RI Parting 68 250.

[old Chevy guy]

I have a 250 6 cylinder that I am going to part out unless of course someone wants the whole thing. It is supposed to run but I never heard it and cant garantee it. I would take $200 complete no garantee. Exaust manifold $40 Intake $40 Both together $60 HEI distributer with cap and wires including the coil $50 Head $100. Valve cover $15 oil pan $20. Theres a start,all prices are plus shipping. If theres anything else you want LMK. I'll post pictures of it tomorrow. Theres no power steering parts. Thanks for looking.

[68lowburb]

carb ?

[old Chevy guy]

Originally Posted by 68lowburb

carb ?

I found two mono jet carbs out here both were good a long time ago but both have rusty stuck butterflys. Im trying to go look at some parts off site if I can get there before the rain. I will see if I can do any better. If you were interested in these two for parts at all or IDK maybe you could reserect them? I will give you both for $20 plus the ship. If you buy The bumper brackets in the other thread they could all go together in one box. There still might be one with the other truck that goes with this 250 also. I'll let you know what I find. Frank

[old Chevy guy]

Originally Posted by 68lowburb

carb ?

I found a good monojet on a Nova I had it all moves free was a running motor when I got the car but its been sitting about two years or so,prime for a rebuild though. If your interested LMK I can shoot you some pics $35 plus ship?

[old Chevy guy]

The carb is not on it but I bought 2 trucks as a package,project that PO lost interest in deal. The carb is in a box somewhere I dont have it here yet but can look for it tomorrow or I might have another around here somewhere,I can let you know what I find. Thanks Frank

[68lowburb]

np thanks

[70blazer]

I will take the HEI distributor and coil, shipped to 84318 if you can get me a shipping quote. I also need the pulleys, fan and fan pulley and crank pulley if you have them. PM me total and your e-mail for PayPal.

Thanks..
Posted via Mobile Device

[longbed67]

How about the pulleys? are they single or double?

[old Chevy guy]

70blazer your first up on the pulleys and the dist. longbed67 your second in line for pulleys ,the pulleys are double. I'm pretty sure I have another set of pulleys not sure if they are single or double.will check in the daylight. So, between the two of you who needs single and who needs double? Maybe theres enough stuff to satisfy everybody!

[longbed67]

I need the double ones for my setup...

[old Chevy guy]

I'll see what I can do.

[70blazer]

I need double pulleys as well to convert to power steering. I will watch for your total and get you paid. Thanks!
Posted via Mobile Device

[RJGeister]

OCG,
Still got the monojet carbs? Any lift points on the motor?
Thanks,
Rich Geister

[old Chevy guy]

Originally Posted by RJGeister

OCG,
Still got the monojet carbs? Any lift points on the motor?
Thanks,
Rich Geister

Still have the monojets,what are you interested in? theres no lift points on this motor but there may be on a diffrent one I have out here .I will check and let you know.

[RJGeister]

Still interested in the monojets. $20 + the ride? Await you word on the lift points.

[old Chevy guy]

So you want the two I offered 68 low burb for parts? I think they would both fit in a medium flat rate box $11.35. I have a better one that the movemt is free on also I offered low burb for $35. I think it might fit in the same box with the other two if you were interested I could let it go for $30. As to the lift points I just went out with a flashlight to look and the other motor has one on the back but no front. Not sure what its supposed to look like but I guess its the right one I can take a picture tomorrow and if its what you want I'll throw it in for another $5. LMK Frank

[L&L70]

How much for the exhaust manifold? 66048 No cracks?

Matt

[L&L70]

Sorry. Just realized I scanned right past the price. Wouls still need to know shipping.

[RJGeister]

Originally Posted by old Chevy guy

So you want the two I offered 68 low burb for parts? I think they would both fit in a medium flat rate box $11.35. I have a better one that the movemt is free on also I offered low burb for $35. I think it might fit in the same box with the other two if you were interested I could let it go for $30. As to the lift points I just went out with a flashlight to look and the other motor has one on the back but no front. Not sure what its supposed to look like but I guess its the right one I can take a picture tomorrow and if its what you want I'll throw it in for another $5. LMK Frank

Frank,
Yes on the carbs. All three for $50? Ride for $11.35? How about $60 for all 3 carbs shipped? Don't worry about the lift points.
Thanks,
Rich

[old Chevy guy]

I will weigh it and get you an estimate. No cracks that I know of but I will inspect it when I take it off. If not by days end then tomorrow. thanks

[old Chevy guy]

The shipping estimate is $18 so that would make it $58 total. If it goes over $20 ill pay the diffrence. I tried to get the stud out and couldnt ,if you say ''I will take it'' I will drill and tap the hole before I send it. LMK what you want to do. Thanks Frank

[L&L70]

I will take it. Let me know how to pay and when! Thanks alot

Matt

[L&L70]

Oh and just checking that it is crack free and no warping or anything.

Matt

[old Chevy guy]

It will be by paypal,when I fix the hole I will send you a PM with the info. Give me a day to get it done. Will have to work on it after work tomorrow. No cracks that I can see. I'll throw a straight edge on it to looke for warp but I think your good. Frank

[old Chevy guy]

If I can in fact get them all in this box its a deal. Let you know tomorrow,as they say if it fits,it ships.