292 setup with a 5 speed? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

focusedontheprize · 02-13-2012, 09:25 AM

So this past weekend I did a little research and came across a few things that have been in the pipeline. I finally located a 292 motor, which has been a pain. Nothing really locally, but I did find one that was pulled out of a running '70 C10 that was put to the side. I am going to take a look at this in 2 weeks.

The next thing is what is going to mate up with the 292. My 1949 Chevy is going to be a daily driver, however my goal has been to keep it an inline 6 with a 5 speed behind it.

After doing some more research I found a 2.2L 5 speed from an S10 and a NV3500 available also. I have been doing a little bit of reading and people were saying the S10 5 speeds are a bit weak if they aren't the "world edition" so it would be better to go with the NV3500.

Does anyone have any input/experience with this?

Wrenchbender Ret · 02-13-2012, 11:34 AM

It depends on what you want to do with it. I have put S-10 5 speeds behind 350 v-8s & they work good. If you are going to do burn outs of speed shift or haul heavy loads I wouldn't recomend it. For normal driveing in an old pickup it will last from now on out. The 3500 is stouter but you have to go to a hydraulic clutch setup. I am not sure if they are available with mechanicl speedo drive. The S-10 trans. are cheap & plentiful & easy to swap. There is a world of info on this website & others on it.

focusedontheprize · 02-13-2012, 04:27 PM

Thanks Wrenchbender. Yeah, I am familiar I will have to go to a hydraulic clutch setup. There are a few more things I will have to fabricate, but unfortunately I have not found anyone who has documented a NV3500 swap with an AD truck thus the reason I was asking.

beanyard · 02-13-2012, 07:51 PM

I know you found one but I have a 292 in Idaho that I probably won't use.
Posted via Mobile Device

focusedontheprize · 02-14-2012, 08:42 AM

Quote:

Originally Posted by beanyard

I know you found one but I have a 292 in Idaho that I probably won't use.
Posted via Mobile Device

Beanyard, I really appreciate it. I have been looking for a 292 around NY for some time and only came across a handful. I definitely will keep it in mind and again thanks.

02-13-2012, 09:25 AM	#1
focusedontheprize Registered User Join Date: Feb 2012 Location: CA Posts: 846	292 setup with a 5 speed? So this past weekend I did a little research and came across a few things that have been in the pipeline. I finally located a 292 motor, which has been a pain. Nothing really locally, but I did find one that was pulled out of a running '70 C10 that was put to the side. I am going to take a look at this in 2 weeks. The next thing is what is going to mate up with the 292. My 1949 Chevy is going to be a daily driver, however my goal has been to keep it an inline 6 with a 5 speed behind it. After doing some more research I found a 2.2L 5 speed from an S10 and a NV3500 available also. I have been doing a little bit of reading and people were saying the S10 5 speeds are a bit weak if they aren't the "world edition" so it would be better to go with the NV3500. Does anyone have any input/experience with this?

02-13-2012, 11:34 AM	#2
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,229	Re: 292 setup with a 5 speed? It depends on what you want to do with it. I have put S-10 5 speeds behind 350 v-8s & they work good. If you are going to do burn outs of speed shift or haul heavy loads I wouldn't recomend it. For normal driveing in an old pickup it will last from now on out. The 3500 is stouter but you have to go to a hydraulic clutch setup. I am not sure if they are available with mechanicl speedo drive. The S-10 trans. are cheap & plentiful & easy to swap. There is a world of info on this website & others on it.

02-13-2012, 04:27 PM	#3
focusedontheprize Registered User Join Date: Feb 2012 Location: CA Posts: 846	Re: 292 setup with a 5 speed? Thanks Wrenchbender. Yeah, I am familiar I will have to go to a hydraulic clutch setup. There are a few more things I will have to fabricate, but unfortunately I have not found anyone who has documented a NV3500 swap with an AD truck thus the reason I was asking.

02-13-2012, 07:51 PM	#4
beanyard Registered User Join Date: Mar 2011 Location: Idaho Falls, Idaho Posts: 247	Re: 292 setup with a 5 speed? I know you found one but I have a 292 in Idaho that I probably won't use. Posted via Mobile Device __________________ 1959 Fleetside Big Window Long Box Standard Trim soon to be Deluxe 1953 GMC Carryall Suburban



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.