noticed....So I need blue pair...black deluxe pair and the first three blck you showed me def. not the the chipped one though... Thanks Randy...you're the man... also wipers....those 4 pair of strikers..and all complete TRICO wipers... __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.