Front Bearings Good for 140mph ??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bcdeutsch731 · 12-21-2011, 08:15 AM

I have the stock front suspension on my truck with the stock disc brakes and wanted to know if there is a good upgrade to the front brakes/bearing. Next year my truck should be running in the 9's around 140mph and I just don't trust the small bearings in the front. I'm running 5 lug 15" wheels and would like to stay with that.
Thanks
Brett
Edit: I forgot to mention that my truck has a Duramax diesel in it and the truck weighs 5100lbs total. Front is 3160lbs and rear is 1920lbs. That is why I don't like the small bearings in the front.

*WAAF* · 12-21-2011, 09:04 AM

I highly doubt you added more weight with the swap.. than those bearings are designed for..
iirc a 3/4 ton the difference is in the balljoints.. and arms.. not the bearings..
I'd worry about the correct grease and the seal over the bearings
you change the lower a arm mounting u bolts to the thicker 73 up type?

bcdeutsch731 · 12-21-2011, 02:46 PM

Quote:

Originally Posted by WAAF

I highly doubt you added more weight with the swap.. than those bearings are designed for..
iirc a 3/4 ton the difference is in the balljoints.. and arms.. not the bearings..
I'd worry about the correct grease and the seal over the bearings
you change the lower a arm mounting u bolts to the thicker 73 up type?

The only thing I have done with the front suspension is add the big block springs. You are saying the u-bolts on the 73 and up are thicker?

SCOTI · 12-21-2011, 10:05 AM

Quote:

Originally Posted by bcdeutsch731

I have the stock front suspension on my truck with the stock disc brakes and wanted to know if there is a good upgrade to the front brakes/bearing. Next year my truck should be running in the 9's around 140mph and I just don't trust the small bearings in the front. I'm running 5 lug 15" wheels and would like to stay with that.
Thanks
Brett
Edit: I forgot to mention that my truck has a Duramax diesel in it and the truck weighs 5100lbs total. Front is 3160lbs and rear is 1920lbs. That is why I don't like the small bearings in the front.

I would compare the physical size of the bearings between a 1/2 ton & 3/4 ton truck. See if the p/n's are different & if so, go to a parts store & compare the 2 bearing sets.

It would also go w/o saying (& I'm sure you've already are) but run the best bearing money can buy.

jimmydean · 12-21-2011, 03:23 PM

The u bolts are thinner on the 60-66, but I think the 67+ are the same.

SCOTI · 12-21-2011, 04:42 PM

Quote:

Originally Posted by jimmydean

The u bolts are thinner on the 60-66, but I think the 67+ are the same.

The front crossmember a-arm U-bolts for drum brake trucks are smaller vs disc brake trucks (not just 60-66). U-bolts for 73-87's are the same for C10's - C30's.

GCncsuHD · 12-21-2011, 03:48 PM

Not sure about the speed ratings, but as far as weight, something to look into is

88-98 C1500 (5x5) and C2500 light duty (6x5.5) both share the same spindles and bearings. Maybe go to a parts store, pick up bearings for that application and compare. IIRC square body LCAs and the upper BJs off a 88-98 C2500 will make those spindles work for you.

KQQL IT · 12-22-2011, 03:16 AM

When i was young and retarded. My poor old 77 got whipped hard. Had a 2.73 gear and nasty 406. And it would run 5800-6000 in high gear. And leave it there till the oil pressure went away. Still cant I survived stunts like that much less the bearings or the radial t/a's.
Posted via Mobile Device

oldspowered67C10 · 12-22-2011, 03:44 AM

Quote:

When i was young and retarded. My poor old 77 got whipped hard. Had a 2.73 gear and nasty 406. And it would run 5800-6000 in high gear. And leave it there till the oil pressure went away. Still cant I survived stunts like that much less the bearings or the radial t/a's.

Ahh youth, I cant count all the times I had my 67 well over 130 w/ radial T/As for way too long(big block w/ 3.08 gears). Anyways, I kinda doubt the bearings will be the failure point but a temp gun on the rotor centers might tell a story.

fastwillie 696969 · 12-22-2011, 05:59 AM

keep the wheels up as long as possible

*WAAF* · 12-22-2011, 07:06 AM

taller tires slow the bearings down

edhtrd71 · 12-26-2011, 01:22 AM

Dont hold me to it but I think your pretty safe with the stock bearings. I agree to run the best ones you can find. I only use timken bearings but Im not sure if these are the best. In general the taper wheel bearing is very robust and larger than needed in most vehicles.

12-21-2011, 08:15 AM	#1
bcdeutsch731 Registered User Join Date: Mar 2010 Location: West Chicago, IL Posts: 140	Front Bearings Good for 140mph ??? I have the stock front suspension on my truck with the stock disc brakes and wanted to know if there is a good upgrade to the front brakes/bearing. Next year my truck should be running in the 9's around 140mph and I just don't trust the small bearings in the front. I'm running 5 lug 15" wheels and would like to stay with that. Thanks Brett Edit: I forgot to mention that my truck has a Duramax diesel in it and the truck weighs 5100lbs total. Front is 3160lbs and rear is 1920lbs. That is why I don't like the small bearings in the front. __________________ 1969 C10, 2005 LLY Duramax, Wagler Competition built motor, Bullseye Power triple Turbo's, Rossler th400, Neal Chance Racing Converter, Danville Performance tunning. 8.3@168mph 1700+ HP Last edited by bcdeutsch731; 12-21-2011 at 08:44 AM.

12-21-2011, 09:04 AM	#2
WAAF Account Suspended Join Date: Dec 2011 Location: ma Posts: 278	Re: Front Bearings Good for 140mph ??? I highly doubt you added more weight with the swap.. than those bearings are designed for.. iirc a 3/4 ton the difference is in the balljoints.. and arms.. not the bearings.. I'd worry about the correct grease and the seal over the bearings you change the lower a arm mounting u bolts to the thicker 73 up type?

12-21-2011, 03:23 PM	#5
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: Front Bearings Good for 140mph ??? The u bolts are thinner on the 60-66, but I think the 67+ are the same. __________________ New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210

12-21-2011, 03:48 PM	#7
GCncsuHD Charlie Daniels w/ a Tq Wrench Join Date: May 2009 Location: Statesville, NC Posts: 1,570	Re: Front Bearings Good for 140mph ??? Not sure about the speed ratings, but as far as weight, something to look into is 88-98 C1500 (5x5) and C2500 light duty (6x5.5) both share the same spindles and bearings. Maybe go to a parts store, pick up bearings for that application and compare. IIRC square body LCAs and the upper BJs off a 88-98 C2500 will make those spindles work for you. __________________ ΜΟΛΩΝ ΛΑΒΕ 67 C10 Shortbed "Great Grandpa's Truck" I6 3 on the Tree 71k original miles 5.3 swap in the works 69 K5 Blazer-Family Beach Cruiser Project 78 K30 Dually Semi-Retired Fire Truck 350/SM465 35"s SOLD01 2500HD ECSB 6.0 4x4 5.13's 8" lift 38"s

12-22-2011, 03:16 AM	#8
KQQL IT At the body shop. Join Date: Aug 2009 Location: Land of fruits and nuts. Posts: 5,257	Re: Front Bearings Good for 140mph ??? When i was young and retarded. My poor old 77 got whipped hard. Had a 2.73 gear and nasty 406. And it would run 5800-6000 in high gear. And leave it there till the oil pressure went away. Still cant I survived stunts like that much less the bearings or the radial t/a's. Posted via Mobile Device __________________ " That didnt make it any newer " " Dont antique the equipment "

12-22-2011, 05:59 AM	#10
fastwillie 696969 ~Rest In Peace~ Join Date: May 2005 Location: CALIFORNIA NOR CAL Posts: 9,707	Re: Front Bearings Good for 140mph ??? keep the wheels up as long as possible __________________ is it fast ? it has a lighting bolt donut? B___H please, I can remove 90% of your so called "beauty" with a kleenex

12-22-2011, 07:06 AM	#11
WAAF Account Suspended Join Date: Dec 2011 Location: ma Posts: 278	Re: Front Bearings Good for 140mph ??? taller tires slow the bearings down

12-26-2011, 01:22 AM	#12
edhtrd71 Registered User Join Date: Jan 2011 Location: Edinburg, Texas. Posts: 194	Re: Front Bearings Good for 140mph ??? Dont hold me to it but I think your pretty safe with the stock bearings. I agree to run the best ones you can find. I only use timken bearings but Im not sure if these are the best. In general the taper wheel bearing is very robust and larger than needed in most vehicles.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.