Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
02-07-2012, 03:54 PM | #1 |
Registered User
Join Date: Feb 2007
Location: NE Ohio
Posts: 737
|
Help a brother out! Im torn.......
I find myself torn between 2 trucks.. I'm not usually the type to waffle. I see it, I buy it, I do stuff and then get bored and move on. My wife says I have automotive A.D.D.
So anyway. Here's the scoop.. Truck 1 is a 63 short fleet BBW, 327 with saginaw car 4spd. Really really solid minus lower fenders. Needs windshield, and needs 4spd re-installed. Bed floor. And had all custom trim shaved so its straight but had filler where trim was. Hasn't run in 3yrs but been garaged. Truck 2 is 64 short fleet BBW, inline 6 with 3spd on floor. Great natural patina, needs both front fenders repaired, pretty solid but not as nice as 63. Runs n drives but needs gone over to solidify everything. Windshield good but rear bbw needs replaced. Have gasket. This truck has all custom trim intact. Both trucks same price. I havnt been this torn between 2 trucks in forever. Part of me likes idea of 327 with car 4spd. Fun to drive. Part of like idea of inline and swapping 5spd in. Still fun, inlines sound great with duals and will pull great mpg to daily use 9mo a yr. And patina is cool. OMG....help me..................... Posted via Mobile Device
__________________
Tim Road Hounds |
02-07-2012, 04:01 PM | #2 |
Registered User
Join Date: Jan 2011
Location: Vicksburg, Mississippi
Posts: 567
|
Re: Help a brother out! Im torn.......
Hard to say without pics but I'd have to go knee knocker with the V8 and 4 speed, though I'd rather have the trim intact, and I just don't get that whole patina thing..
|
02-07-2012, 05:13 PM | #3 | |
Registered User
Join Date: Jul 2009
Location: fallbrook, ca
Posts: 326
|
Re: Help a brother out! Im torn.......
Quote:
and this would cure both problems but sounds as though you couldnt go wrong either way! man i wish i could be shopping for another project almost as much as I want my current projects done ok so long winded I vote for the 63 whew good luck! |
|
02-07-2012, 04:05 PM | #4 |
Registered User
Join Date: May 2005
Location: Beaverton, OR
Posts: 3,728
|
Re: Help a brother out! Im torn.......
I would have loved a clean knee knocker myself. I didn't find one when I was looking.
__________________
New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210 |
02-07-2012, 04:05 PM | #5 |
Registered User
Join Date: Mar 2010
Location: riverside ca
Posts: 152
|
Re: Help a brother out! Im torn.......
IMHO if you want to drive it regularly... go for the 64. an inliner with fentons or cliffords and a t-5 is fun and reliable.
|
02-07-2012, 04:23 PM | #6 |
1965 Chevy C10, 2005 4.8L/4l60
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,546
|
Re: Help a brother out! Im torn.......
I say the knee knocker too, you can also put that 5 speed in that dude too!
__________________
Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 support our troops! |
02-07-2012, 04:32 PM | #7 |
Registered User
Join Date: Jan 2011
Location: Vicksburg, Mississippi
Posts: 567
|
Re: Help a brother out! Im torn.......
V8's can be driven regularly and are fun and reliable too!
|
02-07-2012, 04:33 PM | #8 |
Registered User
Join Date: Jul 2010
Location: los angeles,ca
Posts: 3,617
|
Re: Help a brother out! Im torn.......
that windshield is gonna be alot for the 63!! the inliner sounds like less work and youll be on the road having fun in less time
Posted via Mobile Device |
02-07-2012, 04:43 PM | #9 |
Senior Enthusiast
Join Date: Feb 2007
Location: Spokane Valley, WA
Posts: 8,356
|
Re: Help a brother out! Im torn.......
If I were in the same spot I’d be having the same issues. Both have good benefits. If I had to make a quick choice however it would be the 63 because they are my favorite of all the 60-66’s. And although I really enjoy the inline sixes with pipes and accessories, I haven’t found anything more fun than a V8/4 speed. The missing trim would be a bummer, but if the bodywork didn’t have to be done over, I wouldn’t care if it had no trim.
|
02-07-2012, 05:20 PM | #10 |
Registered User
Join Date: Jan 2011
Location: Vicksburg, Mississippi
Posts: 567
|
Re: Help a brother out! Im torn.......
Get'em BOTH!!!
See how easy that was? |
02-07-2012, 05:41 PM | #11 |
Registered User
Join Date: Nov 2010
Location: Lolo montana
Posts: 361
|
Re: Help a brother out! Im torn.......
well if it was me i would take the 63,i love the wrap around glass and the dash. you seem to see alot more 64-66's out there so the early ones are always cool.i like a straight 6 but a small block is hard to beat overall.if the trim holes are simply filled in with bondo and not welded in then just punch out the holes again and add trim.
the 63 sounds like more fun! |
02-07-2012, 05:50 PM | #12 |
Senior Member
Join Date: Aug 2008
Location: Long Beach, CA
Posts: 1,813
|
Re: Help a brother out! Im torn.......
It sounds like the 64 would be cheaper/quicker to turn into a daily driver: runs as is, only minor body work, rear window isn't that expensive.
On the other hand the 63 will be way more fun to drive with a sbc and a four speed. I think you should base your choice on two factors: which cab you like better, and how much you want to invest. Also, pictures would be helpful
__________________
Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble! |
02-07-2012, 06:01 PM | #13 |
Senior Member
Join Date: Jun 2007
Location: Red Deer Ab Canada
Posts: 756
|
Re: Help a brother out! Im torn.......
63
__________________
1966 427 biscayne with a 5 spd tremec on old school torque thrusts. 1972 Cheyenne Short Bed 1958 Apache short fleet 1980 Chevy short bed http://67-72chevytrucks.com/vboard/s...d.php?t=761005 1959 "Henry" http://67-72chevytrucks.com/vboard/s...d.php?t=670461 1966 Biscayne http://67-72chevytrucks.com/vboard/s...d.php?t=444419 1972 Suburban http://67-72chevytrucks.com/vboard/s...d.php?t=478828 |
02-07-2012, 06:48 PM | #14 |
Registered User
Join Date: Sep 2008
Location: San Carlos, Ca.
Posts: 3,048
|
Re: Help a brother out! Im torn.......
Knee knocker fo sho! Especially a 63. Love those things
Posted via Mobile Device
__________________
Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29 |
02-07-2012, 07:05 PM | #15 |
"Where were you in '62?"
Join Date: Jul 2004
Location: Cleveland County, North Cackalacky
Posts: 5,013
|
Re: Help a brother out! Im torn.......
'63
__________________
PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D. |
02-07-2012, 07:16 PM | #16 |
Registered User
Join Date: Feb 2007
Location: NE Ohio
Posts: 737
|
Re: Help a brother out! Im torn.......
Here's pics of both. One pic of 63 was 4yrs ago before he took stuff apart. Has scraps on sides and dents were doors over opened.
I hate to say it but I'm really drawn to blue one. Don't know what it is. Just like it. Both owners are holding for me until I decide. So gotta make decision asap. Posted via Mobile Device
__________________
Tim Road Hounds |
02-07-2012, 07:17 PM | #17 |
Registered User
Join Date: Feb 2007
Location: NE Ohio
Posts: 737
|
Re: Help a brother out! Im torn.......
Posted via Mobile Device
__________________
Tim Road Hounds |
02-07-2012, 07:19 PM | #18 |
Registered User
Join Date: Aug 2009
Location: Detroit MI
Posts: 1,209
|
Re: Help a brother out! Im torn.......
Well Tim I am going to have to tough on you on this one ..didnt know you didnt own them... you have to ask your self what year you like better , if you value patina over whatever the other truck has.. and last I can bet that you would want another 63 owner to own and care for that 63 ............... what day should I pick it up?? problem solved.. lol I hope I have been of help.....
|
02-07-2012, 07:22 PM | #19 |
Enjoy your truck
Join Date: Oct 2007
Location: Newmarket, Ontario, Canada
Posts: 1,066
|
Re: Help a brother out! Im torn.......
Both are nice looking.
The '63 would be my choice, but I'm kinda biased. Greg
__________________
1 Corinthians 10:13 1963 Chevrolet 1/2 ton 2010 Camaro SS/RS 2014 Jeep Grand Cherokee 2016 Jeep Cherokee |
02-14-2012, 01:38 AM | #20 |
Hollister, CA.
Join Date: Sep 2006
Location: Hollister, Ca.
Posts: 6,150
|
Re: Help a brother out! Im torn.......
Great choice !!
__________________
John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!" |
02-07-2012, 07:27 PM | #21 |
Registered User
Join Date: Aug 2009
Location: Detroit MI
Posts: 1,209
|
Re: Help a brother out! Im torn.......
I like the 65 grill on the 63 , my other truck is like that...
|
02-07-2012, 07:33 PM | #22 |
#16876
Join Date: Apr 2005
Location: Auburn WA
Posts: 12,266
|
Re: Help a brother out! Im torn.......
I'd roll in that '63. I'd put the correct grille back on it though.
__________________
Posted via Stationary Device '71 Custom Deluxe C-20 402. '67 Buick Special 455. '49 Plymouth Special Deluxe. "I love that old car smell" Some people are like Slinkies... not really good for anything, but they still bring a smile to your face when you push them down a flight of stairs. |
02-07-2012, 07:41 PM | #23 |
Registered User
Join Date: Jul 2009
Location: fallbrook, ca
Posts: 326
|
Re: Help a brother out! Im torn.......
dammit after pic posting Id go with the 64 BBW shortbox and not do a darn thing but make it a solid runner and sell them lame ass billet hoops back to Craigslist
|
02-07-2012, 07:42 PM | #24 |
Registered User
Join Date: Aug 2009
Location: Detroit MI
Posts: 1,209
|
Re: Help a brother out! Im torn.......
|
02-07-2012, 07:41 PM | #25 |
Registered User
Join Date: May 2009
Location: Monroe, LA
Posts: 2,104
|
Re: Help a brother out! Im torn.......
'63 w/v8 and 4 speed sounds like a winner to me too. I would HAVE to find the correct grill for it though.
__________________
Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941 |
Bookmarks |
|
|