VA Need bucket seat track parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 11-01-2011, 09:10 PM

Have a couple sets missing the springs and the rods that cross over from one bracket to the next and the pieces the rod attaches to with the springs on both sides. Let me know what you have and prices please. Thanks!

VA72C10 · 11-01-2011, 09:16 PM

Here's what I'm looking for (in red boxes)

HeavyMetalChevy · 11-01-2011, 09:47 PM

will bench brackets work??? I have a TON of those??? I am not knowledgeable on these seats yet... But here I come!!! lol

VA72C10 · 11-01-2011, 09:55 PM

The pieces in the smaller red box I believe are the same....other than that it wouldn't have the same length spring or rod.

HeavyMetalChevy · 11-04-2011, 12:02 AM

Quote:

Originally Posted by VA72C10

The pieces in the smaller red box I believe are the same....other than that it wouldn't have the same length spring or rod.

well if you want the small springs I have PLENTY... I think I am up to 7 bench seats now!!! lol Have no idea what they are worth but I trust you.. Let me know

VA72C10 · 11-04-2011, 12:21 AM

can you post up some pictures? Thanks!

VA72C10 · 11-07-2011, 03:12 AM

ttt

HeavyMetalChevy · 11-07-2011, 03:47 AM

Here ya go... I have fabricated metal for 10+years as well so I can modify the rods to fit buckets.. .Just give me dimensions and I will bend/roll them spot on buddy..

HeavyMetalChevy · 11-07-2011, 03:56 AM

Also...do you know or have resources that could tell me if you can modify the top screws on the frame of bench seats to make it fold forward... I am pretty sure I can mock one up..but if someone has done it before...I am all ears..

bluepoly68 · 05-29-2013, 05:33 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

VA72C10 · 11-07-2011, 03:50 AM

Yep, those are the ones...need the entire piece...the part that looks like a "key" and the spring attached. I'll defintely get you to make some rods up...I'll get some pics and dimensions for you as soon as I get my next set of buckets with a good rod

I have three sets of tracks right now with ZERO rods

VA72C10 · 11-07-2011, 03:59 AM

Haven't seen that done on seats that don't come folding from the factory...but good idea!

HeavyMetalChevy · 11-07-2011, 04:02 AM

yeah I can not seem to get my hands on a folder no matter what!!! I'm going to put in work... I got ideas.. lol

Let me figure out which seats I a going to keep and/or scrap... I can send you a pair now though.. But if you got the dimensions I could send the rods too... I will just modify the rod from bench to utilize as much as possible because after that the frame is going to be gar-bino!!! I hate doing it but I know they will inevitably sit... Might as well let someone use what they can.

VA72C10 · 11-08-2011, 04:37 AM

still looking for more hardware (or complete sets of tracks)

VA72C10 · 11-10-2011, 05:39 PM

ttt

HeavyMetalChevy · 11-10-2011, 06:59 PM

As you know...all I have is the springs... I have 3 pair I will part with......what about the rod dimensions??? ye nay??? 40 bucks shipped on 3 sets???

VA72C10 · 11-10-2011, 07:02 PM

I'll get the dimensions tonight...I just got my set of brackets that have one in it in the mail

Is that 40 shipped for the springs w/ the "key shaped" pieces and the rods? If so, I'll take it.

HeavyMetalChevy · 11-10-2011, 08:14 PM

Quote:

Originally Posted by VA72C10

I'll get the dimensions tonight...I just got my set of brackets that have one in it in the mail

Is that 40 shipped for the springs w/ the "key shaped" pieces and the rods? If so, I'll take it.

Just for the complete springs... I will have to fab the rods for minimal fee.. Say 20 bucks for all those making 3 complete sets of springs and rods you need...It should take me around hour to cut rods roll and press into dimensions needed.. .so basically just charging labor on those.

**rockc** · 11-10-2011, 09:05 PM

If you are gonna make some rods I would be interested in 10.

HeavyMetalChevy · 11-15-2011, 01:44 AM

Quote:

Originally Posted by rockc

If you are gonna make some rods I would be interested in 10.

10 rods or sets... 20 per set.. .They are a little more time consuming then anticipated...

VA72C10 · 11-10-2011, 10:16 PM

Quote:

Originally Posted by HeavyMetalChevy

Just for the complete springs... I will have to fab the rods for minimal fee.. Say 20 bucks for all those making 3 complete sets of springs and rods you need...It should take me around hour to cut rods roll and press into dimensions needed.. .so basically just charging labor on those.

so 60 total? That will work. Thanks. I'll draw a quick picture of the rod with dimensions and post late this evening/tomorrow morning when I'm home (at sister in laws right now as they are out shopping

)

VA72C10 · 11-15-2011, 12:49 AM

Here are the pics and the measurement finally...

10 3/4" long. Note how the ends face different directions

HeavyMetalChevy · 11-15-2011, 01:00 AM

I have the springs ready... I will ship those you want them now??? am going to go start fabbing the rods... Let me mock a pair up... Also need the "hook" specs... How long is the "L" hook looks to be about a quarter inch...lol ahh heck with it I just remembered I have some..lol

VA72C10 · 11-15-2011, 02:49 AM

Quote:

Originally Posted by HeavyMetalChevy

I have the springs ready... I will ship those you want them now??? am going to go start fabbing the rods... Let me mock a pair up... Also need the "hook" specs... How long is the "L" hook looks to be about a quarter inch...lol ahh heck with it I just remembered I have some..lol

you can just ship together...the springs are no good to me w/out the rods...

**rockc** · 11-15-2011, 11:37 AM

I will take 10, Let me know how to pay and where to send.

11-01-2011, 09:10 PM	#1
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Need bucket seat track parts Have a couple sets missing the springs and the rods that cross over from one bracket to the next and the pieces the rod attaches to with the springs on both sides. Let me know what you have and prices please. Thanks! __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-01-2011, 09:16 PM	#2
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Need bucket seat track parts Here's what I'm looking for (in red boxes) Attached Images __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-01-2011, 09:47 PM	#3
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Need bucket seat track parts will bench brackets work??? I have a TON of those??? I am not knowledgeable on these seats yet... But here I come!!! lol __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

11-01-2011, 09:55 PM	#4
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Need bucket seat track parts The pieces in the smaller red box I believe are the same....other than that it wouldn't have the same length spring or rod. __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-04-2011, 12:21 AM	#6
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Need bucket seat track parts can you post up some pictures? Thanks! __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-07-2011, 03:12 AM	#7
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Need bucket seat track parts ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-07-2011, 03:47 AM	#8
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Need bucket seat track parts Here ya go... I have fabricated metal for 10+years as well so I can modify the rods to fit buckets.. .Just give me dimensions and I will bend/roll them spot on buddy.. Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

11-07-2011, 03:56 AM	#9
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Need bucket seat track parts Also...do you know or have resources that could tell me if you can modify the top screws on the frame of bench seats to make it fold forward... I am pretty sure I can mock one up..but if someone has done it before...I am all ears.. Attached Images __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

05-29-2013, 05:33 PM	#10
bluepoly68 Registered User Join Date: May 2013 Location: calgary canada Posts: 1	Re: Need bench seat track parts Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help.

11-07-2011, 03:50 AM	#11
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Need bucket seat track parts Yep, those are the ones...need the entire piece...the part that looks like a "key" and the spring attached. I'll defintely get you to make some rods up...I'll get some pics and dimensions for you as soon as I get my next set of buckets with a good rod I have three sets of tracks right now with ZERO rods __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-07-2011, 03:59 AM	#12
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Need bucket seat track parts Haven't seen that done on seats that don't come folding from the factory...but good idea! __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-07-2011, 04:02 AM	#13
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Need bucket seat track parts yeah I can not seem to get my hands on a folder no matter what!!! I'm going to put in work... I got ideas.. lol Let me figure out which seats I a going to keep and/or scrap... I can send you a pair now though.. But if you got the dimensions I could send the rods too... I will just modify the rod from bench to utilize as much as possible because after that the frame is going to be gar-bino!!! I hate doing it but I know they will inevitably sit... Might as well let someone use what they can. __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

11-08-2011, 04:37 AM	#14
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Need bucket seat track parts still looking for more hardware (or complete sets of tracks) __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-10-2011, 05:39 PM	#15
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Need bucket seat track parts ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-10-2011, 06:59 PM	#16
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Need bucket seat track parts As you know...all I have is the springs... I have 3 pair I will part with......what about the rod dimensions??? ye nay??? 40 bucks shipped on 3 sets??? __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog



Register or Log In To remove these advertisements.

11-10-2011, 07:02 PM	#17
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Need bucket seat track parts I'll get the dimensions tonight...I just got my set of brackets that have one in it in the mail Is that 40 shipped for the springs w/ the "key shaped" pieces and the rods? If so, I'll take it. __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-10-2011, 09:05 PM	#19
rockc Registered User Join Date: Jul 2007 Location: SE WY Posts: 640	Re: Need bucket seat track parts If you are gonna make some rods I would be interested in 10. __________________ 72 chevy 3/4 ton 4X4

11-15-2011, 12:49 AM	#22
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Need bucket seat track parts Here are the pics and the measurement finally... 10 3/4" long. Note how the ends face different directions __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-15-2011, 01:00 AM	#23
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: Need bucket seat track parts I have the springs ready... I will ship those you want them now??? am going to go start fabbing the rods... Let me mock a pair up... Also need the "hook" specs... How long is the "L" hook looks to be about a quarter inch...lol ahh heck with it I just remembered I have some..lol __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

11-15-2011, 11:37 AM	#25
rockc Registered User Join Date: Jul 2007 Location: SE WY Posts: 640	Re: Need bucket seat track parts I will take 10, Let me know how to pay and where to send. __________________ 72 chevy 3/4 ton 4X4

Register or Log In To remove these advertisements.