Tow Hooks and Spoiler up front on 84

[X Baldwin Motion]

Tow Hooks and Spoiler up front on an 84?


anybody have them?

pics please, also of how the hooks mount up to the frame.


thanks in advance.

[X Baldwin Motion]

are these the correct units? thanks

[Goldfinger]

you can use the generic straight hooks at an auto/tractor store.
http://www.northerntool.com/shop/too...ct_20027_20027

[X Baldwin Motion]

Originally Posted by Goldfinger

you can use the generic straight hooks at an auto/tractor store.
http://www.northerntool.com/shop/too...ct_20027_20027

those hooks don't even come close to working on an 84 K10. I bought them from LMC thinking they were correct but they would require extensive adaptation to be strong and functional, especially with the spoiler.

thanks anyhow!

[Goldfinger]

did you try to mount them on the bottom lip of the frame. i've been pulled out many times with them.

[rcbildr]

I think I've got them on my 83...can't really tell with the one pic I have on my phone. I'll take some pics tomorrow and post them up.

[X Baldwin Motion]

Originally Posted by Goldfinger

did you try to mount them on the bottom lip of the frame. i've been pulled out many times with them.

they will not mount without welding or drilling, and to clear the spoiler and to "stick out" they would need a custom block or plate.

I almost had gotten something welded up but will now try to get the factory units.


anyone have any leads?
thanks.

[Keith Seymore]

No pics, but the tow hooks should mount using the two horizontal bolts that hold the bumper bracket to the end of the frame (the bolts are shared, and do both functions). I did that job for one day, installing the front bumper on the assembly line. Even dropped a tow hook on my trainer's foot at one point....

They should hang down sort of vertically. There is a cut out in the spoiler to provide access; you should be able to take a "non tow hook" spoiler and cut a notch in it to convert it to a tow hook spoiler - I think there are some ribs on the back side that will help you locate where to trim.

K

[rcbildr]

Sorry, I didn't get a chance to look at my truck today. I had to work on my burb chasing down a fuel leak and reattaching the starter bracket. I'll try to get some pics tomorrow.

[rcbildr]

My 83 does have tow hooks and a front air dam/ spoiler. I'll post up some pics later on today. Sorry for the delay, I had a busy weekend.
Posted via Mobile Device

[rcbildr]

Here's the front spoiler. I checked the spid and it says nothing about it so I'm thinking it's aftermarket. Looks like soomeone had to cut the spoiler to make room for the hooks.




This pic is of the tow hooks on my 85 Burb. They mount up the same on my 83, it was too tight to get a good pic. Hope this helps.

[X Baldwin Motion]

Thanks everyone, big help. I've got a pair coming in the mail, I'll post up pics when it's together.


Chris
Posted via Mobile Device

[Keith Seymore]

Originally Posted by rcbildr

Here's the front spoiler. I checked the spid and it says nothing about it so I'm thinking it's aftermarket. Looks like soomeone had to cut the spoiler to make room for the hooks.




This pic is of the tow hooks on my 85 Burb. They mount up the same on my 83, it was too tight to get a good pic. Hope this helps.

Spoiler looks production to me. I agree: Maybe someone added the tow hooks and cut the spoiler themselves, but they emulated the production set up.

Tow hook RPO is V76, and should appear on your SPID if they were ordered originally.

K

[special-K]

The first thing I did when I got my '90 Blazer was take that useless piece of plastic off
I can see where doing a correct resto you'd want it. But,I'd leave it in the garage and just tell people I had it if it was me. Aerodynamics...yeah right!

[X Baldwin Motion]

Originally Posted by special-K

The first thing I did when I got my '90 Blazer was take that useless piece of plastic off
I can see where doing a correct resto you'd want it. But,I'd leave it in the garage and just tell people I had it if it was me. Aerodynamics...yeah right!

Not sure if these "square bodies" ever went through the wind tunnel, I think the spoiler/air dam is more of a cosmetic piece, maybe even helpful in keeping the underside clean during normal paved street use.

without spoiler; gnarly looking, I must admit.



with spoiler (hides my ugly suspension til I ever decide to clean and detail)


tow hooks installed (thanks to a member here for a painless purchase)

[AntiGov]

I believe the spoiler was designed to throw more air into the radiator, you would only notice the difference under extreme conditions

[Keith Seymore]

Originally Posted by X Baldwin Motion

Not sure if these "square bodies" ever went through the wind tunnel, I think the spoiler/air dam is more of a cosmetic piece, maybe even helpful in keeping the underside clean during normal paved street use.

Squares did go through the wind tunnel (remember the bump on the front of the hood?) and the front spoiler was for aero. It helps clean up the airflow and push the air around the sides of the truck.

That's why the 4wd version is longer than the 2wd version (to keep them both about the same distance off the pavement).

Originally Posted by AntiGov

I believe the spoiler was designed to throw more air into the radiator, you would only notice the difference under extreme conditions

This is not correct. Spoilers designed to throw more air into the radiator are located directly under the radiator support as opposed to under the bumper (under the bumper is too far forward for that purpose).

K

[72c20customcamper]

Old thread I know . I’m putting the hooks I bought on my 87 this week . The hooks use the same bolt holes as the front bumper correct ?

And the spoiler thing is to reduce the air pressure under the truck . This will let air flow through the radiator as air in the engine compartment exits to the low pressure . Made one for my Avanti and it helped greatly with temps at cruising speeds. Notice the lack of a grill air came in from under the bumper

[Willowrun]

Originally Posted by 72c20customcamper

Old thread I know . I’m putting the hooks I bought on my 87 this week . The hooks use the same bolt holes as the front bumper correct ?

No. They use separate bolts that bolt to the frame behind the bumper. This is my 84 with hooks and spoiler.

[Mr. 250r]

The hooks work great for just pulling someone our but when you start yanking they will rip out seen it happen multiple times one almost took my back windshield out
Posted via Mobile Device

[special-K]

Originally Posted by Mr. 250r

The hooks work great for just pulling someone our but when you start yanking they will rip out seen it happen multiple times one almost took my back windshield out
Posted via Mobile Device

With a snatch strap? I've never seen that. I'd never yank anything with a chain.

[Mr. 250r]

Nope with a 5in thick barge rope which has much more give than a chain but then it broke now we have a bigger brand new nylon barge rope not sure of the Kevlar one I wanted though
Posted via Mobile Device

[thirdstreettito]

Stock hooks and spoiler. My old 84 K10 had it. My 83 K15 has it. An 89 I bought had it too.