TX 67-72 parts for sale....need to recoop... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

77chris03 · 02-26-2012, 11:19 PM

need to recoop on some parts i have left over and fund a little bit more of my build.... all items are listed as stated plus shipping. if it will fit in a flat rate box then it will go in a flat rate box. i charge what they charge me..

steel bezels, pair , no dents. needs blasted and paint/powder coat...$30 thanks collin
drivers aluminum bezel, has two small dents...$5
drivers side step bracket, not bends, only surface rust...$10
L-6 motor stands blasted and POR...$25
hood hinges, some play, but still feels tight, had blasted been sitting...$30
headlight assembly, ring, bulb(bad?)and bucket...$50 for both 60 shipped
grille bowties, one decent driver(no pitting), other you decide...$15 for both 20 shipped
brake proportioning valve mount...[COLOR="Red"][B]$10 shipped[COLOR="Red"][B]
ignition switch with old&new cylinder/keys, retainer and bezel...$40 shipped
gas pedal assembly ..$50 thanks aaron
new tall water pump stainless bolt kit...$25 shipped
rag joint and inter. shaft, seal not blown out...$35 set
2 other inter. shafts with seal leaking...$15 for both or $7 ea
lower control arm u bolts OEM...all 6 for $40 all good threads
OE tach harness-repop. new...$20 bought from outback...thanks Wideside
unknown harness(someone chime in)blower heater harness??...[COLOR="blue"][B]$15 shipped [COLOR="blue"][B]
stepside light buckets(i shaved mine...) $3 for the pair?? thanks john
Name: IMAG1020.jpg
Views: 956
Size: 24.8 KB

Name: IMAG1020.jpg
Views: 956
Size: 24.8 KB

Name: IMAG1021.jpg
Views: 984
Size: 24.0 KB

Name: IMAG1036.jpg
Views: 960
Size: 30.3 KB

Name: IMAG1022.jpg
Views: 965
Size: 27.2 KB

Name: IMAG1023.jpg
Views: 976
Size: 26.7 KB

77chris03 · 02-26-2012, 11:30 PM

Name: IMAG1024.jpg
Views: 939
Size: 72.5 KB

Name: IMAG1025.jpg
Views: 965
Size: 72.7 KB

Name: IMAG1026.jpg
Views: 953
Size: 32.9 KB

Name: IMAG1027.jpg
Views: 953
Size: 84.6 KB

Name: IMAG1028.jpg
Views: 946
Size: 34.9 KB

77chris03 · 02-26-2012, 11:36 PM

Name: IMAG1029.jpg
Views: 946
Size: 78.9 KB

Name: IMAG1030.jpg
Views: 962
Size: 74.2 KB

Name: IMAG1031.jpg
Views: 951
Size: 87.8 KB

Name: IMAG1032.jpg
Views: 932
Size: 32.3 KB

Name: IMAG1034.jpg
Views: 944
Size: 86.0 KB

tooter · 02-26-2012, 11:42 PM

I'm interested in all 3 HL bezels, grill emblems, an ing.sw,pending group price shipped 39562--should fit med. fl rate??

77chris03 · 02-26-2012, 11:49 PM

Quote:

Originally Posted by tooter

I'm interested in all 3 HL bezels, grill emblems, an ing.sw,pending group price shipped 39562--should fit med. fl rate??

it should but will be tight...75 shipped to you.

every thing i ship goes out next day if work permits...sometimes i have to stay late...

77chris03 · 02-26-2012, 11:38 PM

Name: IMAG1035.jpg
Views: 945
Size: 86.0 KB

Name: IMAG1038.jpg
Views: 942
Size: 32.3 KB

Name: IMAG1039.jpg
Views: 913
Size: 31.0 KB

Name: IMAG1040.jpg
Views: 916
Size: 59.9 KB

Name: IMAG1046.jpg
Views: 934
Size: 34.8 KB

77chris03 · 02-26-2012, 11:41 PM

Name: IMAG1041.jpg
Views: 907
Size: 31.1 KB

Name: IMAG1042.jpg
Views: 923
Size: 80.3 KB

Name: IMAG1050.jpg
Views: 929
Size: 111.3 KB

Name: IMAG1051.jpg
Views: 921
Size: 26.9 KB

Name: IMAG1052.jpg
Views: 910
Size: 77.2 KB

77chris03 · 02-26-2012, 11:44 PM

Name: IMAG1043.jpg
Views: 914
Size: 85.6 KB

Name: IMAG1044.jpg
Views: 905
Size: 107.8 KB

Name: IMAG1045.jpg
Views: 907
Size: 55.1 KB

Name: IMAG1048.jpg
Views: 916
Size: 30.9 KB

Name: IMAG1049.jpg
Views: 911
Size: 81.0 KB

77chris03 · 02-26-2012, 11:45 PM

Name: IMAG1053.jpg
Views: 895
Size: 70.0 KB

tooter · 02-26-2012, 11:47 PM

Looks like blower heater harness.

**Classic Bowties** · 02-26-2012, 11:46 PM

Quote:

Originally Posted by 77chris03

HEI tach harness-dizzy to cluster-new...$20

That pictured new repro tach harness is the standard OE type, not the aftermarket HEI one. Mel

77chris03 · 02-26-2012, 11:50 PM

Quote:

Originally Posted by Classic Bowties

That pictured new repro tach harness is the standard OE type, not the aftermarket HEI one. Mel

thank you...now i remember why i didnt use it...lol will make correction..

77chris03 · 02-26-2012, 11:59 PM

i gotta get to bed....work calls early.. will reply to all postings in the morning. tooter, you have first grab on what you asked for.

tooter · 02-27-2012, 01:08 PM

Sorry I have to pass for now, Funds are lower than I thought.

**FL71C10** · 02-27-2012, 03:29 PM

I'll take the stepside light buckets. Please pm me total to zip 32803.

Thanks!

**WIDESIDE72** · 02-27-2012, 07:52 PM

Would you take $20 including shipping for the tach harness to Lolita TX 77971?

77chris03 · 02-27-2012, 11:10 PM

Quote:

Originally Posted by tooter

Sorry I have to pass for now, Funds are lower than I thought.

k, let me know if you change ur mind. until then, they are still up for grabs

77chris03 · 02-27-2012, 11:12 PM

Quote:

Originally Posted by WIDESIDE72

Would you take $20 including shipping for the tach harness to Lolita TX 77971?

flat rate envelope is 5 bucks. 25 total...i gotta get 20 for it...im already at a loss on it, i paid 35 for it from outback truck parts here in spring...

Collin · 02-28-2012, 02:46 AM

Steel bezel pair still available? If so, I will take them pending shipping to 89012.

77chris03 · 02-28-2012, 08:48 AM

Quote:

Originally Posted by Collin

Steel bezel pair still available? If so, I will take them pending shipping to 89012.

Still available... med. flat rate box is 11 bucks...if you want i can see if they will fit in a padded envelope....will be 6 bucks if it does...

**WIDESIDE72** · 03-02-2012, 02:39 PM

Quote:

Originally Posted by 77chris03

flat rate envelope is 5 bucks. 25 total...i gotta get 20 for it...im already at a loss on it, i paid 35 for it from outback truck parts here in spring...

I just happend to think that I am running a HEI dist. Any idea what is involved in making this harness work? I believe the stock harness had a ring terminal to land thewire on the coil. I wonder if I could just change the terminal on the end to a spade?

77chris03 · 03-03-2012, 02:49 AM

Quote:

Originally Posted by WIDESIDE72

I just happend to think that I am running a HEI dist. Any idea what is involved in making this harness work? I believe the stock harness had a ring terminal to land thewire on the coil. I wonder if I could just change the terminal on the end to a spade?

ya that would work...let me know if you want it...its sitting in the dining room on the counter....

**leddzepp** · 03-04-2012, 12:07 PM

Quote:

Originally Posted by WIDESIDE72

I just happend to think that I am running a HEI dist. Any idea what is involved in making this harness work? I believe the stock harness had a ring terminal to land thewire on the coil. I wonder if I could just change the terminal on the end to a spade?

You most certainly can. I modified 2 harnesses this way. When you order one for HEI the only difference is the terminal.

77chris03 · 03-11-2012, 03:30 AM

got it...will ship out tomorrow or monday...

77chris03 · 03-03-2012, 02:59 AM

Tach harness---25 shipped!!!!

02-26-2012, 11:19 PM	#1
77chris03 Registered User Join Date: Jun 2009 Location: CoNrOe Tx Posts: 1,343	67-72 parts for sale....need to recoop... need to recoop on some parts i have left over and fund a little bit more of my build.... all items are listed as stated plus shipping. if it will fit in a flat rate box then it will go in a flat rate box. i charge what they charge me.. steel bezels, pair , no dents. needs blasted and paint/powder coat...$30 thanks collin drivers aluminum bezel, has two small dents...$5 drivers side step bracket, not bends, only surface rust...$10 L-6 motor stands blasted and POR...$25 hood hinges, some play, but still feels tight, had blasted been sitting...$30 headlight assembly, ring, bulb(bad?)and bucket...$50 for both 60 shipped grille bowties, one decent driver(no pitting), other you decide...$15 for both 20 shipped brake proportioning valve mount...[COLOR="Red"][B]$10 shipped[COLOR="Red"][B] ignition switch with old&new cylinder/keys, retainer and bezel...$40 shipped gas pedal assembly ..$50 thanks aaron new tall water pump stainless bolt kit...$25 shipped rag joint and inter. shaft, seal not blown out...$35 set 2 other inter. shafts with seal leaking...$15 for both or $7 ea lower control arm u bolts OEM...all 6 for $40 all good threads OE tach harness-repop. new...$20 bought from outback...thanks Wideside unknown harness(someone chime in)blower heater harness??...[COLOR="blue"][B]$15 shipped [COLOR="blue"][B] stepside light buckets(i shaved mine...) $3 for the pair?? thanks john __________________ 68 C10 Stepper #1- GONE 68 C10 Stepper #2 1977 Chevy Cheyenne...gone...was my first Chevy 04 Tahoe Z71, 04 Silverado 2500HD, 04 Sierra 2500HD 99 Sierra Stepside, 17 Denali HD, 84 K10 My 1st build-- http://67-72chevytrucks.com/vboard/s...d.php?t=379333 My 2nd build-- http://67-72chevytrucks.com/vboard/s...d.php?t=700310 Last edited by 77chris03; 03-11-2012 at 01:17 PM. Reason: price and status update

02-26-2012, 11:30 PM	#2
77chris03 Registered User Join Date: Jun 2009 Location: CoNrOe Tx Posts: 1,343	Re: 67-72 parts for sale....need to recoop... __________________ 68 C10 Stepper #1- GONE 68 C10 Stepper #2 1977 Chevy Cheyenne...gone...was my first Chevy 04 Tahoe Z71, 04 Silverado 2500HD, 04 Sierra 2500HD 99 Sierra Stepside, 17 Denali HD, 84 K10 My 1st build-- http://67-72chevytrucks.com/vboard/s...d.php?t=379333 My 2nd build-- http://67-72chevytrucks.com/vboard/s...d.php?t=700310

02-26-2012, 11:36 PM	#3
77chris03 Registered User Join Date: Jun 2009 Location: CoNrOe Tx Posts: 1,343	Re: 67-72 parts for sale....need to recoop... __________________ 68 C10 Stepper #1- GONE 68 C10 Stepper #2 1977 Chevy Cheyenne...gone...was my first Chevy 04 Tahoe Z71, 04 Silverado 2500HD, 04 Sierra 2500HD 99 Sierra Stepside, 17 Denali HD, 84 K10 My 1st build-- http://67-72chevytrucks.com/vboard/s...d.php?t=379333 My 2nd build-- http://67-72chevytrucks.com/vboard/s...d.php?t=700310

02-26-2012, 11:42 PM	#4
tooter Registered User Join Date: Dec 2010 Location: Moss Point , Ms Posts: 1,342	Re: 67-72 parts for sale....need to recoop... I'm interested in all 3 HL bezels, grill emblems, an ing.sw,pending group price shipped 39562--should fit med. fl rate?? __________________ My Ole 67 http://67-72chevytrucks.com/vboard/s...d.php?t=505830

02-26-2012, 11:38 PM	#6
77chris03 Registered User Join Date: Jun 2009 Location: CoNrOe Tx Posts: 1,343	Re: 67-72 parts for sale....need to recoop... __________________ 68 C10 Stepper #1- GONE 68 C10 Stepper #2 1977 Chevy Cheyenne...gone...was my first Chevy 04 Tahoe Z71, 04 Silverado 2500HD, 04 Sierra 2500HD 99 Sierra Stepside, 17 Denali HD, 84 K10 My 1st build-- http://67-72chevytrucks.com/vboard/s...d.php?t=379333 My 2nd build-- http://67-72chevytrucks.com/vboard/s...d.php?t=700310

02-26-2012, 11:41 PM	#7
77chris03 Registered User Join Date: Jun 2009 Location: CoNrOe Tx Posts: 1,343	Re: 67-72 parts for sale....need to recoop... __________________ 68 C10 Stepper #1- GONE 68 C10 Stepper #2 1977 Chevy Cheyenne...gone...was my first Chevy 04 Tahoe Z71, 04 Silverado 2500HD, 04 Sierra 2500HD 99 Sierra Stepside, 17 Denali HD, 84 K10 My 1st build-- http://67-72chevytrucks.com/vboard/s...d.php?t=379333 My 2nd build-- http://67-72chevytrucks.com/vboard/s...d.php?t=700310

02-26-2012, 11:44 PM	#8
77chris03 Registered User Join Date: Jun 2009 Location: CoNrOe Tx Posts: 1,343	Re: 67-72 parts for sale....need to recoop... __________________ 68 C10 Stepper #1- GONE 68 C10 Stepper #2 1977 Chevy Cheyenne...gone...was my first Chevy 04 Tahoe Z71, 04 Silverado 2500HD, 04 Sierra 2500HD 99 Sierra Stepside, 17 Denali HD, 84 K10 My 1st build-- http://67-72chevytrucks.com/vboard/s...d.php?t=379333 My 2nd build-- http://67-72chevytrucks.com/vboard/s...d.php?t=700310

02-26-2012, 11:45 PM	#9
77chris03 Registered User Join Date: Jun 2009 Location: CoNrOe Tx Posts: 1,343	Re: 67-72 parts for sale....need to recoop... __________________ 68 C10 Stepper #1- GONE 68 C10 Stepper #2 1977 Chevy Cheyenne...gone...was my first Chevy 04 Tahoe Z71, 04 Silverado 2500HD, 04 Sierra 2500HD 99 Sierra Stepside, 17 Denali HD, 84 K10 My 1st build-- http://67-72chevytrucks.com/vboard/s...d.php?t=379333 My 2nd build-- http://67-72chevytrucks.com/vboard/s...d.php?t=700310

02-26-2012, 11:47 PM	#10
tooter Registered User Join Date: Dec 2010 Location: Moss Point , Ms Posts: 1,342	Re: 67-72 parts for sale....need to recoop... Looks like blower heater harness. __________________ My Ole 67 http://67-72chevytrucks.com/vboard/s...d.php?t=505830

02-26-2012, 11:59 PM	#13
77chris03 Registered User Join Date: Jun 2009 Location: CoNrOe Tx Posts: 1,343	Re: 67-72 parts for sale....need to recoop... i gotta get to bed....work calls early.. will reply to all postings in the morning. tooter, you have first grab on what you asked for. __________________ 68 C10 Stepper #1- GONE 68 C10 Stepper #2 1977 Chevy Cheyenne...gone...was my first Chevy 04 Tahoe Z71, 04 Silverado 2500HD, 04 Sierra 2500HD 99 Sierra Stepside, 17 Denali HD, 84 K10 My 1st build-- http://67-72chevytrucks.com/vboard/s...d.php?t=379333 My 2nd build-- http://67-72chevytrucks.com/vboard/s...d.php?t=700310

02-27-2012, 01:08 PM	#14
tooter Registered User Join Date: Dec 2010 Location: Moss Point , Ms Posts: 1,342	Re: 67-72 parts for sale....need to recoop... Sorry I have to pass for now, Funds are lower than I thought. __________________ My Ole 67 http://67-72chevytrucks.com/vboard/s...d.php?t=505830

02-27-2012, 03:29 PM	#15
FL71C10 Senior Member Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,512	Re: 67-72 parts for sale....need to recoop... I'll take the stepside light buckets. Please pm me total to zip 32803. Thanks! __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

02-27-2012, 07:52 PM	#16
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: 67-72 parts for sale....need to recoop... Would you take $20 including shipping for the tach harness to Lolita TX 77971?

02-28-2012, 02:46 AM	#19
Collin Registered User Join Date: Dec 2011 Location: Las Vegas, NV Posts: 54	Re: 67-72 parts for sale....need to recoop... Steel bezel pair still available? If so, I will take them pending shipping to 89012. __________________ -1972 C10 (barn find) -1997 Carpenter Crown School Bus conversion - A.k.a. The Bustache - check it out: http://www.facebook.com/Bustache

03-11-2012, 03:30 AM	#24
77chris03 Registered User Join Date: Jun 2009 Location: CoNrOe Tx Posts: 1,343	Re: 67-72 parts for sale....need to recoop... got it...will ship out tomorrow or monday... __________________ 68 C10 Stepper #1- GONE 68 C10 Stepper #2 1977 Chevy Cheyenne...gone...was my first Chevy 04 Tahoe Z71, 04 Silverado 2500HD, 04 Sierra 2500HD 99 Sierra Stepside, 17 Denali HD, 84 K10 My 1st build-- http://67-72chevytrucks.com/vboard/s...d.php?t=379333 My 2nd build-- http://67-72chevytrucks.com/vboard/s...d.php?t=700310



Register or Log In To remove these advertisements.

03-03-2012, 02:59 AM	#25
77chris03 Registered User Join Date: Jun 2009 Location: CoNrOe Tx Posts: 1,343	Re: 67-72 parts for sale....need to recoop... Tach harness---25 shipped!!!! __________________ 68 C10 Stepper #1- GONE 68 C10 Stepper #2 1977 Chevy Cheyenne...gone...was my first Chevy 04 Tahoe Z71, 04 Silverado 2500HD, 04 Sierra 2500HD 99 Sierra Stepside, 17 Denali HD, 84 K10 My 1st build-- http://67-72chevytrucks.com/vboard/s...d.php?t=379333 My 2nd build-- http://67-72chevytrucks.com/vboard/s...d.php?t=700310

Register or Log In To remove these advertisements.