Could this be a factory tach for a 64-66 chevy truck

[csa daddy]

Could this tach in this 67-72 bezel be a factory tach for a 64-66 chevy

[SIR]

YES IT'S FACTORY BUT IT'S A 70's PANEL....

[Joemomma1]

Looks like it is to me.

[csa daddy]

That's what I was think that's awesome a buddy of mine has it what ya think it's worth
Posted via Mobile Device

[Joemomma1]

Every one that I have seen sold on ebay goes for at least $100. They sell that repop for $250 I think, but heard they're not that great. Should go for a decent price.

[csa daddy]

A friend of mine has it I was just wondering what would be a fair offer on it
Posted via Mobile Device

[Clyde65]

A friend should just gift it to you, I mean a real friend would, right?

[aerotruk63]

That's right about the friend thing and it is the Season for giving isn't it?
Make sure it's for a V8 if that's what your running and if it's an older tach's it might need the transmitter.

[csa daddy]

would be nice if he gave it to me but he's unemployed so he needs some money so i figured i would try to give him a good offer for it to help him some

[1963c-10]

The sunpro EB-8 was the tach the factory used, and it didn't require a transmitter. It was a self-contained unit.

[Clyde65]

THAT is a good friend for sure!

[sinnersahuayo]

does anybody now how to hook one of those up

[1963c-10]

Originally Posted by sinnersahuayo

does anybody now how to hook one of those up

Factory tach hook up is pretty easy. The tach wiring is seperate from the rest of the wiring harness, so this makes is easier. The tach's ground is through the metal dash so there are only two wires to hook up. The power plugs into the fuse panel and the sensor wire is hooked to the negative (-) terminal on the coil.

[csa daddy]

Thanks but that's what I would hope somebody would do for me atleast . Times are tough an if we look out for each other things will be ok
Posted via Mobile Device

[csa daddy]

50 dollars sound fair right either way he said I could get it for 50 bucks I'm happy with that
Posted via Mobile Device

[1963c-10]

Thats a steal. Would definitely pick it up for that

[gostranger]

nice score!!!!!

[csa daddy]

Thanks need to do a small resto on it but a good find my 64 short bed is going to be full a complete optioned out truck on the inside an outside just not under neath the hood an body
Posted via Mobile Device

[1963c-10]

Here is a pic of my factory tach and vacuum guage 1963

[csa daddy]

No pic
[size=1]Posted via Mobile Device[/size
Never mind I c it now

[csa daddy]

Nice I may do that in my sub also
Posted via Mobile Device

[1963c-10]

The vacuum guage was the hardest to come across. My guages came from c-50 and had a tach and air guage for the brakes originally, but I wanted the factory vacuum guage. Took me two years to find one, but Im loving it just because you rarely ever come across them. I also chromed the gauge bezel, which I may keep or go back to the original painted one. I get alot of glare off of it.

[csa daddy]

Do you still have the air gauge
Posted via Mobile Device

[scottveazie]

Would this tach fit correctly in a '65?
http://www.ebay.com/itm/Sunpro-FZ88R...#ht_1034wt_689
Posted via Mobile Device

[pdxhall]

Originally Posted by scottveazie

Would this tach fit correctly in a '65?
http://www.ebay.com/itm/Sunpro-FZ88R...#ht_1034wt_689
Posted via Mobile Device

It looks to me like it would fit just fine. Correct diameter, half sweep, and looks just like the 5k tach. But that's for Chev. You didn't say if it was Chev or GMC.