|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
10-30-2011, 01:29 PM
|
#1 |
|
C10 CLUB Y QUE!
Join Date: Mar 2010
Location: Here
Posts: 2,770
|
brake issue on 65 conversion
i just changed from drums to disc. used early classic drop spindels, replaced ball joints.
but adding my brake booster and Mc theres a rod issue. the rod for the old MC is alot longer than the rod for the brake booster. any idea on how every one does this ill post pic if needed thank you |
|
|
|
10-30-2011, 02:01 PM
|
#2 |
|
Registered User
Join Date: Mar 2010
Location: san jose, california
Posts: 508
|
Re: brake issue on 65 conversion
Dont have pics but some weld to proper length. I used A mc from a 76 c10 and used an adjusting nut to lengthen the pushrod. Same principal as tie rods. An adjusting sleve turned one way will spread the tie rods apart and pull them in when reversed.
Posted via Mobile Device
__________________
'66 chevy lwb c10 '65 chevy lwb c20 |
|
|
|
|
10-30-2011, 02:48 PM
|
#3 |
|
C10 CLUB Y QUE!
Join Date: Mar 2010
Location: Here
Posts: 2,770
|
Re: brake issue on 65 conversion
here some pics
|
|
|
|
|
10-30-2011, 03:00 PM
|
#4 |
|
Registered User
Join Date: Mar 2010
Location: san jose, california
Posts: 508
|
Re: brake issue on 65 conversion
Wow thats a huge difference. Is it posible to use your original pushrod and just lengthen it? If the mc is a universal type there may be adaptors for proper length. Srry couldnt be of much help
Posted via Mobile Device
__________________
'66 chevy lwb c10 '65 chevy lwb c20 |
|
|
|
|
10-30-2011, 05:34 PM
|
#5 |
|
C10 CLUB Y QUE!
Join Date: Mar 2010
Location: Here
Posts: 2,770
|
Re: brake issue on 65 conversion
That's ok Shawn came by and we cut.and welded the.end to it.
Now were can I get bonjo bolts for the caliper. Kragen and AutoZone have one in stock but it is short and thin Posted via Mobile Device |
|
|
|
|
10-30-2011, 05:37 PM
|
#6 |
|
C/10 junkie
Join Date: Nov 2010
Location: Stockton Ca
Posts: 9,093
|
Re: brake issue on 65 conversion
Try Vic. Haha
Posted via Mobile Device
__________________
Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!" 
|
|
|
|
|
10-30-2011, 05:38 PM
|
#7 |
|
C/10 junkie
Join Date: Nov 2010
Location: Stockton Ca
Posts: 9,093
|
Re: brake issue on 65 conversion
Didn't the banjo bolts come with the calipers?
Posted via Mobile Device
__________________
Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"
|
|
|
|
|
10-30-2011, 05:39 PM
|
#8 |
|
C10 CLUB Y QUE!
Join Date: Mar 2010
Location: Here
Posts: 2,770
|
Re: brake issue on 65 conversion
No but ill cal AutoZone and see if they do
Posted via Mobile Device |
|
|
|
|
10-30-2011, 05:43 PM
|
#9 |
|
C/10 junkie
Join Date: Nov 2010
Location: Stockton Ca
Posts: 9,093
|
Re: brake issue on 65 conversion
If not there is that place right on the other side of the freeway on charter next to taco bell has all kinds of stuff like that. I think it's called j and m or something. It's a farmers hardware store. Has a lot of goodies.
Posted via Mobile Device
__________________
Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"
|
|
|
|
|
10-30-2011, 06:26 PM
|
#10 |
|
C10 CLUB Y QUE!
Join Date: Mar 2010
Location: Here
Posts: 2,770
|
Re: brake issue on 65 conversion
Nope
Posted via Mobile Device |
|
|
|
|
10-30-2011, 06:38 PM
|
#11 |
|
C/10 junkie
Join Date: Nov 2010
Location: Stockton Ca
Posts: 9,093
|
Re: brake issue on 65 conversion
I will take a look at work tomorrow and see if I can find a couple. Hope they will fit.
Posted via Mobile Device
__________________
Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"
|
|
|
|
|
10-31-2011, 10:27 AM
|
#12 |
|
Registered User
Join Date: Nov 2009
Location: Galt, Calif
Posts: 2,437
|
Re: brake issue on 65 conversion
You have a Napa store there..?
__________________
`64 C10 vortec 350/350/373 posi `69 RS/SS 350/350/308 `37 Ford 406/350/324 traclock `68 Dart 370/904/323 suregrip |
|
|
|
|
10-31-2011, 10:31 AM
|
#13 |
|
C10 CLUB Y QUE!
Join Date: Mar 2010
Location: Here
Posts: 2,770
|
Re: brake issue on 65 conversion
Yah we do but not open on Sunday when I needed them
Posted via Mobile Device |
|
|
|
|
10-31-2011, 10:49 AM
|
#14 |
|
Registered User
Join Date: Nov 2009
Location: Galt, Calif
Posts: 2,437
|
Re: brake issue on 65 conversion
If worse comes to worse go to pick an pull....
__________________
`64 C10 vortec 350/350/373 posi `69 RS/SS 350/350/308 `37 Ford 406/350/324 traclock `68 Dart 370/904/323 suregrip |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
