driver side firewall tub? wiring harness placement? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

iveyftp · 11-05-2011, 04:33 AM

i am tubbing my firewall on my 79 c10 to lay body on 24 and i was wondering if anyone had any pics of what they did with the factory wiring harness that goes through the firewall on the driver side? any advise or pics would be greatly appreciated. i want to get my truck on the road.

iveyftp · 11-07-2011, 02:57 AM

anyone? i know someone on here has done this surely?

SYCOTIK · 11-07-2011, 01:43 PM

On mine I just cut the box location out from the firewall and moved it over a couple inches...

Posted via Mobile Device

SYCOTIK · 11-07-2011, 01:47 PM

Just realized u said ur tubbing the firewall too. Idk how much room ur tub will take up so u may or may not b able to do it this way. I have a PB dropmember on mine so I didn't have to tub it...
Posted via Mobile Device

iveyftp · 11-08-2011, 01:24 AM

Quote:

Originally Posted by SYCOTIK

Just realized u said ur tubbing the firewall too. Idk how much room ur tub will take up so u may or may not b able to do it this way. I have a PB dropmember on mine so I didn't have to tub it...
Posted via Mobile Device

thanks man, and i do believe i may be able to move the original square up and over to clear my tub. i would have just bought a crossmember but my frame is already z'd.

thanks for your help a bunch.

iveyftp · 11-08-2011, 01:31 AM

now i think i am going to have to notch my cowl hood to clear the engine. i bought a cowl thinking it would clear when a stock hood wouldnt. guess what? they are the same underneith. any good word on what to do here?

SYCOTIK · 11-08-2011, 12:22 PM

No prob man. As for the hood, I don't have mine on yet but I do know ill need a cowl too. Just trim out the bracing that's in the center of the hood till it clears
Posted via Mobile Device

iveyftp · 11-09-2011, 12:31 AM

Quote:

Originally Posted by SYCOTIK

No prob man. As for the hood, I don't have mine on yet but I do know ill need a cowl too. Just trim out the bracing that's in the center of the hood till it clears
Posted via Mobile Device

Wont cutting the bracing out make the hood flemzy and weak?

SYCOTIK · 11-09-2011, 01:14 PM

Trucks with clearence issues do it all the time. U only need to cut the bracing out of the cowl part where ur aircleaner would b
Posted via Mobile Device

iveyftp · 11-10-2011, 12:52 AM

im running a 5.3 in it and as it looks its gonna be quit a bit of cutting. i hate cutting up ba
rand new sheetmetal haha. thx sycotik. any pics of your build on here anywhere?

SYCOTIK · 11-10-2011, 01:05 PM

No I haven't made a thread for it yet over here, itd b a lot of pics to catch up on all at once, but I might get around to it. I do have it on the other forum tho. http://c10forum.com/forum/showthread.php?t=2348
Posted via Mobile Device

iveyftp · 11-14-2011, 06:42 AM

Quote:

Originally Posted by SYCOTIK

No I haven't made a thread for it yet over here, itd b a lot of pics to catch up on all at once, but I might get around to it. I do have it on the other forum tho. http://c10forum.com/forum/showthread.php?t=2348
Posted via Mobile Device

i looked at your build thread that thing is sic! how far are you on it now?

SYCOTIK · 11-14-2011, 12:27 PM

Thanks man. That's pretty much up to date. I'm just puttin all the wiring back in right now so I can try and get it running before moving on...
Posted via Mobile Device

11-05-2011, 04:33 AM	#1
iveyftp Registered User Join Date: Oct 2011 Location: wilburton, ok Posts: 33	driver side firewall tub? wiring harness placement? i am tubbing my firewall on my 79 c10 to lay body on 24 and i was wondering if anyone had any pics of what they did with the factory wiring harness that goes through the firewall on the driver side? any advise or pics would be greatly appreciated. i want to get my truck on the road.

11-07-2011, 02:57 AM	#2
iveyftp Registered User Join Date: Oct 2011 Location: wilburton, ok Posts: 33	Re: driver side firewall tub? wiring harness placement? anyone? i know someone on here has done this surely?

11-07-2011, 01:43 PM	#3
SYCOTIK Registered User Join Date: Feb 2011 Location: Vacaville, CA Posts: 34	Re: driver side firewall tub? wiring harness placement? On mine I just cut the box location out from the firewall and moved it over a couple inches... Posted via Mobile Device

11-07-2011, 01:47 PM	#4
SYCOTIK Registered User Join Date: Feb 2011 Location: Vacaville, CA Posts: 34	Re: driver side firewall tub? wiring harness placement? Just realized u said ur tubbing the firewall too. Idk how much room ur tub will take up so u may or may not b able to do it this way. I have a PB dropmember on mine so I didn't have to tub it... Posted via Mobile Device

11-08-2011, 01:31 AM	#6
iveyftp Registered User Join Date: Oct 2011 Location: wilburton, ok Posts: 33	Re: driver side firewall tub? wiring harness placement? now i think i am going to have to notch my cowl hood to clear the engine. i bought a cowl thinking it would clear when a stock hood wouldnt. guess what? they are the same underneith. any good word on what to do here?

11-08-2011, 12:22 PM	#7
SYCOTIK Registered User Join Date: Feb 2011 Location: Vacaville, CA Posts: 34	Re: driver side firewall tub? wiring harness placement? No prob man. As for the hood, I don't have mine on yet but I do know ill need a cowl too. Just trim out the bracing that's in the center of the hood till it clears Posted via Mobile Device

11-09-2011, 01:14 PM	#9
SYCOTIK Registered User Join Date: Feb 2011 Location: Vacaville, CA Posts: 34	Re: driver side firewall tub? wiring harness placement? Trucks with clearence issues do it all the time. U only need to cut the bracing out of the cowl part where ur aircleaner would b Posted via Mobile Device

11-10-2011, 12:52 AM	#10
iveyftp Registered User Join Date: Oct 2011 Location: wilburton, ok Posts: 33	Re: driver side firewall tub? wiring harness placement? im running a 5.3 in it and as it looks its gonna be quit a bit of cutting. i hate cutting up ba rand new sheetmetal haha. thx sycotik. any pics of your build on here anywhere?

11-10-2011, 01:05 PM	#11
SYCOTIK Registered User Join Date: Feb 2011 Location: Vacaville, CA Posts: 34	Re: driver side firewall tub? wiring harness placement? No I haven't made a thread for it yet over here, itd b a lot of pics to catch up on all at once, but I might get around to it. I do have it on the other forum tho. http://c10forum.com/forum/showthread.php?t=2348 Posted via Mobile Device

11-14-2011, 12:27 PM	#13
SYCOTIK Registered User Join Date: Feb 2011 Location: Vacaville, CA Posts: 34	Re: driver side firewall tub? wiring harness placement? Thanks man. That's pretty much up to date. I'm just puttin all the wiring back in right now so I can try and get it running before moving on... Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.