Long Tube Headers for '73-'87 LSX Swap

[shenk10]

I know there are a couple of threads already on this, but they are hard to follow so I was hoping someone would chime in on this. I'm looking for long tube headers for '73-'87 trucks that don't hang below the frame and are decently long. Anyone have any that they recommend?

[85burb]

The ONLY bolt on set are brphotrod set. I am not sure about the hangin down part but they are for sure long. I have been looking for a set for about a year for a 4x4. Long tube f-dody headers may also work. I tryed them and they hit everything. My shakles, shifter linkage, trans tab, ect. But some have them on there 2wds and they say they work great.

http://www.brphotrods.com/mm5/mercha...ory_Code=CNV10

[bark]

I need to know this too....

Ive read that dkauffman05 ran a set of the $170 ebay 98-02 camaro stainless long tubes and they fit with minor grinding, and flamingbig10 ran hooker super comp #2289-1hkr, but they are pretty pricey. also heard that dynatech #115-90940030c might fit, also fairly pricey.

So far I have found nothing reasonably priced that will fit without mods.....

If you do let us know I want some asap

thanks

[85burb]

The f body will fit a 2wd better then a 4wd but i cant say if they are worth the money or not. I still do not understand why only one company has a set of headers out that WILL work. They even have them out for 88-98 trucks. You cant tell me there are more ls swaps in that year then in 73-87 year. Even 4wd s10 s have headers out for the swap. It makes me upset that it seems like nobody is trying to make a set. How long would it really take. A day or so. I wish i had the skills to make some i would be rich!

[Robznob11]

Im running f body headers and if you look at project bruser he has lots of pics of f body headers. they do hit every where you have to notch frame on both sides. if you have an 80 e you have to cut off the tranny tab. I scooted my engine back caus they hit my lower control arm but i used custom mounts to set my engine down for body drop. if you run normal swap mounts you should be right in the middle of the fram rails and have less grinding. the driver side kicks out though so you have to cut off some of the collector to get pipes to mate up with out hitting. the bruser thread has a great write up on this. it sure is better than 700$ wallet hit though, cooks makes em too high dollar

[bark]

k so I searched the whole forum, and the only thing that comes up with bruser is this post??????? lol

[85burb]

Originally Posted by bark

k so I searched the whole forum, and the only thing that comes up with bruser is this post??????? lol

HAHA i did the same thing. To many posts with that in them to find exactly the right one so i gave up.

[Robznob11]

The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board > 67-72 Chevrolet & GMC Pickups Projects and Builds
Ackattack's Pro touring restoration thread


this is where you will find it!

[85burb]

Originally Posted by Robznob11

The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board > 67-72 Chevrolet & GMC Pickups Projects and Builds
Ackattack's Pro touring restoration thread


this is where you will find it!

It does look like he has f-body headers but it is also the wrong body style. We all need 73-87 headers. Tons of places make them for 67-72 bodys. Thanks tho.

[Robznob11]

Im sorry guys but i thought the frames were pretty much the same and thats where the interferance is.oh well im sure someone will chime in
Posted via Mobile Device

[shenk10]

85burb, I know we were on the Doug Thorley post trying to find out when they were going to make some for our body style. Did you ever find out why exactly '67-'72 models wont fit our trucks. No one will answer me as to why they wouldn't work.

[C15_Sierra]

I bought a set of Schoenfeld LS swap headers for '88-98 trucks a couple months ago from Summit Racing. Haven't done a full mock up yet, but mine cleared the frame when I had the tranny supported by the stock crossmember (haven't set the angle yet, got an aftermarket one to use). I threw on the drivers side to check last night while I have my tranny out (so the engine is tilted far back) and I'm hitting the control arm bolt, so I'm confident they will clear the frame (just).

I had to remove my evaporator box to get the passenger side in. Don't have pics...my project is moving kinda slow, and I'm gonna wait to put the tranny back in to do a full fit (when I set the d/train angle)

[85burb]

Originally Posted by shenk10

85burb, I know we were on the Doug Thorley post trying to find out when they were going to make some for our body style. Did you ever find out why exactly '67-'72 models wont fit our trucks. No one will answer me as to why they wouldn't work.

I am not sure. I dont have sevral hundred bucks to find out. We need a rich test subject.......

[chevy-fun]

I'm using Schoenfeld LS swap headers an they work. Passenger side frame may need to be grinded down 1/4" cuz its close. You may not have to with adjustable motors mounts
Posted via Mobile Device

[85burb]

Originally Posted by chevy-fun

I'm using Schoenfeld LS swap headers an they work. Passenger side frame may need to be grinded down 1/4" cuz its close. You may not have to with adjustable motors mounts
Posted via Mobile Device

Any pics? Would i clear 4x4? Do you have a part number or link to the ones you are using?

[Ford Assassin]

Originally Posted by chevy-fun

I'm using Schoenfeld LS swap headers an they work. Passenger side frame may need to be grinded down 1/4" cuz its close. You may not have to with adjustable motors mounts
Posted via Mobile Device

2wd or 4wd?

Thanks!!

[chevy-fun]

2wd
Posted via Mobile Device

[chevy-fun]

http://www.schoenfeldheaders.com/LS1-TRUCK.htm. Site says it will not fit 4x4
Posted via Mobile Device

[85burb]

Dang it. I am double screwed i guess.

[85burb]

In the pics i cant see why it would not work with 4x4. If the headers exit at the trans there is no reason they would not fit. Do you have any pics under the truck where the collector is?

[bark]

Well pulled the trigger and ordered a set of the $170 ebay 98-02 long tube stainless. When I get them I will take pics of how much cutting and bending needs to be done for them to fit. HOPEFULLY!!!!! lol

[chevy-fun]

Damn I need to wash under here lol



Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

[83 Silverado]

Chevy-fun what motor mounts are you using with you swap, I was looking at the Schoenfeld headers for my swap. how's the fit with the stock shifter linkage?

[shenk10]

I have never heard of those before but they look like good quality for the price. I might have to order a pair. LS1 and LS2 headers are the same right?

[usmcchevy]

Originally Posted by shenk10

LS1 and LS2 headers are the same right?

Yes.