Recommended headers (ls) for dropmember 67-72?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jtp67-72 · 03-11-2012, 11:29 PM

Anyone have pics on stage 2 dropmember they will share? I am looking now but don't want to buy wrong set!! Seen d.t's and dynotech's but still unsure if fit is there......thanx jim

c10seconds · 03-12-2012, 04:42 AM

I have my LS installed with the stage 2 DM. I am looking for headers that will fit as well. Wondering what will work with the steering linkage.
Posted via Mobile Device

nibs · 03-12-2012, 10:38 AM

Hey guys, I was in the same situation and I found this guys build on Porterbuilt's website. They are Pacesetter 72C2256

I bought them after I saw the fitment pics, and the price was right too. I payed $400 shipped brand new on eBay. I guess Nate suggested these to him

jtp67-72 · 03-12-2012, 10:50 AM

Tell me about the slip on collectors--always used to a bolted flange--do they come with slip on clamps or do u have to purchase separate ??? Not sure i like that outward turn on drivers side but if it works!!!! thanx jim

BACKYARD88 · 03-15-2012, 11:55 AM

Quote:

Originally Posted by jtp67-72

...Not sure i like that outward turn on drivers side...

I don't care for it either. You also have to watch what you buy, I got a set of the 200.00 F-body headers off of eBay and they didn't fit. If Nate recommends a particular part number make sure that's the one you get

nibs · 03-12-2012, 10:59 AM

Im not quite sure I will use "slip on" feature. I will most likely weld on either a 3 bolt flange or a v-band flange

68GMCCustom · 03-15-2012, 03:58 PM

those are the 4th gen f-body headers that work for some...not so much for others.

edflores · 04-04-2012, 01:55 AM

Anything else?

jtp67-72 · 04-04-2012, 10:12 AM

Quote:

Originally Posted by edflores

Anything else?

Here's the link......
http://67-72chevytrucks.com/vboard/s...d.php?t=514041

Probably the ones I will use...stilll researching.............jim

gringoloco · 04-04-2012, 09:58 AM

There's a thread around here with Kooks TBSS headers on a DM setup...

edflores · 04-04-2012, 10:34 AM

Ouch.

BACKYARD88 · 04-28-2012, 02:33 AM

I tried the 5th gen eBay headers and they're a no go for frame laying.
Posted via Mobile Device

jtp67-72 · 04-28-2012, 02:58 PM

Quote:

Originally Posted by BACKYARD88

I tried the 5th gen eBay headers and they're a no go for frame laying.
Posted via Mobile Device

Thanx for info......jim

paul66c10 · 07-01-2012, 09:36 PM

Anyone thats tried the fbody headers with a dropmember have a pic of the driver side where the steering linkage would run? Thanks. I tried the Schoenfeld long tubes 1302ls1 but trying to route the steering linkage looks to be a problem and so far the drivers side header hits the rear of the control arm. Have not tried the pass side yet but dont look like there would be any clearance issues there.

BACKYARD88 · 07-16-2012, 11:08 PM

Quote:

Originally Posted by paul66c10

Anyone thats tried the fbody headers with a dropmember have a pic of the driver side where the steering linkage would run? Thanks. I tried the Schoenfeld long tubes 1302ls1 but trying to route the steering linkage looks to be a problem and so far the drivers side header hits the rear of the control arm. Have not tried the pass side yet but dont look like there would be any clearance issues there.

I don't have a pic handy but mine hit the rear of the drivers side lower arm.
Posted via Mobile Device

paul66c10 · 07-17-2012, 08:50 AM

Quote:

Originally Posted by BACKYARD88

I don't have a pic handy but mine hit the rear of the drivers side lower arm.
Posted via Mobile Device

did it just contact the lower arm or was it uninstallable completely? i dont mind having to bang a dimple in the tube to get it to clear.

BACKYARD88 · 07-19-2012, 09:52 PM

Quote:

Originally Posted by paul66c10

did it just contact the lower arm or was it uninstallable completely? i dont mind having to bang a dimple in the tube to get it to clear.

I beat a dent in the tube, then heated it and tried to bend it out of the way and it still wouldn't fit.
Posted via Mobile Device

paul66c10 · 07-20-2012, 09:12 AM

Quote:

Originally Posted by BACKYARD88

I beat a dent in the tube, then heated it and tried to bend it out of the way and it still wouldn't fit.
Posted via Mobile Device

gotcha, thanks for the input im thinking i may try the tbss long tubes from summit after looking at c10seconds thread with the mild dropmember and with me having the extreme dropmember the motor sits a bit higher and i think it'll work. we will see and i'll post up some results.

c10seconds · 07-03-2012, 06:18 PM

kooks 1 7/8" 4th gen f-body headers do not fit with the mild front dropmember. Just in case anyone was wondering

BigShoe24 · 07-08-2012, 06:38 PM

I went with the DT's. I have an original PB dropmember and they fit great.

gringoloco · 07-20-2012, 11:18 AM

Check out Amazon- they have the Pacesetter TBSS LTs $350 shipped...

paul66c10 · 07-20-2012, 11:26 AM

Quote:

Originally Posted by gringoloco

Check out Amazon- they have the Pacesetter TBSS LTs $350 shipped...

Thanks, ive found them on ebay for 297 shipped and summit has them for about 335 shipped but the wont ship out till 8/6

but as you mentioned that i went on amazon and found them for 253.00 shipped thanks Gringoloco!

gringoloco · 07-20-2012, 11:53 AM

Oh, yes. Uncoated- $250, ceramic-coated, $350. Great deal either way...

jtp67-72 · 07-20-2012, 06:39 PM

I'm leaning same way but look at pic 3 in post #12 of c10seconds......my motor with extreme is higher and closer to firewall.....although these are Kooks and the pacesetter pics show a different tube route.......
http://67-72chevytrucks.com/vboard/s...d.php?t=514041

paul66c10 · 07-20-2012, 10:12 PM

Quote:

Originally Posted by jtp67-72

I'm leaning same way but look at pic 3 in post #12 of c10seconds......my motor with extreme is higher and closer to firewall.....although these are Kooks and the pacesetter pics show a different tube route.......
http://67-72chevytrucks.com/vboard/s...d.php?t=514041

yea seems the pacesetters should clear in that area im more concerned about steering linkage. Will post up when i get them and installed not sure how long before i get the cab back on the frame though.

03-12-2012, 04:42 AM	#2
c10seconds Registered User Join Date: Oct 2009 Location: gilbert,AZ Posts: 947	Re: Recommended headers (ls) for dropmember 67-72?? I have my LS installed with the stage 2 DM. I am looking for headers that will fit as well. Wondering what will work with the steering linkage. Posted via Mobile Device

03-12-2012, 10:38 AM	#3
nibs JRods Garage Join Date: Dec 2009 Location: East Highland, CA Posts: 1,098	Re: Recommended headers (ls) for dropmember 67-72?? Hey guys, I was in the same situation and I found this guys build on Porterbuilt's website. They are Pacesetter 72C2256 I bought them after I saw the fitment pics, and the price was right too. I payed $400 shipped brand new on eBay. I guess Nate suggested these to him __________________ Orange Julius-My dropmember'd, LS'd, SWB street machine...

03-12-2012, 10:50 AM	#4
jtp67-72 Registered User Join Date: Apr 2007 Location: dequincy la. Posts: 1,465	Re: Recommended headers (ls) for dropmember 67-72?? Tell me about the slip on collectors--always used to a bolted flange--do they come with slip on clamps or do u have to purchase separate ??? Not sure i like that outward turn on drivers side but if it works!!!! thanx jim __________________ Build thread at http://67-72chevytrucks.com/vboard/s...d.php?t=475791

03-12-2012, 10:59 AM	#6
nibs JRods Garage Join Date: Dec 2009 Location: East Highland, CA Posts: 1,098	Re: Recommended headers (ls) for dropmember 67-72?? Im not quite sure I will use "slip on" feature. I will most likely weld on either a 3 bolt flange or a v-band flange __________________ Orange Julius-My dropmember'd, LS'd, SWB street machine...

03-15-2012, 03:58 PM	#7
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Recommended headers (ls) for dropmember 67-72?? those are the 4th gen f-body headers that work for some...not so much for others. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken

03-11-2012, 11:29 PM	#1
jtp67-72 Registered User Join Date: Apr 2007 Location: dequincy la. Posts: 1,465	Recommended headers (ls) for dropmember 67-72?? Anyone have pics on stage 2 dropmember they will share? I am looking now but don't want to buy wrong set!! Seen d.t's and dynotech's but still unsure if fit is there......thanx jim __________________ Build thread at http://67-72chevytrucks.com/vboard/s...d.php?t=475791

04-04-2012, 01:55 AM	#8
edflores Registered User Join Date: Jul 2005 Location: Riverside CA Posts: 860	Re: Recommended headers (ls) for dropmember 67-72?? Anything else?

04-04-2012, 09:58 AM	#10
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Recommended headers (ls) for dropmember 67-72?? There's a thread around here with Kooks TBSS headers on a DM setup... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

04-04-2012, 10:34 AM	#11
edflores Registered User Join Date: Jul 2005 Location: Riverside CA Posts: 860	Re: Recommended headers (ls) for dropmember 67-72?? Ouch.

04-28-2012, 02:33 AM	#12
BACKYARD88 On the fast track to nowhere.. Join Date: May 2006 Location: Splendora, Texas Posts: 5,316	Re: Recommended headers (ls) for dropmember 67-72?? I tried the 5th gen eBay headers and they're a no go for frame laying. Posted via Mobile Device __________________ -Mike Owen- Support the board here! 71 Chevy short fleet build thread Double D Norwood, Houston, Cecilia, Jackson, Monroe and counting

07-01-2012, 09:36 PM	#14
paul66c10 Registered User Join Date: Oct 2005 Location: chesapeake, va Posts: 89	Re: Recommended headers (ls) for dropmember 67-72?? Anyone thats tried the fbody headers with a dropmember have a pic of the driver side where the steering linkage would run? Thanks. I tried the Schoenfeld long tubes 1302ls1 but trying to route the steering linkage looks to be a problem and so far the drivers side header hits the rear of the control arm. Have not tried the pass side yet but dont look like there would be any clearance issues there. __________________ 1986 gmc shortbed (right now its rough) porterbuilt dropmember front mmw flat plate uppers and lowers, soon to have porterbuilt rear dropmember, painted cherry red rallies, flat green primer in the works with a gloss white roof, 92 civic dx daily beater, 01 z06 new toy

07-03-2012, 06:18 PM	#19
c10seconds Registered User Join Date: Oct 2009 Location: gilbert,AZ Posts: 947	Re: Recommended headers (ls) for dropmember 67-72?? kooks 1 7/8" 4th gen f-body headers do not fit with the mild front dropmember. Just in case anyone was wondering

07-08-2012, 06:38 PM	#20
BigShoe24 True Addiction Join Date: Nov 2005 Location: FTL Posts: 415	Re: Recommended headers (ls) for dropmember 67-72?? I went with the DT's. I have an original PB dropmember and they fit great. __________________ RCC

07-20-2012, 11:18 AM	#21
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Recommended headers (ls) for dropmember 67-72?? Check out Amazon- they have the Pacesetter TBSS LTs $350 shipped... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

07-20-2012, 11:53 AM	#23
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Recommended headers (ls) for dropmember 67-72?? Oh, yes. Uncoated- $250, ceramic-coated, $350. Great deal either way... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy



Register or Log In To remove these advertisements.

07-20-2012, 06:39 PM	#24
jtp67-72 Registered User Join Date: Apr 2007 Location: dequincy la. Posts: 1,465	Re: Recommended headers (ls) for dropmember 67-72?? I'm leaning same way but look at pic 3 in post #12 of c10seconds......my motor with extreme is higher and closer to firewall.....although these are Kooks and the pacesetter pics show a different tube route....... http://67-72chevytrucks.com/vboard/s...d.php?t=514041 __________________ Build thread at http://67-72chevytrucks.com/vboard/s...d.php?t=475791

Register or Log In To remove these advertisements.